Re: NetBSD 4.0.1 on 7300 with G3 card

[Michael <macallan%netbsd.org@localhost>]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello,

On Feb 9, 2009, at 5:19 PM, Georg Schwarz wrote:

> Am 09.02.2009 um 20:47 schrieb Michael:
>
> > > #define  L2RAM_FLOWTHRU_BURST   0x00000000
> > > #define  L2RAM_PIPELINE_BURST   0x01000000
> > > #define  L2RAM_PIPELINE_LATE    0x01800000
> >
> > pipeline burst is the most common type IIRC.
>
> seemed to do the trick:
>
> cpu0 at mainbus0: 750 (Revision 3.0), ID 0 (primary)
> cpu0: HID0 8290c0a4<EMCP,ECLK,DOZE,DPM,ICE,DCE,SGE,BTIC,BHT>,  
> powersave: 1
> cpu0: 500.00 MHz, no-parity 1MB WB L2 cache (PB SRAM) at 2:1 ratio

good :)

> > > So I think on NetBSD we should change in src/sys/dev/pci/pcidevs  
> > > the line
> > >
> > > product LUCENT EVDO             0x5802  Sierra Wireless AirCard 580
> > >
> > > into
> > >
> > > product LUCENT USBHC2           0x5802  2-port USB Host Controller
> > >
> > > and update src/sys/dev/pci/pcidevs.h and src/sys/dev/pci/ 
> > > pcidevs_data.h
> >
> > Agreed.
> done so, looks much nicer now :-)
> ohci0 at pci1 dev 9 function 0: Lucent Technologies 2-port USB Host  
> Controller (rev. 0x10)
>
> Should I commit it?

Yes, please. It's misleading as it is now.

> By the way, what about the swim3 controller? Is there no driver for  
> it?
>
> swim3 at obio0 offset 0x15000 not configured

I never got around to write a driver, neither did anyone else. Linux  
has got one though.

have fun
Michael

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.7 (Darwin)

iQEVAwUBSZDH08pnzkX8Yg2nAQLm4gf9FlIPZ1GeMTxDIssH6tQfiPbODlAEOaKQ
u7Q/Z8VQSb9L2NYN/Scuf2e2h4NkngFKXRciY+bV0zGKKZ/R8w15N4qqu36sspjw
PNHN2ZQJ5ePNBCPFi13r8MA43QJxwQzK0CtAqB36E1IDXye8nVB0PhJ9E2KhvYC6
M/HSKuGC/QTlx+6lT7yTfFcCkLYkEf0Mza5jf6EekN8qtKfml+PLAvQpm/BWRaz6
BqI9wqoq6m6oaveZyYemwliQxsLpzERjzRpmzSLE7aKSOFavaD/81fwZ1VK3Tnpo
8BaGySg3/Rokkd1HK79WrtHiZjE/3lcsjUaL0IDPPWfO6wul2Wz5sg==
=gHte
-----END PGP SIGNATURE-----