Port-macppc archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
dual CPU system hangs
Hi,
I have a dual CPU PowerMac, and when building the tree with -j 3 the
system hangs after some time (1 or 2 hours).
It looks like it cannot create new processes. When I try to run a
program on an already open shell, it simply hangs,
^C doesn't get me back to the prompt.
Is there a way to enter DDB with an USB keyboard? In the FAQ I only
found a way with an ADB keyboard (Command-Option-Power)?
Or how can I try to debug this?
Another thing, I get many warnings on the console, like
gem0: discarding oversize frame (len=21845)
gem0: discarding oversize frame (len=7132)
gem0: receive error: CRC error
gem0: receive error: CRC error
gem0: receive error: CRC error
gem0: discarding oversize frame (len=21845)
gem0: discarding oversize frame (len=7132)
It seems to be the same as PR31858. Is there any progress on that?
I'm running -current from three days ago.
regards,
chris
# TWINPPC, derived from GENERIC, v1.303
include "arch/macppc/conf/std.macppc"
#options INCLUDE_CONFIG_FILE # embed config file in kernel binary
#ident "GENERIC-$Revision: 1.5 $"
maxusers 32
options ALTIVEC # Include AltiVec support
# Standard system options
options INSECURE # disable kernel security levels
options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
options NTP # NTP phase/frequency locked loop
options KTRACE # system call tracing via ktrace(1)
options SYSVMSG # System V message queues
options SYSVSEM # System V semaphores
options SYSVSHM # System V shared memory
options MODULAR # new style module(7) framework
options USERCONF # userconf(4) support
#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
# Enable experimental buffer queue strategy for better responsiveness under
# high disk I/O load. Use it with caution - it's not proven to be stable yet.
#options BUFQ_READPRIO
#options BUFQ_PRIOCSCAN
# Diagnostic/debugging support options
#options DIAGNOSTIC # cheap kernel consistency checks
#options DEBUG # expensive debugging checks/support
#options ZS_CONSOLE_ABORT# allow break to get into DDB on serial
options DDB # in-kernel debugger
options DDB_ONPANIC=1 # don't go into ddb on panic.
options DDB_HISTORY_SIZE=512 # enable history editing in DDB
#options TRAP_PANICWAIT
options DDB_COMMANDONENTER="bt"
#makeoptions DEBUG="-g" # compile full symbol table
# Compatibility options
#options COMPAT_09 # NetBSD 0.9,
#options COMPAT_10 # NetBSD 1.0,
#options COMPAT_11 # NetBSD 1.1,
#options COMPAT_12 # NetBSD 1.2,
options COMPAT_13 # NetBSD 1.3,
options COMPAT_14 # NetBSD 1.4,
options COMPAT_15 # NetBSD 1.5,
options COMPAT_16 # NetBSD 1.6,
options COMPAT_20 # NetBSD 2.0,
options COMPAT_30 # NetBSD 3.0,
options COMPAT_40 # NetBSD 4.0 compatibility.
options COMPAT_50 # NetBSD 5.0 compatibility.
options COMPAT_43 # and 4.3BSD
#options COMPAT_386BSD_MBRPART # recognize old partition ID
options COMPAT_LINUX # Linux binary compatibility
#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
options COMPAT_BSDPTY # /dev/[pt]ty?? ptys.
# Wedge support
#options DKWEDGE_AUTODISCOVER # Automatically add dk(4) instances
#options DKWEDGE_METHOD_GPT # Supports GPT partitions as wedges
# The following two options can break /etc/fstab, so handle with care
#options DKWEDGE_METHOD_BSDLABEL # Support disklabel entries as wedges
#options DKWEDGE_METHOD_MBR # Support MBR partitions as wedges
# File systems
file-system FFS # UFS
file-system EXT2FS # second extended file system (linux)
#file-system LFS # log-structured file system
#file-system MFS # memory file system
file-system NFS # Network File System client
file-system CD9660 # ISO 9660 + Rock Ridge file system
file-system MSDOSFS # MS-DOS file system
file-system FDESC # /dev/fd
file-system KERNFS # /kern
file-system NULLFS # loopback file system
#file-system OVERLAY # overlay file system
#file-system PUFFS # Userspace file systems (e.g. ntfs-3g & sshfs)
file-system PROCFS # /proc
#file-system UMAPFS # NULLFS + uid and gid remapping
#file-system UNION # union file system
#file-system SMBFS # CIFS; also needs nsmb (below)
file-system PTYFS # /dev/pts/N support
#file-system TMPFS # Efficient memory file-system
#file-system UDF # experimental - OSTA UDF CD/DVD file-system
file-system HFS # experimental - Apple HFS+ (read-only)
