Subject: Re: SS2 w/ Power uP
To: None <port-sparc@netbsd.org>
From: Josh Davidson <dogtoy@ductape.net>
List: port-sparc
Date: 09/02/2000 15:22:25
I guess it was because i had them on the subnet. The linux I read documentation
said something about specifying hw to ifconfig to give le1 a seperate mac
address. If I did this, could I have them on the same network? Is there
something similar to ifconfig le1 hw xxx:xxx:xxx:xxx on netbsd or openbsd?
Thanks,
Josh
Quoting Michael Wolfson <mw@costello.cnf.cornell.edu>:
> At 10:13 PM -0500 9/1/00, you wrote:
>
> :)Is there some kind special ifconfig command I need to use to configure
> :two le
> :)cards? Right now, I can only get one at a time to work.
>
> Just "ifconfig le0 whatever" and "ifconfig le1 whatever", or make a
> /etc/ifconfig.le1 with the correct settings (which will be set when it
> reboots).
>
> Everything should "just work" as long as you don't have both ethernet cards
> on the same subnet.
>
> -- MW
>
>
>
/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-
Josh Davidson ** ** **** ** ****** ** **
Sys/Net Admin ** ** ** ** ** ** ****
PHAT Beach Records ** ** ** ** ** ** ** **
****** ** **** ****** ** **
/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-