Subject: Re: <#2> ok
To: None <port-sparc@netbsd.org>
From: Ray Phillips <r.phillips@jkmrc.uq.edu.au>
List: port-sparc
Date: 05/10/2002 15:41:47
I tried space bar pressed on the SS10 keyboard (a key I hadn't tried
before) and this was displayed on the console:
data fault: pc=0xf01d53bc addr=0x0 sfsr=1a6<PERR=0,LVL=1,AT=5,FT=1,FAV,O>
panic: kernel fault
syncing disks... data fault: pc=0xf01d53bc addr=0x0
sfsr=1a6<PERR=0,LVL=1,AT=5,>
panic: kernel fault
Frame pointer is at 0xf0262cb0
Call traceback:
pc = 0xf01f8624 args = (0x1e000fe7, 0x1e000fe7, 0xf00, 0x0,
0xf0262dc8, 0x1e8
pc = 0xf0060dc8 args = (0x104, 0x0, 0xf029a400, 0x0, 0xf0262e3c,
0x1e9000e0,0
pc = 0xf0206354 args = (0xf024ceb8, 0x104, 0x0, 0xf0262e48, 0x1e,
0x1, 0xf028
pc = 0xf0008518 args = (0x0, 0x1a6, 0x0, 0xf0262ef0, 0xf0263360,
0x1e9000e2,0
pc = 0xf0083570 args = (0x1, 0x79, 0x1, 0x0, 0x1, 0x0, 0xf0262f40)
fp = 0xf00
pc = 0xf01d47a0 args = (0xf0cdcc00, 0x79, 0x1, 0x7907, 0x79,
0x1e9000e4, 0xf8
pc = 0xf01c0d58 args = (0xf0ccda68, 0xf02739b4, 0xf01d46c8, 0x0,
0xf02634ac,0
dumping to dev 7,1 offset 967
dump
then the machine froze and I had to power cycle it. It began to boot
normally, but stopped near the end. The final lines printed to the
console were:
Configuring network interfaces: le0.
add net default: gateway 130.102.20.30
Adding interface aliases:
Building databases...
Starting syslogd.
Checking for core dump...
savecore: reboot after panic: kernel fault
savecore: system went down at Fri May 10 14:02:05 2002
savecore: writing compressed core to /var/crash/netbsd.1.core.Z
May 10 14:18:10 ap0 savecore: reboot after panic: kernel fault
452004K
The number on the last line changed continuously, seemingly at
random, until I power cycled the SS10 again, whereupon it got to the
same point in the boot process and stuck in the same way. I guess
I'll have to boot from a CD-R and replace the kernel?
I didn't mention in my previous message that I have been able to
start X from the serial console and use the SS10's keyboard and mouse
for the X session without any trouble in the past. I was going to
see if I could do it today too, but then it stopped booting.
Ray