# File system options
#options QUOTA # legacy UFS quotas
#options QUOTA2 # new, in-filesystem UFS quotas
#options FFS_EI # FFS Endian Independent support
options WAPBL # File system journaling support
#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental
#options NFSSERVER # Network File System server
#options FFS_NO_SNAPSHOT # No FFS snapshot support
#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
# immutable) behave as system flags.
options APPLE_UFS # Apple UFS support in FFS
#options NFS_BOOT_DHCP # Support DHCP NFS root
# Networking options
#options GATEWAY # packet forwarding
options INET # IP + ICMP + TCP + UDP
options INET6 # IPV6
#options IPSEC # IP security
#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
#options IPSEC_NAT_T # IPsec NAT traversal (NAT-T)
#options IPSEC_DEBUG # debug for IP security
#options MROUTING # IP multicast routing
#options PIM # Protocol Independent Multicast
#options ISO,TPIP # OSI
#options EON # OSI tunneling over IP
#options NETATALK # AppleTalk networking protocols
options PPP_BSDCOMP # BSD-Compress compression support for PPP
options PPP_DEFLATE # Deflate compression support for PPP
options PPP_FILTER # Active filter support for PPP (requires bpf)
options PFIL_HOOKS # pfil(9) packet filter hooks
#options IPFILTER_LOG # ipmon(8) log support
#options IPFILTER_LOOKUP # ippool(8) support
#options IPFILTER_COMPAT # Compat for IP-Filter
#options IPFILTER_DEFAULT_BLOCK # block all packets by default
#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
#options ALTQ # Manipulate network interfaces' output queues
#options ALTQ_BLUE # Stochastic Fair Blue
#options ALTQ_CBQ # Class-Based Queueing
#options ALTQ_CDNR # Diffserv Traffic Conditioner
#options ALTQ_FIFOQ # First-In First-Out Queue
#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box)
#options ALTQ_HFSC # Hierarchical Fair Service Curve
#options ALTQ_LOCALQ # Local queueing discipline
#options ALTQ_PRIQ # Priority Queueing
#options ALTQ_RED # Random Early Detection
#options ALTQ_RIO # RED with IN/OUT
#options ALTQ_WFQ # Weighted Fair Queueing
# These options enable verbose messages for several subsystems.
# Warning, these may compile large string tables into the kernel!
options PCIVERBOSE # verbose PCI device autoconfig messages
options MIIVERBOSE # verbose PHY autoconfig messages
#options PCI_CONFIG_DUMP # verbosely dump PCI config space
options SCSIVERBOSE # human readable SCSI error messages
options USBVERBOSE # verbose USB device autoconfig messages
# wscons options
#options WSEMUL_SUN # sun terminal emulation
options WSEMUL_VT100 # VT100 / VT220 emulation
options WSDISPLAY_COMPAT_USL # wsconscfg VT handling
#options WS_DEFAULT_FG=WSCOL_BLACK
#options WS_DEFAULT_BG=WSCOL_LIGHT_WHITE
#options WS_KERNEL_FG=WSCOL_GREEN
#options WS_KERNEL_BG=WSCOL_LIGHT_WHITE
options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes
options FONT_GALLANT12x22
options FONT_QVSS8x15 # a smaller font for lower resolutions
# Optional Mac keyboard tweaks
# Tweak the keyboard driver to treat the caps lock key on an ADB
# keyboard as a control key; requires special remapping because of
# ADB's strange emulation of a mechanically-locked key.
#options CAPS_IS_CONTROL
# On Mac laptops, several function keys double as "hot keys"
# (brightness, volume, eject) when the Fn modifier is held down. Mac
# OS X likes to reprogram the keyboard controller to send hot key
# events when Fn is not held down and send function key events when it
# is. This option transforms the non-keyboard "button" events back
# into function key events.
# enabled by default since trying to control brightness with those causes
# trouble on pretty much all halfway recent Apple laptops
options FORCE_FUNCTION_KEYS
# Kernel root file system and dump configuration.
config netbsd root on wd0k type ? dumps on wd2d
#
# Device configuration
#
mainbus* at root
cpu* at mainbus?
#bandit* at mainbus?
#grackle* at mainbus?
uninorth* at mainbus?
uni_n* at mainbus?
memory* at mainbus?
spdmem* at memory? addr ?
#pci* at bandit? bus ?
#pci* at grackle? bus ?
pci* at uninorth? bus ?
#pci* at ppb? bus ?
