Re: NWS-3260

[Jürgen Fricke <jdf%procube.com@localhost>]

Hi,

i used that image you give me the URL in your last message. Here
is the output below.

Hope that help.

Regards,
Jofry

--->
SONY NET WORK STATION R3000 Monitor Release 2.0A
Model NWS-3260, Machine ID #50033, Ethernet address 08:00:46:00:79:31

NEWS> T
Unknown command.
NEWS> bo fh()
NetBSD/newsmips Primary Boot

a0 0
a1 50007001
a2 823ffef4 (/boot)
a3 23f8000
a4 67696e66
a5 6f002e72
block_size  = 8192
block_count = 7
entry_point = 0xa0700000
reading block: 17 33 49 65 81 97 113 done
NetBSD/newsmips Secondary Boot, Revision 1.7
(tsutsui@mirage, Mon Sep 30 16:51:24 JST 2002)
HB system.
howto = 0x0
bootdev = 0x50007001
bootname =
maxmem = 0x23f8000
Booting fh(0,0,0)
trying fh(0,0,0)/netbsd...
devopen: fh(0,0,0)/netbsd
devname = fh(0,0,0), fd = 3
1765584+151148 [72592+60632]=0x1f49b8
entry = 0x80001000
ssym = 0x801d4f3c
esym = 0x801f59b8

consinit() done.
cpu_model = news3200
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.6H (GALANT) #130: Mon Sep 30 19:13:44 JST 2002
    tsutsui@mirage:/usr/src/sys/arch/newsmips/compile/GALANT
total memory = 36832 KB
avail memory = 31720 KB
using 486 buffers containing 1944 KB of memory
SONY NET WORK STATION, Model NWS-3260, Machine ID #50033
mainbus0 (root)
cpu0 at mainbus0: MIPS R3000A CPU (0x230) Rev. 3.0 with MIPS R3010 FPC 
Rev. 4.0
cpu0: 32KB/4B direct-mapped Instruction cache, 64 TLB entries
cpu0: 32KB/4B direct-mapped write-through Data cache
hb0 at mainbus0
le0 at hb0 addr 0xbff80000 level 1: address 08:00:46:00:79:31
le0: 8 receive buffers, 2 transmit buffers
mkclock0 at hb0 addr 0xbff407f8
zsc0 at hb0 addr 0xbfec0000 level 1
zstty0 at zsc0 channel 0 (console i/o)
zstty1 at zsc0 channel 1
kb0 at hb0 addr 0xbfd00000 level 2
wskbd0 at kb0 mux 1
ms0 at hb0 addr 0xbfd00004 level 2
wsmouse0 at ms0 mux 0
sc0 at hb0 addr 0xbfe00100 level 0
scsibus0 at sc0: 8 targets, 8 luns per target
scsibus0: waiting 2 seconds for devices to settle...
SC(t): [istatus=0x80, tstatus=0x2]
sd0 at scsibus0 target 0 lun 0: <SEAGATE, ST1480, 4511> SCSI2 0/direct 
fixed
sd0: 406 MB, 1476 cyl, 9 head, 62 sec, 512 bytes/sect x 832527 sectors
SC(t): [istatus=0x80, tstatus=0x2]
boot device: <unknown>
root device: sd0
dump device (default sd0b):
file system (default generic):
root on sd0a dumps on sd0b
SC(t): [istatus=0x80, tstatus=0x2]
SC(t): [istatus=0x80, tstatus=0x2]
SC(t): [istatus=0x80, tstatus=0x2]
no file system for sd0 (dev 0x0)
cannot mount root, error = 79
root device (default sd0a):
dump device (default sd0b):
file system (default generic):
root on sd0a dumps on sd0b
SC(t): [istatus=0x80, tstatus=0x2]
SC(t): [istatus=0x80, tstatus=0x2]
SC(t): [istatus=0x80, tstatus=0x2]
no file system for sd0 (dev 0x0)
cannot mount root, error = 79
root device (default sd0a):
dump device (default sd0b):
file system (default generic):
root on sd0a dumps on sd0b
SC(t): [istatus=0x80, tstatus=0x2]
SC(t): [istatus=0x80, tstatus=0x2]
SC(t): [istatus=0x80, tstatus=0x2]
no file system for sd0 (dev 0x0)
cannot mount root, error = 79
root device (default sd0a):
dump device (default sd0b):
file system (default generic):
root on sd0a dumps on sd0b
SC(t): [istatus=0x80, tstatus=0x2]
SC(t): [istatus=0x80, tstatus=0x2]
SC(t): [istatus=0x80, tstatus=0x2]
no file system for sd0 (dev 0x0)
cannot mount root, error = 79
root device (default sd0a):
<---
Am Montag den, 30. September 2002, um 15:45, schrieb Izumi Tsutsui:

> In article <D5327F08-D3D7-11D6-BBF9-000502C97D9D%procube.com@localhost>
> jdf%procube.com@localhost wrote:
>
> > If you are interested, i can send a NWS-3260 to you. If the job is not
> > to complex, i can do it by myself with some tips & hints from you.
>
> Okay, after testing several kernels, I've found that
> booting large kernels with current boot loader on serial console
> might have problem. Even boot.fs in 1.6-release does not boot
> on my 3470D with serial console, though it works fine on fb console..
>
> Would you please try the next image?
> http://www.ceres.dti.ne.jp/~tsutsui/netbsd/boot-newsmips-test.fs
> This image does not contain in-kernel ramdisk so it can't be used
> for installation, but if this kernel shows some message after boot,
> at least bootloader has some bugs (stack overflow or something).
> ---
> Izumi Tsutsui
> tsutsui%ceres.dti.ne.jp@localhost