In article <CF31D36E39@fs2.scg.man.ac.uk>,
Peter W Waterland <mmmckpww@stud.man.ac.uk> wrote:
>
>'probe-scsi' at the openboot version 2 prom does 
>this:
>target 5

Notice that it says target 5.


>boot device: /sbus/esp@0,800000/sd@3,0 	 file 
>and args: bsd
>scsi device 3,0 is not responding 
>cant open boot device.

And you trying to boot target 3

Either:

	re-jumper your drive to scsi id 3.
	The jumpers in the back of the drive look like:
	:|:| [101 == 5] and they should look like ::|| [11 == 3]

Or at the ok prompt type:

	boot disk5

    if that does not work [you have an ancient prom]

	boot /sbus/esp@0,800000/sd@5,0

    to make the change permanent

	setenv boot-device disk5

    or

	setenv boot-device /sbus/esp@0,800000/sd@5,0

    whichever worked above.

christos