pchb* at pci? dev ? function ? # PCI-Host bridges
#ppb* at pci? dev ? function ? # PCI-PCI bridges
# XXX 'puc's aren't really bridges, but there's no better place for them here
#puc* at pci? dev ? function ? # PCI "universal" comm. cards
#lpt* at puc? port ? # || ports on > "universal" comm boards
# PCI Network devices
#an* at pci? dev ? function ? # Aironet PC4500/PC4800 (802.11)
#ath* at pci? dev ? function ? # Atheros 5210/5211/5212 802.11
#atw* at pci? dev ? function ? # ADMtek ADM8211 (802.11)
#bge* at pci? dev ? function ? # Broadcom 570x Gigabit Ethernet
#bwi* at pci? dev ? function ? # Broadcom / Apple Airport Extreme
#ep* at pci? dev ? function ? # 3Com 3c59x
#epic* at pci? dev ? function ? # SMC EPIC/100 Ethernet
#ex* at pci? dev ? function ? # 3Com 90x[BC]
#fpa* at pci? dev ? function ? # DEC PCI FDDI (DEFPA) Controller
#fxp* at pci? dev ? function ? # Intel EtherExpress PRO 10+/100B
gem* at pci? dev ? function ? # gmac ethernet
#gm* at pci? dev ? function ? # gmac ethernet (old)
#gsip* at pci? dev ? function ? # NS83820 Gigabit Ethernet
#le* at pci? dev ? function ? # PCnet-PCI Ethernet
#lmc* at pci? dev ? function ? # Lan Media Corp SSI/HSSI/DS3
#mtd* at pci? dev ? function ? # Myson MTD803 3-in-1 Ethernet
#ne* at pci? dev ? function ? # NE2000-compatible Ethernet
#pcn* at pci? dev ? function ? # AMD PCnet-PCI Ethernet
#ral* at pci? dev ? function ? # Ralink Technology RT25x0 802.11a/b/g
#re* at pci? dev ? function ? # Realtek 8139C+/8169/8169S/8110S
#rtk* at pci? dev ? function ? # Realtek 8129/8139
#sf* at pci? dev ? function ? # Adaptec AIC-6915 Ethernet
#sip* at pci? dev ? function ? # SiS 900/7016 Ethernet
#skc* at pci? dev ? function ? # SysKonnect SK9821 Gigabit Ethernet
#sk* at skc? # SysKonnect SK9821 Gigabit Ethernet
#ste* at pci? dev ? function ? # Sundance ST-201 Ethernet
#stge* at pci? dev ? function ? # Sundance/Tamarack TC9021 Gigabit
#ti* at pci? dev ? function ? # Alteon ACEnic gigabit Ethernet
#tl* at pci? dev ? function ? # ThunderLAN-based Ethernet
#tlp* at pci? dev ? function ? # DECchip 21x4x and clones
#vge* at pci? dev ? function ? # VIA VT612x Gigabit Ethernet
#vr* at pci? dev ? function ? # VIA Rhine Fast Ethernet
#wi* at pci? dev ? function ? # Intersil Prism Mini-PCI (802.11b)
#wm* at pci? dev ? function ? # Intel 82543/82544 gigabit
# PCI SCSI controllers
#adv* at pci? dev ? function ? # AdvanSys 1200[A,B], 9xx[U,UA] SCSI
#adw* at pci? dev ? function ? # AdvanSys 9x0UW[D], 3940U[2,3]W SCSI
#ahc* at pci? dev ? function ? # Adaptec 294x, aic78x0 SCSI
#bha* at pci? dev ? function ? # BusLogic 9xx SCSI
#esiop* at pci? dev ? function ? # NCR 53c8xx SCSI (enhanced)
#iha* at pci? dev ? function ? # Initio INIC-940/950 SCSI
#isp* at pci? dev ? function ? # Qlogic ISP 10x0/2xx0 SCSI/Fibre Chan
#mpt* at pci? dev ? function ? # LSILogic 9x9 and 53c1030
#pcscp* at pci? dev ? function ? # AMD Am53c974 PCscsi-PCI SCSI
#siop* at pci? dev ? function ? # NCR 53c8xx SCSI
#trm* at pci? dev ? function ? # Tekram DC-395U/UW/F, DC-315/U SCSI
# Display devices
#ofb* at pci? dev ? function ? # Generic Open Firmware Framebuffer
# OFB_ENABLE_CACHE speeds up the console on many machines, but should
# not be enabled on some older machines, such as the rev. A-D iMacs or any
# O'Hare based machine that uses external cache like the PowerBook 3400c
#options OFB_ENABLE_CACHE # Speed up console in ofb
#options OFB_FAKE_VGA_FB # Allow X to mmap VGA regs
#
# ofb is considered obsolete and machine-independent genfb should be used
# instead.
#chipsfb* at pci? function ? # C&T 65550
#machfb* at pci? function ? # ATI Mach 64, Rage, Rage Pro
radeonfb* at pci? function ? # ATI Radeon. R3xx is problematic
options RADEONFB_MMAP_BARS # allow mmap()ing BARs - needed for X
#voodoofb* at pci? function ? # 3Dfx Voodoo3
#tdvfb* at pci? function ? # 3Dfx Voodoo2
#r128fb* at pci? function ? # ATI Rage 128
genfb* at pci? function ?
# make sure the console display is always wsdisplay0
wsdisplay0 at wsemuldisplaydev? console 1
wsdisplay* at wsemuldisplaydev?
