Subject: Re: Ross question
To: Herb Peyerl <hpeyerl@beer.org>
From: Brian Buhrow <buhrow@lothlorien.nfbcal.org>
List: port-sparc
Date: 01/10/2000 16:54:45
On the systems I've worked with, Sparc 10 and 20 machines, there was a
jumper located under the MBUS modules which was either set to 40 or 50.
-Brian
On Jan 10, 4:55pm, Herb Peyerl wrote:
} Subject: Re: Ross question
} buhrow@lothlorien.nfbcal.org (Brian Buhrow) wrote:
} > I think the versions we upgraded to in the Sparc 10 and 20 machines
} > we converted were R2.25 and higher. Lower numbers, like 2.15, didn't cut
} > it.
}
} just checked:
}
} SPARCsystem 600MP Series (2 X CY605B), No Keyboard
} ROM Rev. 2.5, 128 MB memory installed, Serial #4197491.
} Ethernet address 8:0:20:f:44:95, Host ID: 71400c73.
}
} how do you configure the mbus speed?
>-- End of excerpt from Herb Peyerl