All,

I'm attempting to install NetBSD 1.6 on my sun Ultra 1 Enterprise system. 
It starts the boot process, but hangs immediately after reading my Quad 
ethernet card. I've attached a log for you :

I'm trying to figure out what I need to do to resolve this... I noted from 
the archives that there have been a lot of problems with the QEC card.. 
This one is working in solaris 2.5 (which is what's on the box). Can anyone 
provide a few pointers?

Thanks,
Steve



Hardware Power ON
Button Power ON
Button Power ON

@(#) Sun Ultra 1 SBus  3.1 Version 1 created 1996/03/08 14:41
Probing keyboard Done
%o0 = 0000.0000.0000.4001

Executing Power On SelfTest



Power On Selftest Completed
     Status  = 0000.0000.0000.0001 ffff.ffff.f006.e6b8 fcff.ffff.ffff.fffc

Software Power ON

@(#) Sun Ultra 1 SBus  3.1 Version 1 created 1996/03/08 14:41
Clearing E$ Tags Done
Clearing I/D TLBs Done
Probing Memory Done
MEM BASE = 0000.0000.0000.0000
MEM SIZE = 0000.0000.0400.0000
MMUs ON
Copy Done
PC = 0000.01ff.f000.1acc
PC = 0000.0000.0000.1b10
Decompressing into Memory Done
Size = 0000.0000.0006.c140
ttya initialized
SC Control: EWP:0 IAP:0 FATAL:0 WAKEUP:0 BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0
Probing Memory Bank #0  32 +  32 :  64 Megabytes
Probing Memory Bank #1   0 +   0 :   0 Megabytes
Probing Memory Bank #2   0 +   0 :   0 Megabytes
Probing Memory Bank #3   0 +   0 :   0 Megabytes
Probing /sbus@1f,0 at 0,0  qec qe qe qe qe
Probing /sbus@1f,0 at 1,0  Nothing there
Probing /sbus@1f,0 at 2,0  Nothing there
screen not found.
SC Control: EWP:0 IAP:0 FATAL:0 WAKEUP:0 BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0
Probing Memory Bank #0  32 +  32 :  64 Megabytes
Probing Memory Bank #1   0 +   0 :   0 Megabytes
Probing Memory Bank #2   0 +   0 :   0 Megabytes
Probing Memory Bank #3   0 +   0 :   0 Megabytes
Probing /sbus@1f,0 at 0,0  qec qe qe qe qe
Probing /sbus@1f,0 at 1,0  Nothing there
Probing /sbus@1f,0 at 2,0  Nothing there

Sun Ultra 1 SBus (UltraSPARC 167MHz), No Keyboard
OpenBoot 3.1, 64 MB memory installed, Serial #16777215.
Ethernet address ff:ff:ff:ff:ff:ff, Host ID: fcffffff.


The IDPROM contents are invalid
Power On Self Test Failed.  Cause:
ok boot cdrom -s -v
Boot device: /sbus/espdma@e,8400000/esp@e,8800000/sd@6,0:f  File and args: 
-s -v
NetBSD IEEE 1275 Bootblock
..>> NetBSD/sparc64 OpenFirmware Boot, Revision 1.5
 >> (autobuild@cs20.apochromatic.org, Sun Sep  8 11:34:12 UTC 2002)
devopen: getdisklabel sez no disk label
devopen: search_label sez no disk label
loadfile: reading header
elf64_exec: Booting /sbus@1f,0/espdma@e,8400000/esp@e,8800000/sd@6,0:f/netbsd
4548728@0x1000000+5400456@0x1800000+2988152@0x1d26788 symbols @ 0xfff66280 
74 start=0x1000000
chain: calling OF_chain(800000, e478, 1000000, fffb3a80, 18)
[ netbsd ELF symbol table not valid ]

[ no symbol table formats found ]

Kernel size exceeds 4MB
consinit()
setting up stdin
chosen = f002c840, stdin @ 0x181a7f0
stdin instance = fffe8450
stdin node = f005a984
setting up stdout
stdout instance = fffe8810
stdout package = f005a984
buffer @ 0x2009d90
console is /sbus@1f,0/zs@f,1100000:a

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002

     The NetBSD Foundation, Inc.  All rights reserved.