#macofcons0 at pci? dev ? function ? # OpenFirmware console (for debugging)
# Other PCI devices
#pciide* at pci? dev ? function ? flags 0x0000 # GENERIC pciide driver
#acardide* at pci? dev ? function ? # Acard IDE controllers
#aceride* at pci? dev ? function ? # Acer Lab IDE controllers
#ahcisata* at pci? dev ? function ? # AHCI SATA controllers
#artsata* at pci? dev ? function ? # Intel i31244 SATA controller
#cmdide* at pci? dev ? function ? # CMD tech IDE controllers
#cypide* at pci? dev ? function ? # Cypress IDE controllers
#hptide* at pci? dev ? function ? # Triones/HighPoint IDE controllers
#iteide* at pci? dev ? function ? # IT Express IDE controllers
#optiide* at pci? dev ? function ? # Opti IDE controllers
#pdcide* at pci? dev ? function ? # Promise IDE controllers
#pdcsata* at pci? dev ? function ? # Promise SATA150 controllers
#satalink* at pci? dev ? function ? # SiI SATALink controllers
#siside* at pci? dev ? function ? # SiS IDE controllers
#slide* at pci? dev ? function ? # Symphony Labs IDE controllers
#stpcide* at pci? dev ? function ? # STMicro STPC IDE controllers
#viaide* at pci? dev ? function ? # VIA/AMD/Nvidia IDE controllers
wdc* at pci? dev ? function ? # Kauai ATA
cbb* at pci? dev ? function ? # PCI-CardBus bridge
obio* at pci? dev ? function ?
#acphy* at mii? phy ? # DAltima AC101 and AMD Am79c874 PHYs
#amhphy* at mii? phy ? # AMD 79c901 Ethernet PHYs
#bmtphy* at mii? phy ? # Broadcom BCM5201/BCM5202 PHYs
brgphy* at mii? phy ? # Broadcom BCM5400 PHYs
#ciphy* at mii? phy ? # Cicada CS8201 Gig-E PHYs
#dmphy* at mii? phy ? # Davicom DM9101 PHYs
#exphy* at mii? phy ? # 3Com internal PHYs
#glxtphy* at mii? phy ? # Level One LXT-1000 PHYs
#gphyter* at mii? phy ? # NS83861 Gig-E PHY
#icsphy* at mii? phy ? # Integrated Circuit Systems
ICS189x
#ikphy* at mii? phy ? # Intel 82563 PHYs
#inphy* at mii? phy ? # Intel 82555 PHYs
#iophy* at mii? phy ? # Intel 82553 PHYs
#lxtphy* at mii? phy ? # Level One LXT-970 PHYs
#makphy* at mii? phy ? # Marvell Semiconductor 88E1000 PHYs
#nsphy* at mii? phy ? # NS83840 PHYs
#nsphyter* at mii? phy ? # NS83843 PHYs
#pnaphy* at mii? phy ? # generic HomePNA PHYs
#qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs
#rgephy* at mii? phy ? # Realtek 8169S/8110S internal PHYs
#rlphy* at mii? phy ? # Realtek 8139/8201L PHYs
#sqphy* at mii? phy ? # Seeq 80220/80221/80223 PHYs
#tlphy* at mii? phy ? # ThunderLAN PHYs
#tqphy* at mii? phy ? # TDK Semiconductor PHYs
#ukphy* at mii? phy ? # generic unknown PHYs
#urlphy* at mii? phy ? # Realtek RTL8150L internal PHYs
# PCI serial interfaces
#com* at puc? port ? # 16x50s on "universal" comm boards
#cy* at pci? dev ? function ? # Cyclades Cyclom-Y serial boards
#cz* at pci? dev ? function ? # Cyclades-Z multi-port serial boards
#bktr* at pci? dev ? function ? # Brooktree video/audio
capture/tuner
#radio* at bktr?
#bm* at obio? # bmac ethernet
#mc* at obio? # MACE ethernet
#esp* at obio? flags 0x00ff # 53c9x SCSI
#mesh* at obio? flags 0xffff # MESH SCSI
nvram* at obio? # nvram
# the traditional ADB subsystem
#adb* at obio? # Apple Desktop Bus
#apm0 at adb? # APM emulation
#aed* at adb? # ADB Event Device
#akbd* at adb? # ADB keyboard
#ams* at adb? # ADB mouse
#abtn* at adb?
# the new, improved ADB subsystem
#cuda* at obio? # CUDA, for Old World PowerMacs
pmu* at obio? # PMU, *Books and newer PowerMacs
nadb* at adb_bus? # ADB bus enumerator, at cuda or pmu
#adbkbd* at nadb? # ADB keyboard
#adbms* at nadb? # ADB mice and touchpads
adbbt* at nadb? # button device found on *Books
wskbd* at wskbddev? console ?
wsmouse* at wsmousedev?
#battery* at pmu? # legacy battery, for ohare-based PowerBooks
smartbat* at pmu? # Smart battery, found in newer *Books
#iic0 at cuda0 # CUDA's IIC bus
#sgsmix0 at iic0 addr 0x8a # additional mixer found in beige G3
# use with awacs
zsc* at obio?
zstty* at zsc? channel ?
#mediabay* at obio?
#wdc* at mediabay? flags 0
# awacs is disabled because on most systems (7300 - 9600 PowerMacs,
# many kinds of G4s), very heavy load can cause the machine to lock
# up. ONLY enable this if your machine is never under heavy load, or
# you'd rather have audio than worry about occasional lockups.
#awacs* at obio? # Apple audio device
ki2c* at obio? # Keywest I2C
ki2c* at uni_n? # Keywest I2C
iic* at ki2c?
dbcool* at ki2c? # dbCool thermal monitor & fan control
deq* at ki2c? # mixer/equalizer, needed by snapper
#wi* at obio? # AirMac
snapper* at obio? # Snapper audio device
cardslot* at cbb?
cardbus* at cardslot?
pcmcia* at cardslot?
