Erik,

Your correct, I can do everything from the router, but
from an internal computer all I cn get to are ip# say
less than 200.? and there is no dns working on the
internal but 100% on the router.

Look at this log file.

ifcongfig -a

ae0:
flags=8863<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST>
mtu 1500
	address: 00:00:94:21:72:68
	media: Ethernet manual
	inet 192.168.1.2 netmask 0xffffff00 broadcast
192.168.1.255
ae1:
flags=8863<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST>
mtu 1500
	address: 00:00:94:07:ca:13
	media: Ethernet manual
	inet 63.162.21.215 netmask 0xffffff80 broadcast
255.255.255.255
lo0: flags=8009<UP,LOOPBACK,MULTICAST> mtu 32976
	inet 127.0.0.1 netmask 0xff000000 
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
ppp1: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
tun0: flags=10<POINTOPOINT> mtu 1500
tun1: flags=10<POINTOPOINT> mtu 1500
macbsd# cat/etc/ipnat.conf

#Basic for non-static IPs on external I/F ae1
map ae1 192.168.1.0/24 -> 0.0.0.0/32 proxy port ftp
ftp/tcp 
map ae1 192.168.1.0/24 -> 0.0.0.0/32 portmap tcp/udp
10000:40000
map ae1 192.168.1.0/24 -> 0.0.0.0/32
macbsd# cat resolv.conf

search buckeyecablesystem.com
nameserver 208.16.180.5
nameserver 208.16.180.6
macbsd# 

Any suggestions on the ipnat?

Thanks 
Ron



This is definitly a NAT issue.  The configuration must
be wrong.  Here
is a
sample:

map hme0 10.10.10.0/24 -> 192.168.1.1/32 proxy port
ftp ftp/tcp
map hme0 10.10.10.0/24 -> 192.168.1.1//32 portmap
tcp/udp 1:65535
map hme0 10.10.10.0/24 -> 192.168.1.1//32

in the above case, hme0 is my external interface and
is assigned the
address 192.168.1.1 and 10.10.10.0 is the internal
address space.

=====
Ron


=====
Ron
ronlandrus@yahoo.com
ronlandrus@myvzw.com
A web page...
http://www.geocities.com/ronlandrus/
A photo page...
http://photos.yahoo.com/ronlandrus

__________________________________________________
Do You Yahoo!?
Get email at your own domain with Yahoo! Mail. 
http://personal.mail.yahoo.com/