Copyright (c) 1982, 1986, 1989, 1991, 1993

     The Regents of the University of California.  All rights reserved.


NetBSD 1.6 (INSTALL) #0: Sun Sep  8 12:08:38 UTC 2002

     autobuild@cs20.apochromatic.org:/autobuilder/build/sparc64/OBJ/autobuilder/build/src/sys/arch/sparc64/compile/INSTALL

total memory = 65536 KB

avail memory = 47128 KB

using 422 buffers containing 3376 KB of memory

bootpath: /sbus@1f,0/espdma@e,8400000/esp@e,8800000/sd@6,0:f

unknown option ` '

unknown option `-'

mainbus0 (root): SUNW,Ultra-1

cpu0 at mainbus0: SUNW,UltraSPARC @ 167 MHz, versio (32 b/l), 512K external 
(64 b/l)

timer0 at mainbus0 addr 0xfffc3c00 irq vectors 7f0 and 7f1

sbus0 at mainbus0 addr 0xfffcc000: clock = 25 MHz

DVMA map: ff800000 to ffffe000

IOTSB: 4d8000 to 4da000

audiocs0 at sbus0 slot 13 offset 0xc000000 vector 24 ipl 13: CS4231A

audio0 at audiocs0: full duplex

auxio0 at sbus0 slot 15 offset 0x1900000

flashprom at sbus0 slot 15 offset 0x0 not configured

SUNW,fdtwo at sbus0 slot 15 offset 0x1400000 vector 29 ipl 11 not configured

clock0 at sbus0 slot 15 offset 0x1200000: mk48t59: hostid fcffffff

zs0 at sbus0 slot 15 offset 0x1100000 vector 28 ipl 12 softpri 6

zstty0 at zs0 channel 0 (console i/o)

zstty1 at zs0 channel 1

zs1 at sbus0 slot 15 offset 0x1000000 vector 28 ipl 12 softpri 6

zstty2 at zs1 channel 0

kbd0 at zstty2

zstty3 at zs1 channel 1

ms0 at zstty3

intr_establish: intr reused 7e8

sc at sbus0 slot 15 offset 0x1300000 not configured

SUNW,pll at sbus0 slot 15 offset 0x1304000 not configured

dma0 at sbus0 slot 14 offset 0x8400000: dma rev 2

esp0 at dma0 slot 14 offset 0x8800000 vector 20 ipl 3: ESP200, 40MHz, SCSI ID 7

scsibus0 at esp0: 8 targets, 8 luns per target

ledma0 at sbus0 slot 14 offset 0x8400010: dma rev 2

le0 at ledma0 slot 14 offset 0x8c00000 vector 21 ipl 6: address 
ff:ff:ff:ff:ff:ff

le0: 8 receive buffers, 2 transmit buffers

bpp0 at sbus0 slot 14 offset 0xc800000 vector 22 ipl 2: dma rev 2

bpp: hcr 0 ocr 200a tcr 8 or 0

qec0 at sbus0 slot 0 offset 0x20000 vector 4 ipl 2: 128K memory

qe0 at qec0 slot 0 offset 0x0 rev 1 address ff:ff:ff:ff:ff:ff

qe1 at qec0 slot 1 offset 0x0 rev 1intr_establish: intr reused 7c4

  address ff:ff:ff:ff:ff:ff

qe2 at qec0 slot 2 offset 0x0 rev 1intr_establish: intr reused 7c4

  address ff:ff:ff:ff:ff:ff

qe3 at qec0 slot 3 offset 0x0 rev 1intr_establish: intr reused 7c4