#com* at pcmcia? function ? # Modems and serial cards
#wdc* at pcmcia? function ? # PCMCIA IDE controllers
#ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet
#mbe* at pcmcia? function ? # MB8696x based Ethernet
#ne* at pcmcia? function ? # NE2000-compatible Ethernet
#awi* at pcmcia? function ? # BayStack 650/660 (802.11FH/DS)
#wi* at pcmcia? function ? # Lucent WaveLan IEEE (802.11)
#ath* at cardbus? function ? # Atheros 5210/5211/5212 802.11
#atw* at cardbus? function ? # ADMtek ADM8211 (802.11)
#ex* at cardbus? function ? # 3Com 3C575TX
#tlp* at cardbus? function ? # DECchip 21143
#ral* at cardbus? function ? # Ralink Technology RT25x0 802.11a/b/g
#rtk* at cardbus? function ? # Realtek 8129/8139
#rtw* at cardbus? function ? # Realtek 8180L (802.11)
# Cryptographic Devices
# PCI cryptographic devices
# (disabled, requires opencrypto framework which requires generic softints
#hifn* at pci? dev ? function ? # Hifn 7755/7811/795x
#ubsec* at pci? dev ? function ? # Broadcom 5501/5601/580x/582x
#scsibus* at scsi?
#sd* at scsibus? target ? lun ? # SCSI disks
#st* at scsibus? target ? lun ? # SCSI tape drives
#cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
#ch* at scsibus? target ? lun ? # SCSI autochangers
#ss* at scsibus? target ? lun ? # SCSI scanners
#uk* at scsibus? target ? lun ? # SCSI unknown
wdc* at obio? flags 0x1
atabus* at ata?
wd* at atabus? drive ? flags 0x0000
atapibus* at atapi?
cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives
#sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives
#uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown
# PCI USB controllers
ohci* at pci? dev ? function ? # USB Open Host Controller
ehci* at pci? dev ? function ? # USB Enhanced Host Controller
#ohci* at cardbus? function ? # USB Open Host Controller
#ehci* at cardbus? function ? # USB Enhanced Host Controller
#slhci* at pcmcia? function ? # ScanLogic SL811HS
usb* at ehci? # USB bus support
usb* at ohci? # USB bus support
#usb* at slhci? # USB bus support
uhub* at usb? # USB Hubs
uhub* at uhub? port ?
uhidev* at uhub? port ? configuration ? interface ? # USB HID device
#pbms* at uhidev? reportid ? # PowerBook 15" mouse
ums* at uhidev? reportid ? # USB Mice
ukbd* at uhidev? reportid ? # USB Keyboards
#uthum* at uhidev? reportid ? # TEMPerHUM sensors
#ucycom* at uhidev? reportid ? # USB serial
adapter
uhid* at uhidev? reportid ? # USB Generic HID
#ulpt* at uhub? port ? configuration ? interface ? # USB Printer
#umodem* at uhub? port ? configuration ? # USB Modem
#ucom* at umodem?
#ubsa* at uhub? port ? # Belkin serial adapter
#ucom* at ubsa? portno ?
uplcom* at uhub? port ? # Prolific serial
ucom* at uplcom? portno ?
#uftdi* at uhub? port ? # FTDI serial
#ucom* at uftdi? portno ?
#uhso* at uhub? port ? configuration ? # Option N.V. Wireless
WAN modems
#umass* at uhub? port ? configuration ? interface ? # USB Mass Storage
#uaudio* at uhub? port ? configuration ? # USB audio
# D-Link DSB-R100 USB FM radio tuner
#udsbr* at uhub? port ?
#radio* at udsbr?
# USB Ethernet adapters
#aue* at uhub? port ? # ADMtek AN986 Pegasus based adapters
#axe* at uhub? port ? # ASIX AX88172 based adapters
#cue* at uhub? port ? # CATC USB-EL1201A based adapters
#kue* at uhub? port ? # Kawasaki LSI KL5KUSB101B based adapters
#url* at uhub? port ? # Realtek RTL8150L based adapters
#udav* at uhub? port ? # Davicom DM9601 based adapters
#ukyopon* at uhub? port ? # Kyocera AIR-EDGE PHONE
#ucom* at ukyopon? portno ?
uscanner* at uhub? port ? # USB scanners
#uyap* at uhub? port ? # Y@P firmware loader
ugen* at uhub? port ? configuration ? interface ? # USB Generic driver
# USB 802.11 adapters
#atu* at uhub? port ? # Atmel at76c50x 802.11b
#otus* at uhub? port ? # Atheros AR9001U
#ural* at uhub? port ? # Ralink Technology RT2500USB 802.11a/b/g
#rum* at uhub? port ? # Ralink Technology RT2501/RT2601 802.11a/b/g
#zyd* at uhub? port ? # Zydas ZD1211
# PCI IEEE1394 controllers
#fwohci* at pci? dev ? function ? # IEEE1394 Open Host Controller
# CardBus IEEE1394 controllers
#fwohci* at cardbus? function ? # IEEE1394 Open Host Controller
#ieee1394if* at fwohci?
