On Mon, Jun 13, 2005 at 11:28:51AM -0700, Andrey Petrov wrote:
> On Fri, Jun 10, 2005 at 09:23:49AM +0200, franceschini_a@tiscali.it wrote:
> > Hi All,
> > 	
> > 	I'm trying to install NetBSD on a SunBlade150 workstation.
> > 
> > 	I tried many different versions up to 2.0.2.
> > 
> > 	I tried netbooting, booting from cd, but any attempt
> > 	has failed.
> > 
> > 	They all stop  when it comes to mount root filesystem.
> > 
> > 	Netboot become deaf to bootparam reply (thus not mounting NFS),
> > 	 while cd simply hangs.
> > 	
> > 	This is the output of my last attempt:
> > 
> 
> Yeah, I see that too. We don't do something with PCI controller so there are
> no interrupts delivered either for ide or gem.
> 
> --Andrey


I don't if it may help but anyway... I tried to install OpenBSD 3.6 on the same (phisically) machine
ed it worked.

 console is keyboard/display
 Copyright (c) 1982, 1986, 1989, 1991, 1993
         The Regents of the University of California.  All rights reserved.
 Copyright (c) 1995-2004 OpenBSD. All rights reserved.  http://www.OpenBSD.org
 Copyright (c) 1995-2004 OpenBSD. All rights reserved.  http://www.OpenBSD.org
 OpenBSD 3.6 (GENERIC) #304: Fri Sep 17 13:01:33 MDT 2004
     deraadt@sparc64.openbsd.org:/usr/src/sys/arch/sparc64/compile/GENERIC
 total memory = 536870912
 avail memory = 479182848
 using 3276 buffers containing 26836992 bytes of memory
 bootpath: /pci@1f,0/ide@d,0/disk@0,0
 mainbus0 (root): Sun Blade 150 (UltraSPARC-IIe 650MHz)
 cpu0 at mainbus0: SUNW,UltraSPARC-IIe @ 650 MHz, version 0 FPU
 cpu0: physical 32K instruction (32 b/l), 16K data (32 b/l), 2048K external (64 b/l)
 psycho0 at mainbus0
 pci108e,a001: impl 0, version 0: ign 7c0 bus range 0 to 1; PCI bus 0
 DVMA map: c0000000 to e0000000
 IOTDB: 2716000 to 2796000
 pci0 at psycho0
 ebus0 at pci0 dev 12 function 0 "Sun PCIO Ebus2 (US III)" rev 0x01
 flashprom at ebus0 addr 0-fffff not configured
 clock0 at ebus0 addr 0-1fff: mk48t59: hostid 83b073e6
 ebus_attach: idprom: incomplete
 gem0 at pci0 dev 12 function 1 "Sun ERI Ether" rev 0x01: ivec 3006, address 00:03:ba:b0:73:e6
 ukphy0 at gem0 phy 1: Generic IEEE 802.3u media interface
 ukphy0: OUI 0x001018, model 0x001e, rev. 4
 "Sun FireWire" rev 0x01 at pci0 dev 12 function 2 not configured
 ohci0 at pci0 dev 12 function 3 "Sun USB" rev 0x01: ivec 24, version 1.0, legacy support
 usb0 at ohci0: USB revision 1.0
 uhub0 at usb0
 uhub0: Sun OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 4 ports with 4 removable, self powered
 uhidev0 at uhub0 port 2 configuration 1 interface 0
 uhidev0: Sun Microsystems Type 6, rev 1.10/2.00, addr 2, iclass 3/1
 ukbd0 at uhidev0: 8 modifier keys, 6 key codes
 wskbd0 at ukbd0 (mux 1 ignored for console): console keyboard
 uhidev1 at uhub0 port 4 configuration 1 interface 0
 uhidev1: Sun Microsystems Type 6, rev 1.10/1.05, addr 3, iclass 3/1
 ums0 at uhidev1: 3 buttons
 wsmouse0 at ums0
 ebus1 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00
 dma at ebus1 addr 0-ffff ipl 42 not configured
 power at ebus1 addr 800-82f ipl 32 not configured
 com0 at ebus1 addr 3f8-3ff ipl 43: ns16550a, 16 byte fifo
 com1 at ebus1 addr 2e8-2ef ipl 43: ns16550a, 16 byte fifo
 "Acer Labs M7101 Power Mgmt" rev 0x00 at pci0 dev 3 function 0 not configured
 autri0 at pci0 dev 8 function 0 "Acer Labs M5451 Audio" rev 0x01: ivec 23
 ac97: codec id 0x41445348 (Analog Devices AD1881A)
 ac97: codec features headphone, Analog Devices Phat Stereo
 audio0 at autri0
 midi0 at autri0: <4DWAVE MIDI UART>
 pciide0 at pci0 dev 13 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc3: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
 pciide0: using ivec 180c for native-PCI interrupt
 wd0 at pciide0 channel 0 drive 0: <ST380011A>
 wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
 atapiscsi0 at pciide0 channel 0 drive 1
 scsibus0 at atapiscsi0: 2 targets
 cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-ROM SR-8589, 8Z14> SCSI0 5/cdrom removable
 wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
 cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 4
 pciide0: channel 1 disabled (no drives)
 ppb0 at pci0 dev 5 function 0 "Intel S21152BB PCI-PCI" rev 0x00
 pci1 at ppb0 bus 1
 vgafb0 at pci0 dev 19 function 0 "ATI Rage XL" rev 0x27
 wsdisplay0 at vgafb0: console (std, sun emulation), using wskbd0
 pcons at mainbus0 not configured
 No counter-timer -- using %tick at 650MHz as system clock.
 root on wd0a
 rootdev=0xc00 rrootdev=0x1a00 rawdev=0x1a02


Hope it helps

Bye