Port-sparc64 archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Sun Ultra 5 issue with Mach64
My DMESG and xorg.log
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002,
2003, 2004, 2005,
[ 1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
2014, 2015, 2016, 2017,
[ 1.000000] 2018, 2019, 2020 The NetBSD Foundation, Inc. All
rights reserved.
[ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.000000] The Regents of the University of California. All
rights reserved.
[ 1.000000] NetBSD 9.2 (GENERIC) #0: Wed May 12 13:15:55 UTC 2021
[ 1.000000]
mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/sparc64/compile/GENERIC
[ 1.000000] total memory = 512 MB
[ 1.000000] avail memory = 485 MB
[ 1.000000] timecounter: Timecounters tick every 10.000 msec
[ 1.000000] Kernelized RAIDframe activated
[ 1.000000] running cgd selftest aes-xts-256 aes-xts-512 done
[ 1.000000] mainbus0 (root): SUNW,Ultra-5_10 (Sun Ultra 5/10
UPA/PCI): hostid 7274ec39
[ 1.000000] cpu0 at mainbus0: SUNW,UltraSPARC-IIi @ 400 MHz, CPU id 0
[ 1.000000] cpu0: manuf 17, impl 12, mask 91
[ 1.000000] cpu0: 16K instruction (32 b/l), 16K data (32 b/l), 2048K
external (64 b/l)
[ 1.000000] psycho0 at mainbus0 addr 0xfffc4000
[ 1.000000] psycho0: SUNW,sabre: impl 0, version 0: ign 7c0 bus
range 0 to 2; PCI bus 0
[ 1.000000] pci0 at psycho0
[ 1.000000] pci0: i/o space, memory space enabled
[ 1.000000] ppb0 at pci0 dev 1 function 1: Sun Microsystems Simba
PCI Bridge (rev. 0x13)
[ 1.000000] pci1 at ppb0 bus 1
[ 1.000000] pci1: i/o space, memory space enabled
[ 1.000000] ebus0 at pci1 dev 1 function 0: Sun Microsystems PCIO
Ebus2, revision 0x01
[ 1.000000] auxio0 at ebus0 addr 726000-726003, 728000-728003,
72a000-72a003, 72c000-72c003, 72f000-72f003
[ 1.000000] power at ebus0 addr 724000-724003 ipl 25 not configured
[ 1.000000] SUNW,pll at ebus0 addr 504000-504002 not configured
[ 1.000000] sab0 at ebus0 addr 400000-40007f ipl 2b: rev 3.2
[ 1.000000] sabtty0 at sab0 port 0
[ 1.000000] sabtty1 at sab0 port 1
[ 1.000000] com0 at ebus0 addr 3083f8-3083ff ipl 29: ns16550a,
working fifo
[ 1.000000] com0: console
[ 1.000000] kbd0 at com0 (console input)
[ 1.000000] com1 at ebus0 addr 3062f8-3062ff ipl 2a: ns16550a,
working fifo
[ 1.000000] ms0 at com1
[ 1.000000] wsmouse0 at ms0 mux 0
[ 1.000000] lpt0 at ebus0 addr 3043bc-3043cb, 30015c-30015d,
700000-70000f ipl 22
[ 1.000000] fdthree at ebus0 addr 3023f0-3023f7, 706000-70600f,
720000-720003 ipl 27 not configured
[ 1.000000] clock0 at ebus0 addr 0-1fff: mk48t59
[ 1.000000] flashprom at ebus0 addr 0-fffff not configured
[ 1.000000] audiocs0 at ebus0 addr 200000-2000ff, 702000-70200f,
704000-70400f, 722000-722003 ipl 23 ipl 24: CS4231A
[ 1.000000] audio0 at audiocs0: playback, capture, full duplex
[ 1.000000] audio0: slinear_be:16 -> slinear_le:16 2ch 48000Hz, blk
1920 bytes (10ms) for playback
[ 1.000000] audio0: slinear_be:16 <- slinear_le:16 2ch 48000Hz, blk
1920 bytes (10ms) for recording
[ 1.000000] spkr0 at audio0: PC Speaker (synthesized)
[ 1.000000] wsbell at spkr0 not configured
[ 1.000000] hme0 at pci1 dev 1 function 1: Sun Happy Meal Ethernet,
rev. 1
[ 1.000000] hme0: interrupting at ivec 3021
[ 1.000000] hme0: Ethernet address 08:00:20:74:ec:39
[ 1.000000] nsphy0 at hme0 phy 1: DP83840 10/100 media interface, rev. 1
[ 1.000000] nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
[ 1.000000] machfb0 at pci1 dev 2 function 0: ATI Technologies 3D
Rage Pro (rev. 0x5c)
[ 1.000000] machfb0: using MMIO aperture
[ 1.000000] machfb0: 16 MB aperture at 0xe1000000, 4 KB registers at