#fwip* at ieee1394if? # IP over IEEE1394
#sbp* at ieee1394if? euihi ? euilo ?
# Audio Devices
# PCI audio devices
#clcs* at pci? dev ? function ? # Cirrus Logic CS4280
#cmpci* at pci? dev ? function ? # C-Media CMI8338/8738
#eap* at pci? dev ? function ? # Ensoniq AudioPCI
#eso* at pci? dev ? function ? # ESS Solo-1 PCI AudioDrive
#fms* at pci? dev ? function ? # Forte Media FM801
#sv* at pci? dev ? function ? # S3 SonicVibes
# OPL[23] FM synthesizers
#opl* at cmpci? flags 1
#opl* at eso?
#opl* at fms?
# Audio support
audio* at audiobus?
# MPU 401 UARTs
#mpu* at cmpci?
#mpu* at eso?
#mpu* at fms?
# MIDI support
#midi* at eap? # 137[01] MIDI port
#midi* at mpu? # MPU 401
#
# accept filters
#pseudo-device accf_data # "dataready" accept filter
#pseudo-device accf_http # "httpready" accept filter
#pseudo-device crypto # /dev/crypto device
# (disabled, requires generic softints)
#pseudo-device swcrypto # software crypto implementation
pseudo-device vnd # disk-like interface to files
#options VND_COMPRESSION # compressed vnd(4)
#pseudo-device ccd 4 # concatenated/striped disk devices
#pseudo-device cgd 4 # cryptographic disk devices
#pseudo-device raid 8 # RAIDframe disk driver
#options RAID_AUTOCONFIG # auto-configuration of RAID components
# Options to enable various other RAIDframe RAID types.
# options RF_INCLUDE_EVENODD=1
# options RF_INCLUDE_RAID5_RS=1
# options RF_INCLUDE_PARITYLOGGING=1
# options RF_INCLUDE_CHAINDECLUSTER=1
# options RF_INCLUDE_INTERDECLUSTER=1
# options RF_INCLUDE_PARITY_DECLUSTERING=1
# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1
pseudo-device fss # file system snapshot device
pseudo-device md # memory disk device
pseudo-device loop # network loopback
pseudo-device bpfilter # packet filter
pseudo-device ipfilter # IP filter (firewall) and NAT
#pseudo-device ppp # Point-to-Point Protocol
#pseudo-device pppoe # PPP over Ethernet (RFC 2516)
pseudo-device sl # Serial Line IP
pseudo-device tun # network tunneling over tty
#pseudo-device tap # virtual Ethernet
##pseudo-device gre # generic L3 over IP tunnel
#pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933)
#pseudo-device faith # IPv[46] tcp relay translation i/f
#pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation
#pseudo-device vlan # IEEE 802.1q encapsulation
#pseudo-device bridge # simple inter-network bridging
#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too
#pseudo-device agr # IEEE 802.3ad link aggregation
pseudo-device pty # pseudo-terminals
pseudo-device openfirm # /dev/openfirm
pseudo-device wsmux # mouse and keyboard multiplexer
pseudo-device swwdog # software watchdog driver - swwdog(4)
#pseudo-device clockctl # user control of clock subsystem
pseudo-device ksyms # /dev/ksyms
#pseudo-device nsmb # SMB requester
#pseudo-device pf # PF packet filter
#pseudo-device pflog # PF log if
pseudo-device putter # for puffs and pud
# userland interface to drivers, including autoconf and properties retrieval
pseudo-device drvctl
# Veriexec
#
# a pseudo device needed for veriexec
#pseudo-device veriexec 1
#
# Uncomment the fingerprint methods below that are desired. Note that
# removing fingerprint methods will have almost no impact on the kernel
# code size.
#
#options VERIFIED_EXEC_FP_RMD160
#options VERIFIED_EXEC_FP_SHA256
#options VERIFIED_EXEC_FP_SHA384
#options VERIFIED_EXEC_FP_SHA512
#options VERIFIED_EXEC_FP_SHA1
#options VERIFIED_EXEC_FP_MD5
#options PAX_MPROTECT=0 # PaX mprotect(2) restrictions
# $NetBSD: GENERIC.MP,v 1.4 2010/07/31 12:24:50 macallan Exp $
#
# GENERIC kernel, plus multiprocessor support.
include "arch/macppc/conf/TWINPPC"
options MULTIPROCESSOR
options IPI_HAMMERHEAD
options IPI_OPENPIC
# this option may cause trouble under very high interrupt load
#options OPENPIC_DISTRIBUTE # let all CPUs serve interrupts
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 6.99.23 (TWINPPC.MP) #0: Tue Jul 16 07:23:55 CEST 2013
chris@muc-twinppc:/local/netbsd-src/obj/sys/arch/macppc/compile/TWINPPC.MP
total memory = 1280 MB
oea_startup: failed to allocate DEAD ZONE: error=12
avail memory = 1229 MB
timecounter: Timecounters tick every 10.000 msec
found openpic PIC at 80040000
OpenPIC Version 1.2: Supports 4 CPUs and 64 interrupt sources.
