Subject: Ok, got further with 20000821 kernel
To: None <port-mipsco@netbsd.org>
From: Saku Setala <setala@elisa.fi>
List: port-mipsco
Date: 05/04/2001 00:35:51
    Monitor: Version 5.43 OPT Mon May 13 17:31:12 PDT 1991 root
Memory size: 67108864 (0x4000000) bytes, 64 MB
Icache size: 32768 (0x8000) bytes
Dcache size: 32768 (0x8000) bytes
>> boot dksd(,,0)/netbsd
210192+58672+230560 entry: 0xa0600000
Standalone Shell: Version 5.03 OPT Tue Apr 16 21:09:10 EDT 1991 root

Loading dksd(,,0)/netbsd
1173136+578931+146800 entry: 0x80021000
Copyright (c) 1996, 1997, 1998, 1999, 2000
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.5E (RC3230) #51: Mon Aug 21 22:10:25 NZST 2000
    wdk@grunt.zl2bkc.niwa.cri.nz:/home2/netbsd/src/sys/arch/mipsco/compile/RC3230
Mips 3230 Magnum (Pizazz)
total memory = 67108864
avail mem = 60268544
using 844 buffers containing 3457024 bytes of memory
mainbus0 (root)
cpu0 at mainbus0: MIPS R3000 CPU (0x230) Rev. 3.0 with MIPS R3010 FPC Rev. 4.0
cpu0: 32KB Instruction, 32KB Data, direct mapped cache
obio0 at mainbus0
le0 at obio0 addr 0xba000000: address 00:00:6b:81:5e:08
le0: 16 receive buffers, 4 transmit buffers
mkclock0 at obio0 addr 0xbd000000
rambo0 at obio0 addr 0xbc000000: parity enabled
fd0 at obio0 addr 0xbe000000: not fully implemented
zsc0 at obio0 addr 0xbb000000
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1 (console io)
asc0 at obio0 addr 0xb8000000: NCR53C94, 24MHz, SCSI ID 7
scsibus0 at asc0: 8 targets, 8 luns per target
scsibus0: waiting 2 seconds for devices to settle...
probe(asc0:0:0): max sync rate 4.80MB/s
sd0 at scsibus0 target 0 lun 0: <MAXTOR, LXT-200S, 4.18> SCSI1 0/direct fixed
sd0: 191 MB, 1314 cyl, 7 head, 42 sec, 512 bytes/sect x 392056 sectors
probe(asc0:1:0): max sync rate 4.80MB/s
sd1 at scsibus0 target 1 lun 0: <MAXTOR, LXT-200S, 4.18> SCSI1 0/direct fixed
sd1: 191 MB, 1314 cyl, 7 head, 42 sec, 512 bytes/sect x 392056 sectors
probe(asc0:2:0): max sync rate 4.90MB/s
sd2 at scsibus0 target 2 lun 0: <QUANTUM, PD425S, 535A> SCSI2 0/direct fixed
sd2: 406 MB, 1520 cyl, 9 head, 60 sec, 512 bytes/sect x 833150 sectors
probe(asc0:3:0): max sync rate 4.90MB/s
sd3 at scsibus0 target 3 lun 0: <QUANTUM, EMPIRE_1080S, 1100> SCSI2 0/direct fixed
sd3: 1029 MB, 2874 cyl, 8 head, 91 sec, 512 bytes/sect x 2109376 sectors
boot device: sd0
root on sd0a dumps on sd0b
warning: using RISC/os disk label
warning: using RISC/os disk label
warning: using RISC/os disk label
WARNING: clock gained 10957 days -- CHECK AND RESET THE DATE!
root file system type: ffs
init: not found
panic: no init
Stopped in init at      0x8011de10:     jr      ra
                bdslot: nop
db> 


--
Saku Setälä
System Planning Manager
Kolumbus Oy 	http://www.kolumbus.com/
Elisa Communications Group