Port-mac68k archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: NetBSD-current on Quadra 610
john@ wrote:
> >> Just a note to point out that -current after the optimization flag change
> >> (http://mail-index.netbsd.org/port-m68k/2014/06/22/msg000488.html) works
> >> fine on a Macintosh Quadra 610. It also works with Rob's patch to allow
> >> 128 meg SIMMs, which is how this machine has 260 megs of memory.
> >
> > Does a kernel built with gcc 4.8 still have problem on mac68k?
>
> I haven't seen any problems with a kernel compiled from 8-July sources
> even with weeks of compiling, and a netbsd-7 kernel and userland compiled
> from this morning at least boots and has been compiling for a few hours
> without problems.
Do you explicitly specify HAVE_GCC=48 somewhere, or
you just tried it with the default gcc 4.5.3?
If you are using the default gcc 4.5.3,
your first post means that kernels compiled by gcc 4.5.3
with -O2 didn't work but works with -O2 -fno-reorder-blocks?
---
Izumi Tsutsui
Home |
Main Index |
Thread Index |
Old Index