Re: Panic in netbsd-5 kernels?

[Izumi Tsutsui <tsutsui%ceres.dti.ne.jp@localhost>]

> Update - the panics are uvm_fault panics. Not sure what's up, but:

Why don't you post dmesg and backtrace?

> The machine is a Quadra 630 with an IDE disk. This is the only IDE mac68k 
> machine I'm running, and I haven't run any IDE mac68k machines in years.
> 
> It's happening with NetBSD 5.0 and 5.0.1 as well as netbsd-5 from the last 
> few days, but not with NetBSD 4.0.1 or current from today.
> 
> My other mac68k machines are running all of these kernel versions just 
> fine.
> 
> Is anyone else running NetBSD 5 on an IDE mac68k machine?

5.0.1 seems working on LC630 (at least on single user):

---
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.0.1 (GENERIC) #0: Wed Jul 29 21:42:20 UTC 2009
        
builds%b8.netbsd.org@localhost:/home/builds/ab/netbsd-5-0-1-RELEASE/mac68k/200907292356Z-obj/home/builds/ab/netbsd-5-0-1-RELEASE/src/sys/arch/mac68k/compile/GENERIC
Apple Macintosh Quadra 630  (68040)
cpu: delay factor 1058
fpu: emulator
total memory = 36864 KB
avail memory = 31376 KB
mrg: 'Quadra630 ROMs' ROM glue, tracing off, debug off, silent traps
mainbus0 (root)
obio0 at mainbus0
esp0 at obio0 addr 0 (quick): address 0x3a1000: NCR53C96, 16MHz, SCSI ID 7
scsibus0 at esp0: 8 targets, 8 luns per target
wdc0 at obio0 (Quadra/Performa series IDE interface)
atabus0 at wdc0 channel 0
adb0 at obio0
asc0 at obio0: Apple Sound Chip
intvid0 at obio0 @ f9001000: Valkyrie video subsystem
intvid0: 832 x 624, monochrome
macfb0 at intvid0
wsdisplay0 at macfb0 (kbdmux ignored)
sn0 at obio0: integrated SONIC Ethernet adapter
sn0: Ethernet address 08:00:07:9f:07:c6
iwm0 at obio0: Apple GCR floppy disk controller
iwm: Chip revision not supported (-77)
zsc0 at obio0 chip type 0 
zsc0 channel 0: d_speed   9600 DCD clk 0 CTS clk 0
zstty0 at zsc0 channel 0 (console i/o)
zsc0 channel 1: d_speed   9600 DCD clk 0 CTS clk 0
zstty1 at zsc0 channel 1
nubus0 at mainbus0
scsibus0: waiting 2 seconds for devices to settle...
adb0 (direct, Cuda): 2 targets
aed0 at adb0 addr 0: ADB Event device
akbd0 at adb0 addr 2: keyboard II (Japanese layout)
wskbd0 at akbd0 (mux ignored)
ams0 at adb0 addr 3: 1-button, 100 dpi mouse
wsmouse0 at ams0 (mux ignored)
sd0 at scsibus0 target 0 lun 0: <SEAGATE, ST51080N, 0958> disk fixed
sd0: 1030 MB, 4826 cyl, 4 head, 109 sec, 512 bytes/sect x 2109840 sectors
sd0: sync (248.00ns offset 15), 8-bit (4.032MB/s) transfers, tagged queueing
wd0 at atabus0 drive 0: <IBM-DALA-3360>
wd0: 348 MB, 929 cyl, 16 head, 48 sec, 512 bytes/sect x 713472 sectors
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
WARNING: preposterous TOD clock time
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
Enter pathname of shell or RETURN for /bin/sh: 
We recommend creating a non-root account and using su(1) for root access.
No entry for terminal type "dumb";
using dumb terminal settings.
# mount -a
# dhclient sn0
Internet Systems Consortium DHCP Client V3.0.3
Copyright 2004-2005 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/products/DHCP

Listening on BPF/sn0/08:00:07:9f:07:c6
Sending on   BPF/sn0/08:00:07:9f:07:c6
Sending on   Socket/fallback
DHCPREQUEST on sn0 to 255.255.255.255 port 67
DHCPACK from 192.168.20.1

bound to 192.168.20.35 -- renewal in 6609 seconds.
# 

---
Izumi Tsutsui