NetBSD-8.0 on KUROBOX dmesg full

[Toru Nishimura <tsleep32%gmail.com@localhost>]

Hi, folks.

Here is the full text of NetBSD-8.0 on my black KUROBOX.
The installation was done as upgrade from RC2.  The unit is the
machine which made sandpoint porting possible nearly 10 years ago.

Toru Nishimura / ALKYL Technology

 U-Boot 1.1.4 LiSt 2.1.0 (Sep 21 2006 - 00:22:56) LinkStation / KuroBox

CPU:   MPC8245 Revision 1.4 at 196.608 MHz: 16 kB I-Cache 16 kB D-Cache
DRAM:  64 MB
FLASH:  4 MB
        00  0b  1317  0985  0200  ff
        00  0c  1095  0680  0101  ff
        00  0e  1033  0035  0c03  ff
        00  0e  1033  0035  0c03  ff
        00  0e  1033  00e0  0c03  ff
Net:   COMET#0
stdin :   serial
stdout:   serial
stderr:   serial
IDE:   Bus 0: OK
  Device 0: Model: Hitachi HDS721680PLAT80 Firm: P21OA8BA Ser#: PV6874ZE04EN1N
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 76319.0 MB = 74.5 GB (156301488 x 512)
Boot in 01 seconds ('s' to stop)...
## Starting application at 0x01000000 ...

>> NetBSD/sandpoint altboot, revision 1.11 (Tue Jul 17 14:59:51 UTC 2018)
>> KuroBox, cpu 195 MHz, bus 97 MHz, 64MB SDRAM
channel 0 present
wd0: <Hitachi HDS721680PLAT80> DMA LBA LBA48 76319 MB
wd0a: ffs       (63)
wd0b: swap      (4195359)
wd0d: ffs       (5244687)
MAC address 00:07:40:a4:48:6e
100Mbps-FDX
Hit any key to enter interactive mode: 0
loading "netbsd" 3664324+135652 [212992+204291]=0x405dbc
entry=0x90000, ssym=0x42fba8, esym=0x495dbc
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
    2018 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 8.0 (KUROBOX) #0: Tue Jul 17 14:59:51 UTC 2018
        mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/sandpoint/compile/KUROBOX
Model: kurobox
total memory = 65536 KB
avail memory = 59064 KB
OpenPIC Version 1.2: Supports 1 CPUs and 26 interrupt sources.
mainbus0 (root)
cpu0 at mainbus0: 8245 (Revision 0.4), ID 0 (primary)
cpu0: HID0 0x90c000<DOZE,DPM,ICE,DCE>, powersave: 1
cpu0: 195.12 MHz
eumb0 at mainbus0
com0 at eumb0 unit 1: ns16550a, working fifo
com0: console
com0: interrupting at irq 41
ociic0 at eumb0
iic0 at ociic0: I2C bus
rs5c372rtc0 at iic0 addr 0x32: RICOH RS5C372[AB] Real-time Clock
satmgr0 at eumb0 unit 0: button manager (kurobox)
satmgr0: interrupting at irq 40
cfi at mainbus0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0
pchb0: vendor 1057 product 0006 (rev. 0x14)
tlp0 at pci0 dev 11 function 0: ADMtek AN985 Ethernet, pass 1.1
tlp0: interrupting at irq 16
tlp0: Ethernet address 00:07:40:a4:48:6e
ukphy0 at tlp0 phy 1: OUI 0x00e092, model 0x0001, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cmdide0 at pci0 dev 12 function 0: Silicon Image 0680 (rev. 0x02)
cmdide0: primary channel wired to native-PCI mode
cmdide0: using irq 17 for native-PCI interrupt
atabus0 at cmdide0 channel 0
cmdide0: secondary channel wired to native-PCI mode
atabus1 at cmdide0 channel 1
ohci0 at pci0 dev 14 function 0: vendor 1033 product 0035 (rev. 0x43)
ohci0: interrupting at irq 19
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
ohci1 at pci0 dev 14 function 1: vendor 1033 product 0035 (rev. 0x43)
ohci1: interrupting at irq 19
ohci1: OHCI version 1.0
usb1 at ohci1: USB revision 1.0
ehci0 at pci0 dev 14 function 2: vendor 1033 product 00e0 (rev. 0x04)
ehci0: interrupting at irq 19
ehci0: 2 companion controllers, 3 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
vmmask 1c000000 schedmask 1c000000 highmask 7c000000
uhub0 at usb0: vendor 1033 (0x1033) OHCI root hub (0000), class 9/0,
rev 1.00/1.00, addr 1
uhub1 at usb1: vendor 1033 (0x1033) OHCI root hub (0000), class 9/0,
rev 1.00/1.00, addr 1
uhub2 at usb2: vendor 1033 (0x1033) EHCI root hub (0000), class 9/0,
rev 2.00/1.00, addr 1
wd0 at atabus0 drive 0
wd0: <Hitachi HDS721680PLAT80>
wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/sandpoint/8.0/modules
Sat Jul 21 10:40:34 JST 2018
Starting root file system check:
/dev/rwd0a: file system is clean; not checking
swapctl: setting dump device to /dev/wd0b
swapctl: adding /dev/wd0b as swap device at priority 0
Starting file system checks:
/dev/rwd0d: file system is clean; not checking
random_seed: /var/db/entropy-file: Not present
Setting tty flags.
Setting sysctl variables:
ddb.onpanic: 1 -> 0
Starting network.
Hostname: nas8245
IPv6 mode: host
Configuring network interfaces: tlp0.
Adding interface aliases:.
Waiting for DAD to complete for statically configured addresses...
Building databases: dev, utmp, utmpx.
Starting syslogd.
Starting rpcbind.
Mounting all file systems...
Checking quotas: done.
Starting mountd.
Starting nfsd.
Starting statd.
Starting lockd.
Setting securelevel: kern.securelevel: 0 -> 1
swapctl: setting dump device to /dev/wd0b
Starting virecover.
Starting local daemons:.
Updating motd.
Starting sshd.
Starting inetd.
Starting cron.
Sat Jul 21 10:40:53 JST 2018

