Re: Ok, got further with 20000821 kernel

[David Brownlee <abs%netbsd.org@localhost>]

        Looks good - you probably need an /sbin/init and /dev/console now
        (you may want to play around with one of the non boot disks :)

        Alternatively if you are networked to another unix box you may be
        able to boot that kernel with '-a' and give le0 as the root
        device, then it should use DHCP to ask for a root partition etc,
        and nfs mount it.

-- 
                David/absolute          -- www.netbsd.org: No hype required --


On Fri, 4 May 2001, Saku Setala wrote:

>     Monitor: Version 5.43 OPT Mon May 13 17:31:12 PDT 1991 root
> Memory size: 67108864 (0x4000000) bytes, 64 MB
> Icache size: 32768 (0x8000) bytes
> Dcache size: 32768 (0x8000) bytes
> >> boot dksd(,,0)/netbsd
> 210192+58672+230560 entry: 0xa0600000
> Standalone Shell: Version 5.03 OPT Tue Apr 16 21:09:10 EDT 1991 root
>
> Loading dksd(,,0)/netbsd
> 1173136+578931+146800 entry: 0x80021000
> Copyright (c) 1996, 1997, 1998, 1999, 2000
>     The NetBSD Foundation, Inc.  All rights reserved.
> Copyright (c) 1982, 1986, 1989, 1991, 1993
>     The Regents of the University of California.  All rights reserved.
>
> NetBSD 1.5E (RC3230) #51: Mon Aug 21 22:10:25 NZST 2000
>     
> wdk%grunt.zl2bkc.niwa.cri.nz@localhost:/home2/netbsd/src/sys/arch/mipsco/compile/RC3230
> Mips 3230 Magnum (Pizazz)
> total memory = 67108864
> avail mem = 60268544
> using 844 buffers containing 3457024 bytes of memory
> mainbus0 (root)
> cpu0 at mainbus0: MIPS R3000 CPU (0x230) Rev. 3.0 with MIPS R3010 FPC Rev. 4.0
> cpu0: 32KB Instruction, 32KB Data, direct mapped cache
> obio0 at mainbus0
> le0 at obio0 addr 0xba000000: address 00:00:6b:81:5e:08
> le0: 16 receive buffers, 4 transmit buffers
> mkclock0 at obio0 addr 0xbd000000
> rambo0 at obio0 addr 0xbc000000: parity enabled
> fd0 at obio0 addr 0xbe000000: not fully implemented
> zsc0 at obio0 addr 0xbb000000
> zstty0 at zsc0 channel 0
> zstty1 at zsc0 channel 1 (console io)
> asc0 at obio0 addr 0xb8000000: NCR53C94, 24MHz, SCSI ID 7
> scsibus0 at asc0: 8 targets, 8 luns per target
> scsibus0: waiting 2 seconds for devices to settle...
> probe(asc0:0:0): max sync rate 4.80MB/s
> sd0 at scsibus0 target 0 lun 0: <MAXTOR, LXT-200S, 4.18> SCSI1 0/direct fixed
> sd0: 191 MB, 1314 cyl, 7 head, 42 sec, 512 bytes/sect x 392056 sectors
> probe(asc0:1:0): max sync rate 4.80MB/s
> sd1 at scsibus0 target 1 lun 0: <MAXTOR, LXT-200S, 4.18> SCSI1 0/direct fixed
> sd1: 191 MB, 1314 cyl, 7 head, 42 sec, 512 bytes/sect x 392056 sectors
> probe(asc0:2:0): max sync rate 4.90MB/s
> sd2 at scsibus0 target 2 lun 0: <QUANTUM, PD425S, 535A> SCSI2 0/direct fixed
> sd2: 406 MB, 1520 cyl, 9 head, 60 sec, 512 bytes/sect x 833150 sectors
> probe(asc0:3:0): max sync rate 4.90MB/s
> sd3 at scsibus0 target 3 lun 0: <QUANTUM, EMPIRE_1080S, 1100> SCSI2 0/direct 
> fixed
> sd3: 1029 MB, 2874 cyl, 8 head, 91 sec, 512 bytes/sect x 2109376 sectors
> boot device: sd0
> root on sd0a dumps on sd0b
> warning: using RISC/os disk label
> warning: using RISC/os disk label
> warning: using RISC/os disk label
> WARNING: clock gained 10957 days -- CHECK AND RESET THE DATE!
> root file system type: ffs
> init: not found
> panic: no init
> Stopped in init at      0x8011de10:     jr      ra
>                 bdslot: nop
> db>
>
>
> --
> Saku Setälä
> System Planning Manager
> Kolumbus Oy   http://www.kolumbus.com/
> Elisa Communications Group
>
>