bootpath: /pci@f4000000/ethernet:0/netbsd
mainbus0 (root)
cpu0 at mainbus0: 7455 (Revision 3.3), ID 0 (primary)
cpu0: HID0
0x84d0c1bc<EMCP,TBEN,HIGH_BAT_EN,NAP,DPM,ICE,DCE,XBSEN,SGE,BTIC,LRSTK,FOLD,BHT>,
powersave: 1
cpu0: 1250.00 MHz, 256KB L2 cache no parity parity enabled, 1MB no-parity L3
cache (DDR SRAM) at 5:1 ratio
cpu1 at mainbus0: 7455 (Revision 3.3), ID 1
cpu1: HID0
0x84d0c1bc<EMCP,TBEN,HIGH_BAT_EN,NAP,DPM,ICE,DCE,XBSEN,SGE,BTIC,LRSTK,FOLD,BHT>,
powersave: 1
cpu1: 1250.00 MHz, 256KB L2 cache no parity parity enabled, 1MB no-parity L3
cache (DDR SRAM) at 5:1 ratio
memory0 at mainbus0: len=512
spdmem0 at memory0
spdmem0: DDR SDRAM, no parity or ECC, 256MB, 333MHz (PC-2700)
spdmem0: 13 rows, 10 cols, 1 ranks, 4 banks/chip, 6.0ns cycle time
spdmem0: tAA-tRCD-tRP-tRAS: 1-3-3-7
spdmem0: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing)
spdmem1 at memory0
spdmem1: DDR SDRAM, no parity or ECC, 512MB, 333MHz (PC-2700)
spdmem1: 13 rows, 10 cols, 2 ranks, 4 banks/chip, 6.0ns cycle time
spdmem1: tAA-tRCD-tRP-tRAS: 1-3-3-7
spdmem1: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing)
spdmem2 at memory0
spdmem2: DDR SDRAM, data ECC, 256MB, 333MHz (PC-2700)
spdmem2: 13 rows, 10 cols, 1 ranks, 4 banks/chip, 6.0ns cycle time
spdmem2: tAA-tRCD-tRP-tRAS: 1-3-3-7
spdmem2: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing)
spdmem3 at memory0
spdmem3: DDR SDRAM, data ECC, 256MB, 333MHz (PC-2700)
spdmem3: 13 rows, 10 cols, 1 ranks, 4 banks/chip, 6.0ns cycle time
spdmem3: tAA-tRCD-tRP-tRAS: 1-3-3-7
spdmem3: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing)
uni_n0 at mainbus0 address 0xf8000000
ki2c0 at uni_n0 address 0xf8001000
iic0 at ki2c0: I2C bus
dbcool0 at ki2c0
dbcool0: ADM1030 dBCool(tm) Controller (rev 0x0083)
i2c-hwclock at ki2c0 address 0xca not configured
temp-monitor at ki2c0 address 0x92 not configured
cereal at ki2c0 address 0x1c0 not configured
uninorth0 at mainbus0
pci0 at uninorth0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: Apple Computer UniNorth AGP Bridge (rev. 0x00)
radeonfb0 at pci0 dev 16 function 0: ATI Technologies Radeon 9000/PRO If (rev.
0x01)
radeonfb0: Video BIOS not present
radeonfb0: No video BIOS, using default clocks
radeonfb0: refclk = 27.000 MHz, refdiv = 12 minpll = 125000, maxpll = 400000
radeonfb0: 64 MB aperture at 0x98000000, 64 KB registers at 0x90000000
radeonfb0: display 0: initial virtual resolution 640x480 at 8 bpp
radeonfb0: port 0: physical 1024x768 60Hz
radeonfb0: port 1: physical 1024x768 60Hz
wsdisplay0 at radeonfb0 kbdmux 1: console (fb, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at radeonfb0 not configured
uninorth1 at mainbus0
pci1 at uninorth1 bus 0
pci1: i/o space, memory space enabled
pchb1 at pci1 dev 11 function 0
pchb1: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
ohci0 at pci1 dev 18 function 0: NEC USB Host Controller (rev. 0x41)
ohci0: interrupting at irq 52
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
ohci1 at pci1 dev 18 function 1: NEC USB Host Controller (rev. 0x41)
ohci1: interrupting at irq 52
ohci1: OHCI version 1.0
usb1 at ohci1: USB revision 1.0
ehci0 at pci1 dev 18 function 2: NEC USB2 Host Controller (rev. 0x02)
ehci0: interrupting at irq 52
ehci0: EHCI version 0.95
ehci0: companion controllers, 3 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
obio0 at pci1 dev 23 function 0: addr 0x80000000
obio0: enabling KeyLargo internal modem
zsc0 at obio0 irq 22,23
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
snapper0 at obio0 offset 0x10000: irq 30,1,2
pmu0 at obio0 offset 0x16000 irq 47: rev. 12
pmu0: initializing IIC bus
pmu0: initializing RTC
pmu0: power-mgt not configured
ki2c1 at obio0
iic1 at ki2c1: I2C bus
cereal at ki2c1 address 0x1c0 not configured
deq0 at ki2c1 Apple Digital Equalizer, addr 0x6a
wdc0 at obio0 offset 0x1f000 irq 19, level triggered: DMA transfer
atabus0 at wdc0 channel 0
wdc1 at obio0 offset 0x20000 irq 20, level triggered: DMA transfer
atabus1 at wdc1 channel 0
snapper0: codec: TAS3004
audio0 at snapper0: full duplex, playback, capture
ohci2 at pci1 dev 24 function 0: Apple Computer KeyLargo USB Controller (rev.
