Port-macppc archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
smartbat hacking
I wanted my computer to be aware of its battery even after the sysmon
change, so I hacked on smartbat.c, taking parts from battery.c and
pm_direct.c. The attached version compiles and seems to work. Add
smartbat* at pmu?
options SMARTBAT_DEBUG
to your kernel configuration.
I'm not sure if all sensors work as they should yet, but I wanted to
throw this out for public view.
Magnus
/* $NetBSD: smartbat.c,v 1.2 2008/04/29 06:53:02 martin Exp $ */
/*-
* Copyright (c) 2007 Michael Lorenz
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: smartbat.c,v 1.2 2008/04/29 06:53:02 martin Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/device.h>
#include <sys/proc.h>
#include <dev/sysmon/sysmonvar.h>
#include <dev/sysmon/sysmon_taskq.h>
#include <macppc/dev/pmuvar.h>
#include <macppc/dev/batteryvar.h>
#include <machine/bus.h>
#include "opt_battery.h"
#ifdef SMARTBAT_DEBUG
#define DPRINTF printf
#else
#define DPRINTF while (0) printf
#endif
#define BAT_AC_PRESENT 0
#define BAT_PRESENT 1
#define BAT_VOLTAGE 2
#define BAT_CURRENT 3
#define BAT_MAX_CHARGE 4
#define BAT_CHARGE 5
#define BAT_CHARGING 6
#define BAT_FULL 7
#define BAT_NSENSORS 8 /* number of sensors */
struct smartbat_softc {
struct device sc_dev;
struct pmu_ops *sc_pmu_ops;
int sc_num;
/* envsys stuff */
struct sysmon_envsys *sc_sme;
envsys_data_t sc_sensor[BAT_NSENSORS];
struct sysmon_pswitch sc_sm_acpower;
/* battery status */
int sc_flags;
int sc_oflags;
int sc_voltage;
int sc_charge;
int sc_max_charge;
int sc_draw;
int sc_current;
int sc_time;
uint32_t sc_timestamp;
};
static void smartbat_attach(struct device *, struct device *, void *);
static int smartbat_match(struct device *, struct cfdata *, void *);
static void smartbat_setup_envsys(struct smartbat_softc *);
static void smartbat_refresh(struct sysmon_envsys *, envsys_data_t *);
static void smartbat_poll(void *);
static int smartbat_update(struct smartbat_softc *, int);
CFATTACH_DECL(smartbat, sizeof(struct smartbat_softc),
smartbat_match, smartbat_attach, NULL, NULL);
static int
smartbat_match(struct device *parent, struct cfdata *cf, void *aux)
{
struct battery_attach_args *baa = aux;
if (baa->baa_type == BATTERY_TYPE_SMART)
return 1;
return 0;
}
static void
smartbat_attach(struct device *parent, struct device *self, void *aux)
{
struct battery_attach_args *baa = aux;
struct smartbat_softc *sc = (struct smartbat_softc *)self;
sc->sc_pmu_ops = baa->baa_pmu_ops;
sc->sc_num = baa->baa_num;
printf(" addr %d: smart battery\n", sc->sc_num);
smartbat_update(sc, 1);
/* trigger a status update */
sc->sc_oflags = ~sc->sc_flags;
smartbat_setup_envsys(sc);
sc->sc_pmu_ops->register_callback(sc->sc_pmu_ops->cookie, smartbat_poll,
sc);
memset(&sc->sc_sm_acpower, 0, sizeof(struct sysmon_pswitch));
sc->sc_sm_acpower.smpsw_name = "AC Power";
sc->sc_sm_acpower.smpsw_type = PSWITCH_TYPE_ACADAPTER;
if (sysmon_pswitch_register(&sc->sc_sm_acpower) != 0)
printf("%s: unable to register AC power status with sysmon\n",
sc->sc_dev.dv_xname);
}
#define INITDATA(index, unit, string) \
sc->sc_sensor[index].units = unit; \
snprintf(sc->sc_sensor[index].desc, \
sizeof(sc->sc_sensor[index].desc), "%s", string);
static void
smartbat_setup_envsys(struct smartbat_softc *sc)
{
int i;
sc->sc_sme = sysmon_envsys_create();
INITDATA(BAT_AC_PRESENT, ENVSYS_INDICATOR, "AC present");
INITDATA(BAT_PRESENT, ENVSYS_INDICATOR, "Battery present");
INITDATA(BAT_VOLTAGE, ENVSYS_SVOLTS_DC, "Battery voltage");
INITDATA(BAT_CURRENT, ENVSYS_SAMPS, "Battery current");
