-current on 7600-type machine

[John Klos <john%ziaspace.com@localhost>]

Hi,

Has anyone tried current (from today) on a 7600-type machine? For me, the 
kernel boots to where it configures mc0, then this:

mc is not split
mc0 at obio0 offset 0x11000trap: kernel ISI by 0x7c3142a4 (SRR1 
0x40001032), lr: 0x484
778
panic: trap
Begin traceback...
0x006df670: at trap+0x100
0x006df700: kernel ISI trap by _prop_array_pool+0x7bcb1ae0: 
srr1=0x40001032
            r1=0x6df7c0 cr=0x33a33e33 xer=0xe000be6f ctr=0x7c3142a6
0x006df7c0: at mc_attach+0x80
0x006df800: at config_attach_loc+0x188
0x006df830: at obio_attach+0x2b4
0x006df950: at config_attach_loc+0x188
0x006df980: at pci_probe_device+0x324
0x006dfa00: at pci_enumerate_bus+0x1f8
0x006dfa40: at pcirescan+0x24
0x006dfa60: at pciattach+0x1e8
0x006dfaa0: at config_attach_loc+0x188
0x006dfad0: at bandit_attach+0x2d8
0x006dfbd0: at config_attach_loc+0x188
0x006dfc00: at mainbus_attach+0x120
0x006dfcd0: at config_attach_loc+0x188
0x006dfd00: at cpu_configure+0x158
0x006dfec0: at configure+0x3c
0x006dfee0: at main+0x15c
0x006dff30: at 0x100094
End traceback...
rebooting

EXIT called


I have a few PCI cards:

acardide0 at pci0 dev 13 function 0
acardide0: Acard ATP860-A Ultra66 IDE Controller (rev. 0x01)
acardide0: using irq 23 for native-PCI interrupt
atabus0 at acardide0 channel 0
atabus1 at acardide0 channel 1
ex0 at pci0 dev 14 function 0: 3Com 3c905-TX 10/100 Ethernet (rev. 0x0)
ex0: interrupting at irq 24
ex0: MAC address 00:60:97:a7:1e:ed
nsphy0 at ex0 phy 24: DP83840 10/100 media interface, rev. 1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
CMD Technology SiI3124 SATALink (miscellaneous mass storage, revision 0x02) at 
pci0 dev 15 function 0 not configured

Otherwise, this is a pretty straightforward 7600-type machine.

Anyone have any ideas?

John