NetBSD/sandpoint (nas8245) (console)

login: root
Jul 21 10:42:01 nas8245 login: ROOT LOGIN (root) on tty console
Last login: Sat Jul 21 10:40:02 2018 on console
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
    2018 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 8.0 (KUROBOX) #0: Tue Jul 17 14:59:51 UTC 2018
You have new mail.
Terminal type is vt100.
We recommend that you create a non-root account and use su(1) for root access.
nas8245# ls /
.cshrc              netbsd              netbsd.5.99.60#103  netbsd.799.26#1
.profile            netbsd-INSTALL_KURO netbsd.5.99.60#104  netbsd.8.0
.sysinst            netbsd.5.99.30#1    netbsd.5.99.60#5    netbsd.8.0_RC1
LABEL               netbsd.5.99.31#80   netbsd.5.99.64#108  proc
altroot             netbsd.5.99.45#0    netbsd.5.99.64#109  removal
bin                 netbsd.5.99.46#93   netbsd.5.99.65#112  rescue
cdrom               netbsd.5.99.47#95   netbsd.6.0_BETA#0   root
dev                 netbsd.5.99.47#97   netbsd.6.99.1       sbin
etc                 netbsd.5.99.47#98   netbsd.6.99.4#3     stand
kern                netbsd.5.99.55#100  netbsd.6.99.4#4     store
lib                 netbsd.5.99.59#7    netbsd.6.99.5#5     tmp
libdata             netbsd.5.99.60#0    netbsd.6.99.6#11    usr
libexec             netbsd.5.99.60#1    netbsd.6.99.6#7     var
mnt                 netbsd.5.99.60#101  netbsd.6.99.6#8
nas8245#