Ooops, my last message got truncated.   Here it is again:

Okay, here's what I get when I type startx from the twal# prompt:

xauth: (argv):1:  bad display name "twal:0" in "list" command
xauth: (stdin):1:  bad display name "twal:0" in "add" command

Couldn't open RGB_DB '/usr/X11R6/lib/X11/rgb'
-
-
-
X connection to :0.0 broken (explicit kill or server shutdown).
xauth: (argv):1:  bad display name "twal:0" in "remove" command


Okay, there's some othe stuff displayed between the "Couldn't open RGB_DB
'/usr/X11R6/lib/X11/rgb'" line and the "X connection to 0.0 broken (explicit
kill or server shutdown)." line.   The three vertical minus signs are not
actually displayed on the screen.   I just used them to represent the
additional lines that are displayed before the screen clears.

I'm hoping you can help me figure this out.   Obviously, something is just
not right.

Thanks,

William


> From: Hauke Fath <hauke@Espresso.Rhein-Neckar.DE>
> Date: Sun, 9 Oct 2005 22:44:19 +0200
> To: William Duke <wduke@cogeco.ca>
> Cc: <port-mac68k@NetBSD.org>
> Subject: Re: Trouble installing on Q700
> 
> At 20:29 Uhr -0400 8.10.2005, William Duke wrote:
>> Also, I have been unable to find any information on how to configure X
>> server on my Quadra.
> 
> The non-XFree86 X servers like Xmac68k and Xsun are dead simple: There _is_
> nothing to configure. We do not have driver support for changing colour
> depth, palette information or resolution on the onboard and nubus graphics
> adapters, so we rely on them being set up properly in MacOS.
> 
> You can choose between a 1 bit X server which is in the distribution and an
> 8 bit greyscale X server that has been floating around on ftp servers for
> many years without ever being integrated into the distribution. (Don't ask
> me why.)
> 
> Take your choice, adjust the depth in the booter accordingly, have X.
> 
> hauke
> 
> --
> "It's never straight up and down"     (DEVO)
> 
>