Announcing KuroBox support

["Toru Nishimura" <locore64%alkyltechnology.com@localhost>]

NetBSD/sandpoint now supports KuroBox . It will continue
to accumulate other models MPC8241/8245 based
consumer grade NAS products.  Feature highlights;

- soft control power switch, which can works with
powerd(8).
- /dev/satmgr device useful to mimick all the functionality
of the original NAS CGI.
- DHCP/NFS bootable (diskboot feature will be added)
- known good for Synology DS108g+ and KuroBox; tests
on other models are under way.

The complete bootoff-powerdown sequence is shown
below;

U-Boot 1.1.4 LiSt 2.1.0 (Sep 21 2006 - 00:22:56) LinkStation / KuroBox

CPU:   MPC8245 Revision 1.4 at 196.608 MHz: 16 kB I-Cache 16 kB D-Cache
DRAM:  64 MB
FLASH:  4 MB
       00  0b  1317  0985  0200  ff
       00  0c  1095  0680  0101  ff
       00  0e  1033  0035  0c03  ff
       00  0e  1033  0035  0c03  ff
       00  0e  1033  00e0  0c03  ff
Net:   COMET#0
stdin :   serial
stdout:   serial
stderr:   serial
IDE:   Bus 0: ...OK 
 Device 0: Model: HDS728080PLAT20 Firm: PF2OA2AA Ser#: PFD219EJRD0G1E
           Type: Hard Disk
           Supports 48-bit addressing
           Capacity: 78533.4 MB = 76.6 GB (160836480 x 512)
=> run diskless
BOOTP broadcast 1
DHCP client bound to address 192.168.24.66
Using COMET#0 device
TFTP from server 192.168.24.24; our IP address is 192.168.24.66
Filename 'netboot.bin'.
Load address: 0x1000000
Loading: ############
done
Bytes transferred = 56784 (ddd0 hex)
## Starting application at 0x01000000 ...

> > NetBSD/sandpoint Boot, Revision maintainance
> > (nisimura@paq17, Fri May 28 08:54:04 JST 2010)
KuroBox, cpu 195 MHz, bus 97 MHz, 64MB SDRAM
1095.0680 IDE 00:12:00
1317.0985 NIC 00:11:00
00:00:00: chip 1057.0006 card ffff.ffff rev 14 class 06.00.00 hdr 00
mem base 80000000 size 1000
00:11:00: chip 1317.0985 card 0000.0000 rev 11 class 02.00.00 hdr 00
i/o base 1000 size 100
mem base 80001000 size 1000
00:12:00: chip 1095.0680 card 1095.0680 rev 02 class 01.01.85 hdr 00
i/o base 1100 size 10
i/o base 1110 size 10
i/o base 1120 size 10
i/o base 1130 size 10
i/o base 1140 size 10
mem base 80002000 size 1000
00:14:00: chip 1033.0035 card 1033.0035 rev 43 class 0c.03.10 hdr 80
mem base 80003000 size 1000
00:14:01: chip 1033.0035 card 1033.0035 rev 43 class 0c.03.10 hdr 00
mem base 80004000 size 1000
00:14:02: chip 1033.00e0 card 1033.00e0 rev 04 class 0c.03.20 hdr 00
mem base 80005000 size 1000
MAC address 00:07:40:a4:48:6e
100Mbps-FDX
loading "netbsd-NAS" 2873052+241652 [169872+162003]=0x349bb4
entry=0x00090000, ssym=0x003886d0, esym=0x003d9bb4
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
   2006, 2007, 2008, 2009, 2010
   The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
   The Regents of the University of California.  All rights reserved.

NetBSD 5.99.29 (KUROBOX) #73: Sun May 30 07:02:39 JST 2010
       nisimura@paq17:/store/HEAD/usr/src/sys/arch/sandpoint/compile/KUROBOX
total memory = 65536 KB
avail memory = 59708 KB
OpenPIC Version 1.2: Supports 1 CPUs and 26 interrupt sources.
mainbus0 (root)
cpu0 at mainbus0: 8245 (Revision 0.4), ID 0 (primary)
cpu0: HID0 0x90c000<DOZE,DPM,ICE,DCE>, powersave: 1
eumb0 at mainbus0
com0 at eumb0 unit 1: ns16550a, working fifo
com0: console
ociic0 at eumb0
iic0 at ociic0: I2C bus
rs5c372rtc0 at iic0 addr 0x32: RICOH RS5C372[AB] Real-time Clock
satmgr0 at eumb0 unit 0: button manager (kurobox)
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1057 product 0x0006 (rev. 0x14)
tlp0 at pci0 dev 11 function 0: ADMtek AN985 Ethernet, pass 1.1
tlp0: interrupting at irq 16
tlp0: Ethernet address 00:07:40:a4:48:6e
ukphy0 at tlp0 phy 1: OUI 0x00e092, model 0x0001, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cmdide0 at pci0 dev 12 function 0: Silicon Image 0680 (rev. 0x02)
cmdide0: primary channel wired to native-PCI mode
cmdide0: using irq 17 for native-PCI interrupt
atabus0 at cmdide0 channel 0
cmdide0: secondary channel wired to native-PCI mode
atabus1 at cmdide0 channel 1
ohci0 at pci0 dev 14 function 0: vendor 0x1033 product 0x0035 (rev. 0x43)
ohci0: interrupting at irq 19
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
ohci1 at pci0 dev 14 function 1: vendor 0x1033 product 0x0035 (rev. 0x43)
ohci1: interrupting at irq 19
ohci1: OHCI version 1.0
usb1 at ohci1: USB revision 1.0
ehci0 at pci0 dev 14 function 2: vendor 0x1033 product 0x00e0 (rev. 0x04)
ehci0: interrupting at irq 19
ehci0: companion controllers, 3 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
biomask 8000038 netmask 8000038 ttymask 8000038
uhub0 at usb0: vendor 0x1033 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1 at usb1: vendor 0x1033 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2 at usb2: vendor 0x1033 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
wd0 at atabus0 drive 0: <HDS728080PLAT20>
wd0: 78533 MB, 159560 cyl, 16 head, 63 sec, 512 bytes/sect x 160836480 sectors
boot device: tlp0
root on tlp0
nfs_boot: trying BOOTP
nfs_boot: BOOTP next-server: 192.168.24.24
nfs_boot: my_addr=192.168.24.66
nfs_boot: my_mask=255.255.255.0
nfs_boot: gateway=192.168.24.1
root on 192.168.24.24:/store/exports/nas
root file system type: nfs
Sun May 30 07:04:12 JST 2010
Starting file system checks:
Setting tty flags.
Setting sysctl variables:
kern.no_sa_support: 1 -> 1
ddb.onpanic: 1 -> 0
Hostname: nas8245
IPv6 mode: host
Configuring network interfaces:.
Adding interface aliases:.
add net default: gateway 192.168.24.1
Building databases: dev, utmp, utmpx done
Starting syslogd.
Checking for core dump...
savecore: no core dump (no dumpdev)
Mounting all filesystems...
Clearing temporary files.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
Starting virecover.
Starting local daemons:.
Updating motd.
Starting inetd.
Starting cron.
Sun May 30 07:04:20 JST 2010

NetBSD/sandpoint (nas8245) (tty00)

login: satmgr0: power button pressed, shutting down!
syncing disks... done
unmounting file systems... done

---