Subject: Re: dropping packets
To: Donald Lee <MacPPC1@caution.icompute.com>
From: Chaz McGarvey <chaz@brokenzipper.com>
List: port-macppc
Date: 12/17/2004 00:21:33
On Dec 16, 2004, at 11:18 PM, Donald Lee wrote:
>> On Dec 16, 2004, at 6:34 AM, Cameron Kaiser wrote:
>>
>>>> My PowerMac 7300 seems to be dropping quite a few packets (about
>>>> 40%)
>>>> with NetBSD 2.0 stable (generic). I searched the list archives and
>>>> read quite a few similar inquiries, and a lot of them had 7300s as
>>>> well. I couldn't really find a solution, though. Is there one?
>>>> I had 1.6.2 installed a little while ago and networking was
>>>> completely
>>>> unusable, dropping almost everything. NetBSD 2.0 seems to have
>>>> made a
>>>> significant improvement (ftp transfers over the LAN download at
>>>> about
>>>> 950kbps, whereas before I was lucky to even get a connection). I've
>>>> never had to deal with any kernel dropping packets, so I'm just
>>>> wondering what can be done about it.
>>>
>>> Is this with the original 604 installed? I run 1.6.2 on my 7300 with
>>> a Sonnet
>>> G3/500, and I haven't had any problems with dropped packets through
>>> the
>>> motherboard Ethernet or the second rtk-based PCI Ethernet.
>>
>> Yes, it has the original processor. I do have a PowerLogix G4/500
>> card
>> that I've used in it before when Mac OS was on the machine. I'll put
>> that back in and see if things are better.
>>
>> Thanks,
>> chaz
>
> Careful....
>
> Some of these older outrigger machines had problems with the onboard
> ethernet HW failling like this. This is well documented in some of the
> 7200 models, but I've seen it on my own machines where it fails by
> simply
> getting flaky. My fix was to use a pci ethernet card.
>
> My experience was with Mac OS 8/9, so NetBSD drivers are _not_ the
> culprit. ;->
Yeah, I'm confident the drivers are fine. Flaky hardware is what I
initially guessed, and the processor upgrade didn't help. Although I do
think there was something wrong with 1.6.2 because I could hardly make a
connection. But NetBSD 2.0 works at least as good as Mac OS did for
networking.
So now my question is what (cheap) PCI NICs are available/recommended?
Thanks,
chaz