Re: mt status && LTO1

[Greg Troxel <gdt%ir.bbn.com@localhost>]

It works ok for me on netbsd-4, i386, Quantum LTO2.
And on netbsd-4, sparc64, DDS3.

i386:

st0 at scsibus1 target 5 lun 0: <CERTANCE, ULTRIUM 2, 1914> tape removable
st0: density code 66, 512-byte blocks, write-enabled
st0: sync (12.50ns offset 127), 16-bit (160.000MB/s) transfers

[run amcheck]

foo root 7 /usr/home/gdt #> mt status
SCSI tape drive, residual=0
ds=3<Mounted>
er=0
blocksize: 0 (0, 0, 0, 0)
density: 66 (0, 0, 0, 0)
current file number: 0
current block number: 1
foo root 8 /usr/home/gdt #> mt fsf 1
foo root 9 /usr/home/gdt #> mt status
SCSI tape drive, residual=0
ds=3<Mounted>
er=0
blocksize: 0 (0, 0, 0, 0)
density: 66 (0, 0, 0, 0)
current file number: 1
current block number: 0
foo root 10 /usr/home/gdt #> mt fsf 1
foo root 11 /usr/home/gdt #> mt status
SCSI tape drive, residual=0
ds=3<Mounted>
er=0
blocksize: 0 (0, 0, 0, 0)
density: 66 (0, 0, 0, 0)
current file number: 2
current block number: 0
foo root 12 /usr/home/gdt #> mt fsf 2
foo root 13 /usr/home/gdt #> mt status
SCSI tape drive, residual=0
ds=3<Mounted>
er=0
blocksize: 0 (0, 0, 0, 0)
density: 66 (0, 0, 0, 0)
current file number: 4
current block number: 0
foo root 14 /usr/home/gdt #> mt fsf 5
foo root 15 /usr/home/gdt #> mt status
SCSI tape drive, residual=0
ds=3<Mounted>
er=0
blocksize: 0 (0, 0, 0, 0)
density: 66 (0, 0, 0, 0)
current file number: 9
current block number: 0


sparc64:

st0 at scsibus0 target 4 lun 0: <HP, C1533A, A612> tape removable
st0: drive empty
st0: sync (100.00ns offset 16), 8-bit (10.000MB/s) transfers

bar root 1 /usr/home/gdt #> mt rewind
bar root 2 /usr/home/gdt #> mt statua
mt: statua: unknown command
bar root 3 /usr/home/gdt #> mt status
SCSI tape drive, residual=0
ds=3<Mounted>
er=0
blocksize: 0 (0, 0, 0, 0)
density: 36 (0, 0, 0, 0)
current file number: 0
current block number: 0
bar root 4 /usr/home/gdt #> mt fsf 1
bar root 5 /usr/home/gdt #> mt status
SCSI tape drive, residual=0
ds=3<Mounted>
er=0
blocksize: 0 (0, 0, 0, 0)
density: 36 (0, 0, 0, 0)
current file number: 1
current block number: 0
bar root 6 /usr/home/gdt #> mt fsf 2
mt status
bar root 7 /usr/home/gdt #> mt status
SCSI tape drive, residual=0
ds=3<Mounted>
er=0
blocksize: 0 (0, 0, 0, 0)
density: 36 (0, 0, 0, 0)
current file number: 3
current block number: 0