0x00)
pci_intr_map: no mapping for pin A
ohci2: couldn't map interrupt
ohci3 at pci1 dev 25 function 0: Apple Computer KeyLargo USB Controller (rev.
0x00)
pci_intr_map: no mapping for pin A
ohci3: couldn't map interrupt
ohci4 at pci1 dev 27 function 0: NEC USB Host Controller (rev. 0x43)
ohci4: interrupting at irq 63
ohci4: OHCI version 1.0
usb3 at ohci4: USB revision 1.0
ohci5 at pci1 dev 27 function 1: NEC USB Host Controller (rev. 0x43)
ohci5: interrupting at irq 63
ohci5: OHCI version 1.0
usb4 at ohci5: USB revision 1.0
uninorth2 at mainbus0
pci2 at uninorth2 bus 0
pci2: i/o space, memory space enabled
pchb2 at pci2 dev 11 function 0
pchb2: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
wdc2 at pci2 dev 13 function 0: interrupting at irq 39
atabus2 at wdc2 channel 0
Apple Computer UniNorth Firewire (Firewire serial bus, interface 0x10, revision
0x01) at pci2 dev 14 function 0 not configured
gem0 at pci2 dev 15 function 0: Apple Computer GMAC Ethernet (rev. 0x00)
gem0: interrupting at irq 41
brgphy0 at gem0 phy 0: BCM5421 1000BASE-T media interface, rev. 1
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
gem0: Ethernet address 00:0a:95:78:cd:da, 10KB RX fifo, 4KB TX fifo
vmmask 33980000 schedmask 7ff80000 highmask 7ff80000
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "mftb" frequency 41658586 Hz quality 100
cpu1 started
uhub0 at usb1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb2: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 5 ports with 5 removable, self powered
uhub2 at usb3: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 3 ports with 3 removable, self powered
uhub3 at usb4: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 3 ports with 3 removable, self powered
wd0 at atabus0 drive 0
wd0: <IBM-DTLA-307030>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 29314 MB, 59560 cyl, 16 head, 63 sec, 512 bytes/sect x 60036480 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd1 at atabus0 drive 1
wd1: <SAMSUNG SP1203N>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 111 GB, 232632 cyl, 16 head, 63 sec, 512 bytes/sect x 234493056 sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66) (using
DMA)
wd1(wdc0:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66) (using
DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <PIONEER DVD-RW DVR-105, CADL038059WL, A506> cdrom
removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(wdc1:0:0): using PIO mode 4, DMA mode 2 (using DMA)
wd2 at atabus2 drive 0
wd2: <SAMSUNG SP1203N>
wd2: drive supports 16-sector PIO transfers, LBA48 addressing
wd2: 111 GB, 232632 cyl, 16 head, 63 sec, 512 bytes/sect x 234493056 sectors
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd3 at atabus2 drive 1
wd3: <SAMSUNG SP0812N>
wd3: drive supports 16-sector PIO transfers, LBA48 addressing
wd3: 76351 MB, 155127 cyl, 16 head, 63 sec, 512 bytes/sect x 156368016 sectors
wd3: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd2(wdc2:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
(using DMA)
wd3(wdc2:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
(using DMA)
uhub5 at uhub2 port 1: Alps Electric Hub in Apple Extended USB Keyboard, class
9/0, rev 1.10/1.10, addr 2
uhub5: 3 ports with 2 removable, bus powered
uhidev0 at uhub5 port 1 configuration 1 interface 0
uhidev0: Alps Electric Apple Extended USB Keyboard, rev 1.10/1.11, addr 3,
iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub5 port 1 configuration 1 interface 1
uhidev1: Alps Electric Apple Extended USB Keyboard, rev 1.10/1.11, addr 3,
iclass 3/0
uhidev1: 3 report ids
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
swwdog0: software watchdog initialized
boot device: gem0
root on wd0k dumps on wd2d
root file system type: ffs
wsdisplay0: screen 1 added (fb, vt100 emulation)
wsdisplay0: screen 2 added (fb, vt100 emulation)
wsdisplay0: screen 3 added (fb, vt100 emulation)
wsdisplay0: screen 4 added (fb, vt100 emulation)
Home |
Main Index |
Thread Index |
Old Index