You (Paul Kranenburg) wrote:
> I still like to find out why the kernel crashes if you don't do that.
> Can you send me the probe messages of the successful startup?

You know that the SPARCclassic X has disabled the SCSI controller? "test
scsi" or "probe-scsi-all" at the OK prompt generated no output. After
patching the PROM into a SPARCclassic the controller and my harddisk was
recognized.

Which dmesg output do you want? The one from the 1.3.2-kernel with the
SPARCclassic X or the one from my current kernel (Oct 24 sources) with the
SPARCclassic?

If I remember correctly, the 1.3.2-kernel said something like "expected 
interrupt 1, got 0" when probing esp0, but it didn't panic. But I don't
really want to patch the prom back to a SPARCclassic X to verify this ;)

The current kernel with the SPARCclassic reports the following:

NetBSD 1.3H (NETBSD13H) #0: Tue Oct 27 20:20:46 PST 1998
    elchy@xnetbsd.tlk.com:/usr/src/sys/arch/sparc/compile/NETBSD13H
real mem = 100347904
avail mem = 91017216
using 1224 buffers containing 5013504 bytes of memory
bootpath: /iommu@0,10000000/sbus@0,10001000/ledma@4,8400010/le@4,8c00000
mainbus0 (root): SUNW,SPARCclassic
cpu0 at mainbus0: TMS390S10 @ 50 MHz, on-chip FPU
cpu0: physical 4K instruction (32 b/l), 2K data (16 b/l): cache enabled
obio0 at mainbus0
clock0 at obio0 slot 0 offset 0x200000: mk48t08 (eeprom)
timer0 at obio0 slot 0 offset 0xd00000 delay constant 23
zs0 at obio0 slot 0 offset 0x100000 level 12 softpri 6
zstty0 at zs0 channel 0
zstty1 at zs0 channel 1
zs1 at obio0 slot 0 offset 0x0 level 12 softpri 6
kbd0 at zs1 channel 0 (console)
ms0 at zs1 channel 1
slavioconfig at obio0 slot 0 offset 0x800000 not configured
auxreg0 at obio0 slot 0 offset 0x900000
power0 at obio0 slot 0 offset 0x910000 level 2
fdc0 at obio0 slot 0 offset 0x400000 level 11 softpri 4: chip 82077
iommu0 at mainbus0 addr 0x10000000: version 0x1/0x4, page-size 4096, range 64MB
sbus0 at iommu0: clock = 25 MHz
dma0 at sbus0 slot 4 offset 0x8400000: rev 2
esp0 at dma0 slot 4 offset 0x8800000 level 4: ESP200, 40MHz, SCSI ID 7
scsibus0 at esp0: 8 targets
probe(esp0:0:0): max sync rate 10.00Mb/s
sd0 at scsibus0 targ 0 lun 0: <IBM, DDRS-34560, S97B> SCSI2 0/direct fixed
sd0: 4357MB, 8387 cyl, 5 head, 212 sec, 512 bytes/sect x 8925000 sectors
audioamd0 at sbus0 slot 4 offset 0x1300000 level 7 (ipl 13) softpri 4
audio0 at audioamd0
SUNW,bpp at sbus0 slot 4 offset 0xc800000 level 2 (ipl 3) not configured
ledma0 at sbus0 slot 4 offset 0x8400010: rev 2
le0 at ledma0 slot 4 offset 0x8c00000 level 6: address 08:00:20:19:bf:52
le0: 8 receive buffers, 2 transmit buffers
cgthree0 at sbus0 slot 3 offset 0x0 level 9: , 1152 x 900 (console)
cgthree0: attached to /dev/fb
nfs_boot: trying RARP (and RPC/bootparam)
nfs_boot: client_addr=0xc261543b
nfs_boot: server_addr=0xc2615419
nfs_boot: hostname=xnetbsd
root on 194.97.84.25:/scratch/NetBSD
root file system type: nfs

Bye, Elchy

-- 
 Andreas Eltrich  ( ( )    ( ) )  Mail: elchy@dahoam.de
 Munich, Germany  `-^-^-@@-^-^-'  http://www.dahoam.de/
 Tel: +49-89-54379757  (..)  Fax/Modem: +49-89-54379758