I can't get my tape device to work.. Asked a few people, got the device
made, but when I try to use it, it says:

# tar -tvf /dev/rst0
tar: can't open /dev/rst0 : Operation not supported by device
# tar -tvf /dev/st0
tar: can't open /dev/st0 : Operation not supported by device

	I've tried basically all the devices, no luck.. I don't know
what's wrong, exactly. But I thought this might have something to do with
it:

real mem = 33095680
avail mem = 29691904
using 404 buffers containing 1654784 bytes of memory
mainbus0 (root)
cpu0 at mainbus0: SUNW,Sun 4/50 (W8601/8701 or MB86903 @ 40 MHz, on-chip 
FPU)
cpu0: cache chip bug; trap page uncached
cpu0: 65536 byte write-through, 32 bytes/line, hw flush cache enabled
memreg0 at mainbus0 ioaddr 0xf4000000
clock0 at mainbus0 ioaddr 0xf2000000: mk48t02 (eeprom)
timer0 at mainbus0 ioaddr 0xf3000000
zs0 at mainbus0 ioaddr 0xf1000000 pri 12, softpri 6
zs1 at mainbus0 ioaddr 0xf0000000 pri 12, softpri 6
audio0 at mainbus0 ioaddr 0xf7201000 pri 13, softpri 4
auxreg0 at mainbus0 ioaddr 0xf7400003
sbus0 at mainbus0 ioaddr 0xf8000000: clock = 20 MHz
dma0 at sbus0 slot 0 offset 0x400000: rev 2
esp0 at sbus0 slot 0 offset 0x800000 pri 3: ESP100A, clock = 20 MHz, ID = 
7
tg0 at esp0 target 3
sd0 at tg0 unit 0: SEAGATE ST31200N SUN1.05 8564, 2061108 512 byte blocks
sd0: <SUN1.05 cyl 2036 alt 2 hd 14 sec 72>
tg1 at esp0 target 5
unit 0 at tg1 (tape (removable) qual=0x0 version=<iso 2, ecma 0, ansi 0>) 
not configured
tg2 at esp0 target 6
sd1 at tg2 unit 0: TOSHIBA CD-ROM XM-3401TA 1094, 655960 512 byte blocks
sd1: <CD-ROM Disc for SunOS Installation cyl 2048 alt 0 hd 1 sec 640>
le0 at sbus0 slot 0 offset 0xc00000 pri 5: hardware address 
08:00:20:0c:33:6a
cgsix0 at sbus0 slot 3 offset 0x0: SUNW,501-1672, 1152 x 900, rev 5
fd at mainbus0 ioaddr 0xf7200000 not configured
Found boot device sd0

note the:

unit 0 at tg1 (tape (removable) qual=0x0 version=<iso 2, ecma 0, ansi 0>) 
not configured
fd at mainbus0 ioaddr 0xf7200000 not configured


	Is the tg* device the tape drive? How do I get tg and fd devices
configured? I am running NetBSD-1.0/SPARC on a Sun IPX with Weitek.

	Any help would be much appreciated...


Thank you.