Thanks for a very useful post. 
Is the vxt.sys a vms file? does not matter to me as long as i  can do <ha>.SYS
Why is tcp/ip boot so much slower than mopboot?

Fred

Re  the Ultrix dec mips binaries:  how can I upgrade/rescue a system with ultrix
(4.X?) on the hdd but where i dont have the root pwd ?

> -----Original Message-----
> From:	Anders Hogrelius [SMTP:ahs@hogrelius.nu]
> Sent:	Friday, November 15, 2002 6:33 PM
> To:	John Maier
> Cc:	Louis Wevers; port-pmax@netbsd.org
> Subject:	Re: VXT-2000
> 
> 
> To restore the VXT to the factory settings, which will make it possible to
> re-enable Motif and reset IP and so forth, follow the instructions below.
> They are an excerpt of the manual for the VXT terminal.
> 
> <snip>
> A.3 Restoring the Terminal to Factory-Default Settings
>   You can reset the VXT 2000 windowing terminal's non-
>   volatile RAM (NVRAM) to the factory-default settings by
>   entering a console command.
>   1. Place the terminal in console mode by pressing Ctrl+Alt+keypad .
>   or pressing the halt button on the rear of the terminal.
>   2. At the >>> console prompt, enter the following command:
>      >>> T/UTIL 1
>   When you boot the terminal successfully it saves a record
>   of the successful booting method used. When you reboot the
>   terminal, it tries using this saved method first. You can clear
>   this saved state while booting the terminal:
>   >>> B/10000
> </snip>
> 
> The complete manual can be viewed at http://www.hogrelius.nu/~ahs/vxt/
> and the software packages that are available for VMS can be found at
> ftp://ftp.hogrelius.nu/private/ahs/vxt
> 
> --
> cheers,
> 
> /Anders
> 
> Pain is a thing of the mind.  The mind can be controlled.
> 		-- Spock, "Operation -- Annihilate!" stardate 3287.2
> 
> *************************************************************************
> * Anders Hogrelius       Phone : +46 (0)70 6770210
> * Tessingatan 12         E-mail: anders@hogrelius.nu
> * SE-72216 Vasteras      Web:    http://www.hogrelius.nu/~ahs/
> * SWEDEN