Can you build and try -current with the latest ncr53c9x.c and ncr53c9xvar.h?

	Andrey

On Mon, Aug 26, 2002 at 09:13:35AM +0200, Sten wrote:
> On Sun, 25 Aug 2002, Andrey Petrov wrote:
> 
> > I suspect that your drive start negotiating sync/wide mode
> > first and this is not supported by esp driver. If you can
> > set ncr53c9x_debug to 0x3ff during boot and send a log it
> > should show if this is a case. To do that you need to boot with -d
> > flag
> 
> <snip>
> 
> > The log is supposed to be large so you'll better off with serial console
> > which let you grab it.
> >
> 
> I was already using a serial console, I'll try this when I get home.
> 
> -- 
> Sten Spans
> 
>   "Life is pretty ok when you have
>    too many suns to play with"
>