resend: free O2 in Silicon Valley, CA USA

[Steve Rikli <sr%genyosha.net@localhost>]

One more try at giving away my SGI O2 before I offer it to other
opensource projects, and/or craigslist:


I have an SGI O2 that I haven't used in a while, so it's time to
pass it along to someone else to enjoy.  Basic specs:

  O2, 1*180MHz R5000 CPU, 320MB RAM, 2*72GB SCSI disks, CDROM,
  PCI Adaptec SCSI card, spare PCI 2nd ethernet, spare disk caddy,
  spare 72GB SCSI disk, spare PCI riser, IRIX CD set

IRIX PROM 'hinv' and NetBSD 'dmesg' are included below.

The only blemish on this O2 is it's missing the blue skins -- i.e. 
it only has the plastic "skirt" around the bottom, and the rest of
the square metal chassis is intact, but uncovered.  I can probably
send a picture if anyone is really interested for some reason, but
if you're familiar with the rackmount O2 option SGI sold for a
little while, it looks pretty much just like that.  The insides
are totally functional.

All I ask in return is reimbursement for shipping (in $US funds only
please), and local pickups are also welcome.

Cheers,
sr.
--

> hinv
                   System: IP32
                Processor: 180 Mhz R5000, with FPU
     Primary I-cache size: 32 Kbytes
     Primary D-cache size: 32 Kbytes
     Secondary cache size: 512 Kbytes
              Memory size: 320 Mbytes
                 Graphics: CRM, Rev C
                    Audio: A3 version 1
                SCSI Disk: scsi(0)disk(1)
                SCSI Disk: scsi(0)disk(2)
               SCSI CDROM: scsi(0)cdrom(4)

---

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.0.1 (GENERIC32_IP3x) #0: Thu Jul 30 06:56:22 UTC 2009
        
builds%b6.netbsd.org@localhost:/home/builds/ab/netbsd-5-0-1-RELEASE/sgimips/200907292356Z-obj/home/builds/ab/netbsd-5-0-1-RELEASE/src/sys/arch/sgimips/compile/GENERIC32_IP3x
total memory = 256 MB
(6848 KB reserved for ARCS)
avail memory = 237 MB
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root): SGI-IP32 [SGI, 2], 1 processor
cpu0 at mainbus0: MIPS R5000 CPU (0x2321) Rev. 2.1 with built-in FPU Rev. 1.0
cpu0: 32KB/32B 2-way set-associative L1 Instruction cache, 48 TLB entries
cpu0: 32KB/32B 2-way set-associative write-back L1 Data cache
cpu0: 512KB/32B direct-mapped write-through L2 Unified cache
crime0 at mainbus0 addr 0x14000000: rev 1.1 (CRIME_ID: 161)
crmfb0 at mainbus0 addr 0x16000000: SGI CRIME Graphics Display Engine
crmfb0: device unusable if not setup by firmware
mace0 at mainbus0 addr 0x1f000000
lpt0 at mace0 offset 0x380000 intr 4 intrmask 0xf0000
com0 at mace0 offset 0x390000 intr 4 intrmask 0x3f00000: ns16550a, working fifo
com0: console
com1 at mace0 offset 0x398000 intr 4 intrmask 0xfc000000: ns16550a, working fifo
macekbc0 at mace0 offset 0x320000 intr 5 intrmask 0x0: PS2 controller
mcclock0 at mace0 offset 0x3a0000 intrmask 0x0
mec0 at mace0 offset 0x280000 intr 3 intrmask 0x0: MAC-110 Ethernet, rev 1
mec0: Ethernet address 08:00:69:0c:00:32
nsphy0 at mec0 phy 8: DP83840 10/100 media interface, rev. 0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
mavb0 at mace0 offset 0x300000 intr 6 intrmask 0x0: AD1843 rev 1
audio0 at mavb0: full duplex, independent
macepci0 at mace0 offset 0x80000 intr 7 intrmask 0x0: rev 1
PCI bus 0: Warning: Total bandwidth exceeded!?
pci0 at macepci0 bus 0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
ahc0 at pci0 dev 1 function 0: Adaptec aic7880 Ultra SCSI adapter
ahc0: interrupting at crime interrupt 8
ahc0: Using left over BIOS settings
ahc0: Host Adapter has no SEEPROM. Using default SCSI target parameters
ahc0: aic7880: Ultra Wide Channel A, SCSI Id=0, 16/253 SCBs
scsibus0 at ahc0: 16 targets, 8 luns per target
ahc1 at pci0 dev 2 function 0: Adaptec aic7880 Ultra SCSI adapter
ahc1: interrupting at crime interrupt 9
ahc1: Using left over BIOS settings
ahc1: Host Adapter has no SEEPROM. Using default SCSI target parameters
ahc1: aic7880: Ultra Wide Channel A, SCSI Id=0, 16/253 SCBs
scsibus1 at ahc1: 16 targets, 8 luns per target
ahc2 at pci0 dev 3 function 0: Adaptec 2940 Ultra SCSI adapter
ahc2: interrupting at crime interrupt 10
ahc2: aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
scsibus2 at ahc2: 16 targets, 8 luns per target
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "mips3_cp0_counter" frequency 90006210 Hz quality 100
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
scsibus2: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 1 lun 0: <NETAPP, X243_FAL7E073S10, NA00> disk fixed
sd0: 70092 MB, 29902 cyl, 8 head, 600 sec, 512 bytes/sect x 143550456 sectors
sd0: sync (50.00ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing
sd1 at scsibus0 target 2 lun 0: <NETAPP, X243_FAL7E073S10, NA00> disk fixed
sd1: 70092 MB, 29902 cyl, 8 head, 600 sec, 512 bytes/sect x 143550456 sectors
sd1: sync (50.00ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing
cd0 at scsibus0 target 4 lun 0: <TOSHIBA, CD-ROM XM-5401TA, 3605> cdrom 
removable
cd0: sync (236.00ns offset 15), 8-bit (4.237MB/s) transfers
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs