Hey there,
I really like the idea of having netbsd on my Qnap TS-101 box.
Unfortunately I am struggling with getting the installer to boot. I
tried various altboot and netbsd-INSTALL images and ended up with
netbsd from HEAD/201108250420Z and altboot from ftp://ftp.netbsd.org/pub/NetBSD/misc/phx/sandpoint/altboot.bin.gz
.
Here's the output:
U-Boot 1.1.2 (Aug 28 2005 - 13:37:25) QNAP System, Inc.
CPU: MPC8245 Revision 1.4 at 266.666 MHz: 16 kB I-Cache 16 kB
D-Cache
Board: Sandpoint 8245 Unity ##Test not implemented yet##
I2C: ready
DRAM: 64 MB
FLASH: S29GL128N, 16 MB
In: serial
Out: serial
Err: serial
Net: No ethernet found.
Hit any key to stop autoboot: 0
=> loadb 1000000
## Ready for binary (kermit) download to 0x01000000 at 115200
bps...
## Total Size = 0x0001289c = 75932 Bytes
## Start Addr = 0x01000000
=> go 1000000 tftp:netbsd-INSTALL
## Starting application at 0x01000000 ...
>> NetBSD/sandpoint altboot, revision 1.7 (Sun May 29
15:37:31 CEST 2011)
>> QNAP TS, cpu 265 MHz, bus 132 MHz, 64MB SDRAM
wd0: <ST9120822AS> DMA LBA LBA48 114472 MB
wd0: no disklabel
MAC address 00:e0:4c:69:XX:XX
100Mbps-FDX
Hit any key to enter interactive mode: 0
loading "netbsd-INSTALL" 5154124timeout
timeout
timeout
timeout
timeout
read text error: Unknown error: code 60
entry=0x4500, ssym=0x3006800, esym=0x10fffc4
NIP: 00004500 XER: 20000000 LR: 01000E64 REGS: 010ffe8c TRAP: 0700
DAR: 03F2DCA3
MSR: 0008b032 EE: 1 PR: 0 FP: 1 ME: 1 IR/DR: 11
GPR00: 00000000 010FFF7C FFFFFF1F 03006800 010FFFC4 00000000
00004000 00004500
GPR08: 00000020 01010000 FC004505 B007BABE 9AA3EF98 22000810
03FF8000 040CE000
GPR16: 010109EC 01010000 01010000 03F2DC98 00000001 00000000
00000000 00000000
GPR24: 03F2DD9C 00000002 00000001 00000004 03F2DCA3 03F2DCA3
01010D3C 00000000
Call backtrace:
Program Check Exception
As you can see, the transfer of the image stops and five timeouts
are displayed. The complete process should go something like this:
loading "netbsd-INSTALL" 5143540+110580=0x503068
The Wireshark output related to this error is:
TFTP Error Code, Code: Disk full or allocation
exceeded, Message: \000
I tested it with tftpd-hpa under ubuntu and tftpd32 under windows
with the same error.
I would be glad if you could provide me some help.
Thanks a lot!
Hannes
|