Subject: Re: Another Problem. sigh.
To: None <qball@darkphiber.org>
From: Mats Sandstrom <tober@sdf.se>
List: port-sparc
Date: 06/07/1999 15:05:33
On Sun, 6 Jun 1999 qball@darkphiber.org wrote:
> it's me bugging everyone again, this is probably my fualt too but I can't
> figure it out.
>
> In the install howto it says that size and offset should be divisable by the
> number of sectors in a cylinder, I did this when partioning with disklabel.
>
> After installing and tring to boot from teh local hdd on the sparc station
> (sun4c) I get the following panic msg.
>
> panic: alignment fault
>
> and the boot aborts.
>
> here is my partion info as reported by `disklabel -i sd0`
>
> TYPE: SCSI
> DISK: DSP3107LS
> LABEL: DEC-DSP3107LS-44
> FLAGS:
> BYTES/SECTOR: 512
> SECTORS/TRACK: 83
> TRACKS/CYLINDER: 8
> SECTORS/CYLINDER: 664
> CYLINDERS: 3115
> TOTAL SECTORS: 2068360
> RPM: 5400
> INTERLEAVE: 1
> TRACKSKEW: 0
> CYLINDERSKEW: 0
> HEADSWITCH: 0
> TRACK-TO-TRACK SEEK: 0
> DRIVE DATA: 0
>
> 8 partitions:
> # size offset fstype {fsize bsize cpg}
>
> a 71712 0 4.2BSD 1024 8192 16 {Cyl. 0 - 107}
> b 258296 71712 swap {Cyl. 108 - 496}
> c 1024552 330008 4.2BSD 1024 8192 16 {Cyl. 497 - 2039}
> d 610880 1354560 4.2BSD 1024 8192 16 {Cyl. 2040 - 2959}
> e 102920 1965440 4.2BSD 1024 8192 16 {Cyl. 2960 - 3114}
>
>
Partion c should reflect the whole disk and be type 'unknown'.
So it should look something like this..
8 partitions:
# size offset fstype {fsize bsize cpg}
a 71712 0 4.2BSD 1024 8192 16 {Cyl. 0 - 107}
b 258296 71712 swap {Cyl. 108 - 496}
c 2068360 0 unknown {Cyl. 0 - 3114}
d 1024552 330008 4.2BSD 1024 8192 16 {Cyl. 497 - 2039}
e 610880 1354560 4.2BSD 1024 8192 16 {Cyl. 2040 - 2959}
f 102920 1965440 4.2BSD 1024 8192 16 {Cyl. 2960 - 3114}
/Mats
--
tober@sdf.se (Mats Sandstrom)
Wich one will loose - Depends on what I choose
Or maybe which voice I ignore -Niel Peart, RUSH
The problem with people today, is that everyone
seems to be three drinks behind!