MPC824x JTAG success story

To: port-powerpc%NetBSD.org@localhost
Subject: MPC824x JTAG success story
From: Frank Wille <frank%phoenix.owl.de@localhost>
Date: Mon, 28 Nov 2011 09:56:48 +0100

Hi!

Some days ago I succeeded in using JTAG with a cheap and customized
ByteblasterMV cable and the open source software UrJTAG, to unbrick an
MPC8241 based Sandpoint NAS.

As many PowerPC CPUs use the same 16-pin JTAG/COP interface my article
might be interesting for others too, because it addresses common problems.

http://sun.hasenbraten.de/~frank/docs/mpc824x_JTAG.html

(Don't hesitate to tell me about any errors in the article. English is
not my native language and I'm not a hardware expert.)

-- 
Frank Wille

Prev by Date: Package binaries for NetBSD/macppc 4.0 / pkgsrc-2011Q3
Next by Date: How to use a bus_space at the end of a 32-bit address space?
Previous by Thread: Package binaries for NetBSD/macppc 4.0 / pkgsrc-2011Q3
Next by Thread: How to use a bus_space at the end of a 32-bit address space?
Indexes:

Home | Main Index | Thread Index | Old Index