Hi all, 

discovering that 'e250's are supported, I'm experimenting
with installing netbsd on an e250 which isn't ready to 
be deployed yet. I chose to use the latest snaphost, 
(ftp://ftp.netbsd.org/pub/NetBSD/arch/sparc64/snapshot/20000814/)
for the binaries, but used the diskless boot procedure
(rarpd+tfpd(for ofwboot)+bootparamd+nfsd) and got a
"Fast Data Access MMU Miss" error after loading the kernel.

Mailing list comments suggests that this indicates the hardware
isn't supported. The log of the boot follows. comments? 

thanks 
Mark
************
Keyboard not present.  Using ttya for input and output.


Sun (TM) Enterprise 250 (UltraSPARC-II 296MHz), No Keyboard
OpenBoot 3.16, 1024 MB memory installed, Serial #13619721.
Ethernet address 8:0:20:cf:d2:9, Host ID: 80cfd209.



Rebooting with command: boot net                                      
Boot device: /pci@1f,4000/network@1,1  File and args: 
15400 >> NetBSD/sparc64 OpenFirmware Boot, Revision 
>> (mrg@powerofseven.eterna.com.au, Sat Aug 19 02:35:03 EST 2000)
Using BOOTPARAMS protocol: ip address: 192.168.1.162, hostname: w02.test.net
root addr=192.168.1.156 path=/export/w02.test.net/root
loadfile: reading header
elf64_exec: Booting /pci@1f,4000/network@1,1/netbsd
3021759@0xf1000000+221136@0xf1400000+433608@0xf1435fd0 
symbols @ 0xfefa6300 74+242448+125126 start=0xf1000000
chain: calling OF_chain(800000, ef18, f1000000, fff89a80, 18)
[ using 368424 bytes of netbsd ELF symbol table ]
Fast Data Access MMU Miss                        
ok 
***********************