On Fri, 16 Feb 1996 23:54:35 +0100 (MET) 
 Peter Svensson <petersv@df.lth.se> wrote:

 > > 	While I can't offer an answer for your first question, I am
 > > using a cgtwo on my 4/260... it has worked since just before 1.1.
 > 
 > Sorry, my question was not very well put. What I ment was: will NetBSD 
 > work with two framebuffers intalled? The one on the cpu card is really an 
 > integral part of the cpu card.

If your first framebuffer is not recognized by the system, NetBSD 1.1 
should cope with the cgtwo just fine.  If the on-cpu framebuffer _is_ 
recognized by the system, then under 1.1 (stock), you're likely to get a 
"multiple /dev/fb" panic.  I recently pulled changes from -current into 
1.1 for patch2 which fix this problem.

So, to re-cap: if your on-cpu framebuffer isn't currently recognized, the 
cgtwo should be OK.

--------------------------------------------------------------------------
Jason R. Thorpe                                       thorpej@nas.nasa.gov
NASA Ames Research Center                               Home: 408.866.1912
NAS: M/S 258-6                                          Work: 415.604.0935
Moffett Field, CA 94035                                Pager: 415.428.6939