If I recall correctly, the final release of the 5.0 macppc ISO
image is still not bootable,
At least it's bootable on my Apus2000 (with OF 2.0), though
I don't know if anyone has tried it on OF 3.x machines.
---
Open Firmware, 2.0
To continue booting the MacOS type:
BYE<return>
To continue booting from the default boot device type:
BOOT<return>
ok
0 > boot scsi/sd@3:0
OF_open bootpath=
read stage 2 blocks: 0. done!
starting stage 2...
DEFAULT CATCH!, code=FFF00C00 at %SRR0: 00E0000C %SRR1: 00003070
ok
0 > reset-all
Open Firmware, 2.0
To continue booting the MacOS type:
BYE<return>
To continue booting from the default boot device type:
BOOT<return>
ok
0 > boot scsi/sd@3:0
OF_open bootpath=scsi/sd@3
read stage 2 blocks: 0. done!
starting stage 2...
NetBSD/macppc OpenFirmware Boot, Revision 1.11
(builds%b4.netbsd.org@localhost, Sun Apr 26 21:43:30 UTC 2009)
open /netbsd: Device not configured
open /netbsd.gz: Device not configured
4860668+242868=0x4de304
start=0x100000
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
2005,
2006, 2007, 2008
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 5.0 (INSTALL) #0: Sun Apr 26 23:04:20 UTC 2009
builds%b4.netbsd.org@localhost:/home/builds/ab/netbsd-5-0-RELEASE/macppc/
200904260229Z-obj/home/builds/ab/netbsd-5-0-RELEASE/src/sys/arch/
macppc/compile/INSTALL
total memory = 65536 KB
avail memory = 57492 KB
found ohare PIC at f3000000
bootpath: scsi/sd@3/netbsd.macppc
mainbus0 (root)
cpu0 at mainbus0: 603ev (Revision 2.1), ID 0 (primary)
cpu0: HID0 90c001<DOZE,DPM,ICE,DCE,NOPTI>, powersave: 1
cpu0: ohare L2 cache enabled
bandit0 at mainbus0
pci0 at bandit0 bus 0
pchb0 at pci0 dev 11 function 0
pchb0: vendor 0x106b product 0x0008 (rev. 0x02)
fxp0 at pci0 dev 14 function 0: i82550 Ethernet, rev 12
fxp0: interrupting at irq 25
fxp0: Ethernet address 00:07:e9:0b:d1:52
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
obio0 at pci0 dev 16 function 0: addr 0xf3000000
mesh0 at obio0 offset 0x10000 irq 12: 50MHz, SCSI ID 7
scsibus0 at mesh0: 8 targets, 8 luns per target
zsc0 at obio0 irq 15,16
zstty0 at zsc0 channel 0 (console i/o)
zstty1 at zsc0 channel 1
awacs at obio0 offset 0x14000 not configured
swim3 at obio0 offset 0x15000 not configured
nvram0 at obio0 offset 0x60000
cuda0 at obio0 offset 0x16000 irq 18
nadb0 at cuda0: Apple Desktop Bus
iic at cuda0 not configured
wdc0 at obio0 offset 0x20000 irq property not found; using 13: DMA
transfer
atabus0 at wdc0 channel 0
biomask 800007e netmask 800007e ttymask 800007e
scsibus0: waiting 2 seconds for devices to settle...
adbkbd0 at nadb0 addr 2: extended keyboard
wskbd0 at adbkbd0 mux 1
cd0 at scsibus0 target 3 lun 0: <MATSHITA, CD-ROM CR-506, 8S05>
cdrom removable
wd0 at atabus0 drive 0: <ST320011A>
wd0: 19092 MB, 38792 cyl, 16 head, 63 sec, 512 bytes/sect x 39102336
sectors
Kernelized RAIDframe activated
boot device: cd0
root on md0a dumps on md0b
root file system type: ffs
WARNING: clock lost 12 days
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
erase ^H, werase ^W, kill ^U, intr ^C, status ^T
Terminal type? [vt100]
Erase is backspace.
(I)nstall, (S)hell or (H)alt ? s
#
---
Izumi Tsutsui