NetbSD/sandpoint is still alive and kicking.
ago. Everything is working as designed including HTTPS installation from
NYCDN.netbsd.org.
Toru Nishimura / ALKYL Technology
U-Boot 2009.06-BUFFALO-svn1376 (Jul 11 2009 - 04:11:01) KURO-NAS/T4
CPU: MPC8245/8241 Revision 1.4 at 262.144 MHz: 16 kB I-Cache 16 kB D-Cache
DRAM: 128 MB
FLASH: 4 MB
In: serial
Out: serial
Err: serial
Net: RTL8169#0
Boot in 05 seconds ('s' to stop)...
## Starting application at 0x01000000 ...
>> NetBSD/sandpoint altboot, revision 1.10 (Thu Oct 15 20:03:16 JST 2015)
>> KuroBox/T4, cpu 262 MHz, bus 131 MHz, 128MB SDRAM
port 0 present
port 1 present
wd0: <WDC WD800JD-00MSA1> DMA LBA LBA48 76319 MB
wd0a: ffs (63)
wd0b: swap (4195360)
wd0d: ffs (6291456)
wd1: <WDC WD800JD-00MSA1> DMA LBA LBA48 76319 MB
wd1a: ffs (63)
wd1b: swap (4195359)
wd1d: ffs (5244687)
port 0 present
wd2: <WDC WD800JD-00MSA1> DMA LBA LBA48 76319 MB
wd2 blk 0
wd2 blk 0
wd2: no disklabel
MAC address 00:16:01:0a:a3:6d
1000Mbps-FDX
Hit any key to enter interactive mode: 0
loading "netbsd" 4154100+133932+230266=0x488e8c
entry=0x90000, ssym=0x4a6e20, esym=0x518e8c
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[ 1.0000000] 2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.
[ 1.0000000] NetBSD 9.99.73 (KUROBOX) #0: Tue Sep 22 06:23:33 UTC 2020
[ 1.0000000] mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/sandpoint/compile/KUROBOX
[ 1.0000000] Model: kurot4
[ 1.0000000] total memory = 128 MB
[ 1.0000000] avail memory = 119 MB
[ 1.0000000] OpenPIC Version 1.2: Supports 1 CPUs and 26 interrupt sources.
[ 1.0000000] entropy: no seed from bootloader
[ 1.0000000] mainbus0 (root)
[ 1.0000000] cpu0 at mainbus0: 8245 (Revision 0.4), ID 0 (primary)
[ 1.0000000] cpu0: HID0 0x90c000<DOZE,DPM,ICE,DCE>, powersave: 1
[ 1.0000000] cpu0: 262.14 MHz
[ 1.0000000] eumb0 at mainbus0
[ 1.0000000] com0 at eumb0 unit 1: ns16550a, working fifo
[ 1.0000000] com0: console
[ 1.0000000] com0: interrupting at irq 41
[ 1.0000000] ociic0 at eumb0
[ 1.0000000] iic0 at ociic0: I2C bus
[ 1.0000000] rs5c372rtc0 at iic0 addr 0x32: RICOH RS5C372[AB] Real-time Clock
[ 1.0000000] satmgr0 at eumb0 unit 0: button manager (kurot4)
[ 1.0000000] satmgr0: interrupting at irq 40
[ 1.0000000] cfi at mainbus0 not configured
[ 1.0000000] pci0 at mainbus0 bus 0
[ 1.0000000] pchb0 at pci0 dev 0 function 0
[ 1.0000000] pchb0: vendor 1057 product 0006 (rev. 0x14)
[ 1.0000000] re0 at pci0 dev 11 function 0: RealTek 8169/8110 Gigabit Ethernet (rev. 0x10)
[ 1.0000000] re0: interrupting at irq 16
[ 1.0000000] re0: RTL8169S (0x0400)
[ 1.0000000] re0: Ethernet address 00:16:01:0a:a3:6d
[ 1.0000000] rgephy0 at re0 phy 7: RTL8211 1000BASE-T media interface
[ 1.0000000] rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.0000000] satalink0 at pci0 dev 12 function 0: Silicon Image SATALink 3512 (rev. 0x01)
[ 1.0000000] satalink0: using irq 17 for native-PCI interrupt
[ 1.0000000] atabus0 at satalink0 channel 0
[ 1.0000000] atabus1 at satalink0 channel 1
[ 1.0000000] satalink1 at pci0 dev 13 function 0: Silicon Image SATALink 3512 (rev. 0x01)
[ 1.0000000] satalink1: using irq 20 for native-PCI interrupt
[ 1.0000000] atabus2 at satalink1 channel 0
[ 1.0000000] atabus3 at satalink1 channel 1
[ 1.0000000] ohci0 at pci0 dev 14 function 0: vendor 1033 product 0035 (rev. 0x43)
[ 1.0000000] ohci0: interrupting at irq 19
[ 1.0000000] ohci0: OHCI version 1.0