INITDATA(BAT_MAX_CHARGE, ENVSYS_INTEGER, "Battery design cap");
INITDATA(BAT_CHARGE, ENVSYS_INTEGER, "Battery charge");
INITDATA(BAT_CHARGING, ENVSYS_INDICATOR, "Battery charging");
INITDATA(BAT_FULL, ENVSYS_INDICATOR, "Battery full");
#undef INITDATA
for (i = 0; i < BAT_NSENSORS; i++) {
if (sysmon_envsys_sensor_attach(sc->sc_sme,
&sc->sc_sensor[i])) {
sysmon_envsys_destroy(sc->sc_sme);
return;
}
}
sc->sc_sme->sme_name = sc->sc_dev.dv_xname;
sc->sc_sme->sme_cookie = sc;
sc->sc_sme->sme_refresh = smartbat_refresh;
if (sysmon_envsys_register(sc->sc_sme)) {
aprint_error("%s: unable to register with sysmon\n",
sc->sc_dev.dv_xname);
sysmon_envsys_destroy(sc->sc_sme);
}
}
static void
smartbat_refresh(struct sysmon_envsys *sme, envsys_data_t *edata)
{
struct smartbat_softc *sc = sme->sme_cookie;
int which = edata->sensor;
smartbat_update(sc, 0);
switch (which) {
case BAT_AC_PRESENT:
edata->value_cur = (sc->sc_flags & PMU_PWR_AC_PRESENT);
break;
case BAT_PRESENT:
edata->value_cur = (sc->sc_flags & PMU_PWR_BATT_PRESENT);
break;
case BAT_VOLTAGE:
edata->value_cur = sc->sc_voltage * 1000;
break;
case BAT_CURRENT:
edata->value_cur = sc->sc_current * 1000;
break;
case BAT_MAX_CHARGE:
edata->value_cur = 100;
break;
case BAT_CHARGE:
edata->value_cur = sc->sc_charge;
break;
case BAT_CHARGING:
if ((sc->sc_flags & PMU_PWR_BATT_CHARGING) &&
(sc->sc_flags & PMU_PWR_AC_PRESENT))
edata->value_cur = 1;
else
edata->value_cur = 0;
break;
case BAT_FULL:
edata->value_cur = (sc->sc_flags & PMU_PWR_BATT_FULL);
break;
}
edata->state = ENVSYS_SVALID;
}
/*
* Thanks to Paul Mackerras and Fabio Riccardi's Linux implementation
* for a clear description of the PMU results.
*/
static int
smartbat_update(struct smartbat_softc *sc, int out)
{
int len;
uint8_t buf[16];
uint8_t battery_number;
if (sc->sc_timestamp == time_second)
return 0;
sc->sc_timestamp = time_second;
/* sc_num starts from 0, but we need to start from 1 */
battery_number = sc->sc_num + 1;
len = sc->sc_pmu_ops->do_command(sc->sc_pmu_ops->cookie,
PMU_SMART_BATTERY_STATE,
1, &battery_number,
16, buf);
if (len < 0) {
DPRINTF("%s: couldn't get battery data\n", sc->sc_dev.dv_xname);
/* XXX: the return value is never checked */
return -1;
}
/* Now, buf[0] is the command number, which we already know.
That's why all indexes are off by one compared to
pm_battery_info_smart in pm_direct.c.
*/
sc->sc_flags = buf[2];
/* XXX: are these all valid for smart batteries? */
if (out) {
printf(" flags: %x", buf[1]);
if (buf[2] & PMU_PWR_AC_PRESENT)
printf(" AC");
if (buf[2] & PMU_PWR_BATT_CHARGING)
printf(" charging");
if (buf[2] & PMU_PWR_BATT_PRESENT)
printf(" present");
if (buf[2] & PMU_PWR_BATT_FULL)
printf(" full");
printf("\n");
}
switch(buf[1]) {
case 3:
case 4:
sc->sc_charge = buf[3];
sc->sc_max_charge = buf[4];
sc->sc_draw = *((signed char *)&buf[5]);
sc->sc_voltage = buf[6];
break;
case 5:
sc->sc_charge = ((buf[3] << 8) | (buf[4]));
sc->sc_max_charge = ((buf[5] << 8) | (buf[6]));
sc->sc_draw = *((signed short *)&buf[7]);
sc->sc_voltage = ((buf[9] << 8) | (buf[8]));
break;
default:
/* XXX - Error condition */
DPRINTF("%s: why is buf[1] %x?\n", sc->sc_dev.dv_xname, buf[1]);
sc->sc_charge = 0;
sc->sc_max_charge = 0;
sc->sc_draw = 0;
sc->sc_voltage = 0;
break;
}
return 1;
}
static void
smartbat_poll(void *cookie)
{
struct smartbat_softc *sc = cookie;
smartbat_update(sc, 0);
if ((sc->sc_flags & PMU_PWR_AC_PRESENT) == sc->sc_oflags)
return;
sc->sc_oflags = sc->sc_flags & PMU_PWR_AC_PRESENT;
sysmon_pswitch_event(&sc->sc_sm_acpower,
sc->sc_oflags ? PSWITCH_EVENT_PRESSED :
PSWITCH_EVENT_RELEASED);
}
Home |
Main Index |
Thread Index |
Old Index