Ken Wellsch <kwellsch@tampabay.rr.com> wrote:
>On Fri, Sep 28, 2001 at 12:52:42PM -0400, Michael Thompson wrote:
>> 
>> I have 4/100, 4/200, 4/300, 4/400, and 4/600 CPUs.
>> I will see if any of them behave.
>
>I booted the 1.5 CD on a 4/600 and I ran a copy of -current
>circa a month or so ago on the same 4/600 box.  As the 600
>is so similar to a SparcStation (esp, le devices, mbus CPUs)
>I don't know that it is much of a test though.
>
>-- Ken

I've just got a sun-4/110 to play with and I'm trying to get NetBSD
netbooting on it. I followed all the instructions for setting this up
for 1.5.2 and this is what I get:

EEPROM:  Using RS232 Port A as input device.
Selftest Completed.

Sun Workstation, Model Sun-4/100 Series.  
ROM Rev 3.0.2, 8MB memory installed, Serial #4177.
Ethernet address 8:0:20:0:64:E, Host ID 22001051.

Testing 8 Megabytes of Memory ... Completed.

Auto-boot in progress...
Using IP Address 192.168.8.2 = C0A80802
Boot: ie(0,0,0) 
Booting from tftp server at 192.168.8.1 = C0A80801
Downloaded 62216 bytes from tftp server.

>> NetBSD/sparc Secondary Boot, Revision 1.9
>> (toor@proxima, Tue Aug 21 23:18:13 CST 2001)
Booting netbsd
Using IP Address 192.168.8.2 = C0A80802
Using BOOTPARAMS protocol: ip address: 192.168.8.2, hostname: Audumla
root addr=192.168.8.1 path=/usr/export/Audumla/root
2407018+115748+235192 [68+154160+112699]=0x2f29c0
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.5.2 (GENERIC) #0: Wed Aug 22 04:33:09 CST 2001
    toor@proxima:/usr/src/sys/arch/sparc/compile/GENERIC
total memory = 8168 KB
avail memory = 4704 KB
using 63 buffers containing 504 KB of memory
bootpath: /obio0/ie0
mainbus0 (root): SUN-4/100 series
cpu0 at mainbus0: MB86900/1A or L64801 @ 14.280 MHz, MB86910 or
WTL1164/5 FPU
cpu0: no cache
obio0 at mainbus0
ie0 at obio0 addr 0x6000000 level 6 address 08:00:20:00:64:0e, type
onboard
oclock0 at obio0 addr 0x3000000 delay constant 4
eeprom0 at obio0 addr 0x2000000
memreg0 at obio0 addr 0x4000000
zs0 at obio0 addr 0x1000000 level 12 softpri 6
zstty0 at zs0 channel 0 (console i/o)
zstty1 at zs0 channel 1
zs1 at obio0 addr 0x0 level 12 softpri 6
kbd0 at zs1 channel 0
ms0 at zs1 channel 1
bwtwo0 at obio0 addr 0xb300000 level 4: bwtwo/p4, 1152 x 900
bwtwo0: cgfour overlay plane
bwtwo0: attached to /dev/fb
cgfour0 at obio0 addr 0xb300000 level 4: cgfour/p4, 1152 x 900
cgfour0: replacing bwtwo0
cgfour0: attached to /dev/fb
sw0 at obio0 addr 0xa000000 level 3 pri 3
sw0: options=1<DMA>
scsibus0 at sw0: 8 targets, 8 luns per target
sparcvme0 at mainbus0
vme0 at sparcvme0

And that's all I get. So I go searching around for some help and I
found this list and a few people haveing problems like mine. I want to
know if there has been any progress on this issue and what I can do to
help it along.

Thanks

=====
************************************************************
This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you are not the intended recipient or the person responsible for delivering to the intended recipient, be advised that you have received this email in error and that any use of the information contained within this email or attachments is strictly prohibited.
************************************************************

__________________________________________________
Do You Yahoo!?
Send your FREE holiday greetings online!
http://greetings.yahoo.com