[ 1.0000000] usb0 at ohci0: USB revision 1.0
[ 1.0000000] ohci1 at pci0 dev 14 function 1: vendor 1033 product 0035 (rev. 0x43)
[ 1.0000000] ohci1: interrupting at irq 19
[ 1.0000000] ohci1: OHCI version 1.0
[ 1.0000000] usb1 at ohci1: USB revision 1.0
[ 1.0000000] ehci0 at pci0 dev 14 function 2: vendor 1033 product 00e0 (rev. 0x04)
[ 1.0000000] ehci0: interrupting at irq 19
[ 1.0000000] ehci0: 2 companion controllers, 3 ports each: ohci0 ohci1
[ 1.0000000] usb2 at ehci0: USB revision 2.0
[ 1.0000000] vmmask f000000 schedmask f000000 highmask 7f000000
[ 1.0000000] entropy: WARNING: extracting entropy too early
[ 1.0999624] satalink0: port 0: device present, speed: 1.5Gb/s
[ 1.2099637] satalink0: port 1: device present, speed: 1.5Gb/s
[ 1.3199635] satalink1: port 0: device present, speed: 1.5Gb/s
[ 1.4399640] wd0 at atabus0 drive 0
[ 1.4999692] wd0: <WDC WD800JD-00MSA1>
[ 1.4999692] wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
[ 1.4999692] uhub0 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[ 1.4999692] uhub1 at usb1: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[ 1.4999692] uhub2 at usb2: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[ 1.6399717] wd1 at atabus1 drive 0
[ 1.6399717] wd1: <WDC WD800JD-00MSA1>
[ 1.6399717] wd1: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
[ 1.7099764] wd2 at atabus2 drive 0
[ 1.7099764] wd2: <WDC WD800JD-00MSA1>
[ 1.7099764] wd2: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
[ 2.3999771] boot device: wd0
[ 2.3999771] root on wd0a dumps on wd0b
[ 2.4399717] root file system type: ffs
[ 2.4399717] kern.module.path=/stand/sandpoint/9.99.73/modules
Wed Sep 23 16:40:38 JST 2020
Starting root file system check:
/dev/rwd0a: file system is clean; not checking
swapctl: setting dump device to /dev/wd0b
swapctl: adding /dev/wd0b as swap device at priority 0
Starting file system checks:
/dev/rwd1d: file system is clean; not checking
rndctl: no entropy in seed
[ 5.0000150] entropy: WARNING: consolidating less than full entropy
Setting tty flags.
Setting sysctl variables:
ddb.onpanic: 1 -> 0
Starting network.
Hostname: kuro3.local
IPv6 mode: host
Configuring network interfaces: re0.
Adding interface aliases:.
add net default: gateway 192.168.24.1
Waiting for duplicate address detection to finish...
Building databases: dev, utmp, utmpx.
Starting syslogd.
Mounting all file systems...
Clearing temporary files.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
swapctl: setting dump device to /dev/wd0b
Starting virecover.
Checking for core dump...
savecore: no core dump
Starting local daemons:.
Updating motd.
Starting postfix.
Starting inetd.
Starting cron.
Wed Sep 23 16:41:01 JST 2020
NetBSD/sandpoint (kuro3.local) (console)
login: root
Sep 23 16:41:22 kuro3 login: ROOT LOGIN (root) on tty console
Last login: Wed Sep 23 16:39:21 2020 on console
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 9.99.73 (KUROBOX) #0: Tue Sep 22 06:23:33 UTC 2020
Welcome to NetBSD!
You have mail.
We recommend that you create a non-root account and use su(1) for root access.
kuro3# ls /
.cshrc netbsd-INSTALL_KURO.7.00
.profile netbsd-KUROBOX-HEAD
.sysinst netbsd.6.99.6#0
altroot netbsd.6.99.6#12
bin netbsd.7.00.KUROBOX.201509250726Z
cdrom onetbsd
dev proc
etc rescue
kern root
lib sbin
libdata stand
libexec store
mnt tmp
netbsd usr
netbsd-INSTALL_KURO var
kuro3#