NetBSD-current on Quadra 610

[John Klos <john%ziaspace.com@localhost>]

Hi,

Just a note to point out that -current after the optimization flag change 
(http://mail-index.netbsd.org/port-m68k/2014/06/22/msg000488.html) works 
fine on a Macintosh Quadra 610. It also works with Rob's patch to allow 
128 meg SIMMs, which is how this machine has 260 megs of memory.

Next week I'll try out a Quadra 800 system with 520 megs.

Thanks,
John


Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.99.46 (BRIGGS-$Revision: 6.999 $) #0: Tue Jul  8 22:01:50 UTC 2014

john%chi.ziaspace.com@localhost:/usr/current/obj-mac68k/sys/arch/mac68k/compile/BRIGGS
Apple Macintosh Quadra 610  (68040)
cpu: delay factor 1601
fpu: mc68040
total memory = 260 MB
avail memory = 249 MB
sysctl_createv: sysctl_locate(multicast) returned 2
sysctl_createv: sysctl_locate(multicast_kludge) returned 2
timecounter: Timecounters tick every 16.666 msec
mrg: 'Quadra/Centris ROMs' ROM glue, tracing off, debug off, silent traps
mainbus0 (root)
obio0 at mainbus0
esp0 at obio0 addr 0 (quick): address 0x433000: NCR53C96, 16MHz, SCSI ID 7
scsibus0 at esp0: 8 targets, 8 luns per target
adb0 at obio0
asc0 at obio0: Apple Sound Chip
intvid0 at obio0 @ f9000080: DAFB video subsystem, monitor sense 1
intvid0: 1152 x 870, monochrome
macfb0 at intvid0
wsdisplay0 at macfb0 (kbdmux ignored): console (std, vt100 emulation)
sn0 at obio0: integrated SONIC Ethernet adapter
sn0: Ethernet address 08:00:07:9c:1e:c8
iwm0 at obio0: Apple GCR floppy disk controller
fd0 at iwm0 drive 0: (HD disk -- not supported)
fd1 at iwm0 drive 1: (HD disk -- not supported)
zsc0 at obio0 chip type 0
zsc0 channel 0: d_speed   9600 DCD clk 0 CTS clk 0
zstty0 at zsc0 channel 0
zsc0 channel 1: d_speed   9600 DCD clk 0 CTS clk 0
zstty1 at zsc0 channel 1
nubus0 at mainbus0
ae0 at nubus0 slot e: EtherNet card, 64KB memory
ae0: Ethernet address 00:80:19:29:1c:f7
timecounter: Timecounter "clockinterrupt" frequency 60 Hz quality 0
timecounter: Timecounter "VIA1 T2" frequency 783360 Hz quality 100
scsibus0: waiting 2 seconds for devices to settle...
adb0 (direct, II series): 2 targets
aed0 at adb0 addr 0: ADB Event device
akbd0 at adb0 addr 2: keyboard II
wskbd0 at akbd0 (mux ignored): console keyboard, using wsdisplay0
ams0 at adb0 addr 3: EMP mouse <ALP3> 3-button, 480 dpi
wsmouse0 at ams0 (mux ignored)
sd0 at scsibus0 target 0 lun 0: <ATA, Hitachi HDS72161, P22O> disk fixed
sd0: 149 GB, 77525 cyl, 64 head, 63 sec, 512 bytes/sect x 312581808 sectors
sd0: sync (248.00ns offset 14), 8-bit (4.032MB/s) transfers
swwdog0: software watchdog initialized
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs