Re: NetBSD installation on Sun Ultra 10

[Connor McLaughlan <cont6pro3%gmail.com@localhost>]

On Sun, Jul 26, 2020 at 7:15 PM Michael <macallan%netbsd.org@localhost> wrote:
>
> Hello,
>
> On Sat, 25 Jul 2020 23:14:25 +0200
> Connor McLaughlan <cont6pro3%gmail.com@localhost> wrote:
>
> > i can't boot the install cd on my Ultra 10. It seems to have problems
> > with the IDE controller or the CRD-8322B drive:
> >
> > [] wd0 ata atabus0 drive 0
> > [] wd0: <WDC WD800JB-00FSA0>
> > [] wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sector
> > s
> > [] atapibus0 at atabus1: 2 targets
> > [] cd0 at atapibus0 drive 0: <CRD-8322B, 1998/09/24, 1.05> cdrom removable
> > [] WARNING: 2 errors while detecting hardware; check system log.
> > [] wdc_atapi_intr: bad data phase DATAOUT
> > [] cmdide0:1:0: reset failed
> > [] cmdide0:1:0: unbusy timed out
> > [] cmdide0:1:0: reset failed
> > [] cmdide0:1:0: unbusy timed out
> > ...
> > (conitinues and the install system never comes up)
> >
> > This error can be found on mailing lists dating back to NetBSD 5 / 2009.
> >
> > But there are people running NetBSD on the Ultra 10.
> > So what is the solution? Do i have to use a different kernel or a
> > different cdrom?
>
> That smells like a hardware problem, IDE cables get old and cause
> failures in weird places. An U10 is certainly old enough to do this.
> What I'd try, not necessarily in this order:
> - reseat all the IDE connections, check the connectors for damage,
>   rust, dirt etc.
> - replace the IDE cable
> - try to boot something else, like Solaris, to see if the problem is
>   NetBSD-specific.
>
> have fun
> Michael

Hi Michael,

i have already verified, that the problem is with the NetBSD kernel only.

Both Solaris and Linux sparc64 work just fine on the Ultra 10 and
CRD-8322B drive.
The CRD-8322B drive is from 1999 and seems to be the stock drive,
which made me wondering why there are not more problem reports.

I replaced the drive with a newer one for the installation of NetBSD
and my Ultra 10 is up and running now.
But of course i'd rather use the original drive again.

Here is where i found others to have the exact same problem since about NetBSD5:
https://mail-index.netbsd.org/tech-kern/2014/06/20/msg017259.html
https://mail-index.netbsd.org/port-sparc64/2009/08/12/msg001002.html

Regards,
Connor