On Mon, Sep 22, 2003 at 12:17:23PM -0400, Mauricio wrote:
> >Your best bet is to use a single
> >DHCP server, so you really should disable the DHCP on your router and do
> >everything in one place.
> 
> 	Done!  After that I finally was able to start the 
> installation process.  However, after it downloaded all the binary 
> distribution sets, it gave the following (SCSI?) error:
> 
> sd0(esp0:0:3:Failed: command failedn CDB: 0x28 00 00 20 5b 80 00 00 10 00
>     SENSE KEY:  Media Errorf /mnt/usr/INSTALL/kern-GENERIC.tgz
>    INPress any key to continue
>      ASC/ASCQ:  Unrecovered Read 
> Error------------------------------------------
>          SKSV:  Actual Retry Count: 16
> 
> gzip: stdin: Input/output error
> pax: End of archive volume 1 reached
> pax: Sorry, unable to determine archive format.
> 
> (when I tried to let it continue):
> 
> sd0(esp0:0:3:0):  Check Condition on CDB: 0x28 00 00 20 72 a0 00 00 10 00
>     SENSE KEY:  Media Error
>    INFO FIELD:  2126497
>      ASC/ASCQ:  Unrecovered Read Error
>          SKSV:  Actual Retry Count: 16
> 
> What is it trying to tell me?  I do apologize for the garble but I 
> had the terminal set to vt100.

Your drive has some bad blocks.
If the INFO FIELD is always the same (or shows a limited number of sector)
you can try to remap them (scsictl sd0 remap 2126497), if there's a lot of
them you'd probably better change your disk.

-- 
Manuel Bouyer <bouyer@antioche.eu.org>
     NetBSD: 24 ans d'experience feront toujours la difference
--