0xe2000000
[ 1.000000] machfb0: 128 KB ROM at 0xe1020000
[ 1.000000] machfb0: 4096 KB SGRAM 98.924 MHz, maximum RAMDAC clock
230 MHz
[ 1.000000] machfb0: autoconfiguration error: unable to use
preferred mode
[ 1.000000] machfb0: initial resolution 1280x1024 at 8 bpp
[ 1.000000] wsdisplay0 at machfb0 kbdmux 1: console (default, vt100
emulation)
[ 1.000000] wsmux1: connecting to wsdisplay0
[ 1.000000] wsdisplay0: screen 1-3 added (default, vt100 emulation)
[ 1.000000] direct rendering for machfb0 unsupported
[ 1.000000] cmdide0 at pci1 dev 3 function 0: CMD Technology PCI0646
(rev. 0x03)
[ 1.000000] cmdide0: bus-master DMA support present
[ 1.000000] cmdide0: primary channel configured to native-PCI mode,
channel non-independant
[ 1.000000] cmdide0: using ivec 1820 for native-PCI interrupt
[ 1.000000] atabus0 at cmdide0 channel 0
[ 1.000000] cmdide0: secondary channel configured to native-PCI
mode, channel non-independant
[ 1.000000] atabus1 at cmdide0 channel 1
[ 1.000000] ppb1 at pci0 dev 1 function 0: Sun Microsystems Simba
PCI Bridge (rev. 0x13)
[ 1.000000] pci2 at ppb1 bus 2
[ 1.000000] pci2: i/o space, memory space enabled
[ 1.000000] pcons at mainbus0 not configured
[ 1.000000] timecounter: Timecounter "clockinterrupt" frequency 100
Hz quality 0
[ 1.000003] timecounter: Timecounter "tick-counter" frequency
400000000 Hz quality 100
[ 1.000003] No counter-timer -- using %tick at 400MHz as system clock.
[ 1.009984] wskbd0 at kbd0: console keyboard, using wsdisplay0
[ 4.139974] wd0 at atabus0 drive 0
[ 4.139974] wd0: <KINGSTON SA400S37120G>
[ 4.150350] wd0: drive supports 16-sector PIO transfers, LBA48
addressing
[ 4.150350] wd0: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect
x 234441648 sectors
[ 4.159978] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA
mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
[ 4.159978] wd0(cmdide0:0:0): using PIO mode 4, DMA mode 2 (using
DMA), WRITE DMA FUA EXT
[ 4.159978] atapibus0 at atabus1: 2 targets
[ 4.169975] cd0 at atapibus0 drive 0: <CRD-8322B, 2000/07/02, 1.06>
cdrom removable
[ 4.169975] cd0: drive supports PIO mode 4, DMA mode 2
[ 4.169975] cd0(cmdide0:1:0): using PIO mode 4, DMA mode 2 (using DMA)
[ 4.179976] WARNING: 1 error while detecting hardware; check system log.
[ 4.179976] root on wd0a dumps on wd0b
[ 4.192493] root file system type: ffs
[ 4.200886] kern.module.path=/stand/sparc64/9.2/modules
[ 351.751]
X.Org X Server 1.20.5
X Protocol Version 11, Revision 0
[ 351.753] Build Operating System: NetBSD/sparc64 9.2 - The NetBSD
Foundation, Inc.
[ 351.754] Current Operating System: NetBSD sunultra5 9.2 NetBSD 9.2
(GENERIC) #0: Wed May 12 13:15:55 UTC 2021
mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/sparc64/compile/GENERIC sparc64
[ 351.759] Build Date: 03 March 2019 07:11:23AM
[ 351.759]
[ 351.760] Current version of pixman: 0.38.4
[ 351.760] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 351.761] Markers: (--) probed, (**) from config file, (==) default
setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 351.765] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 17
16:40:34 2022
[ 351.771] (II) Loader magic: 0x4e41a8
[ 351.771] (II) Module ABI versions:
[ 351.771] X.Org ANSI C Emulation: 0.4
[ 351.771] X.Org Video Driver: 24.0
[ 351.772] X.Org XInput driver : 24.1
[ 351.772] X.Org Server Extension : 10.0
[ 352.504] (WW) xf86EnableIO -1
[ 352.505] (II) xf86EnableIO: 0xffffffffffffffff
[ 352.505] (WW) Can't map IO space! (9)
[ 352.518] (--) PCI:*(1@1:2:0) 1002:4750:0000:0000 rev 92, Mem @
0xe1000000/16777216, 0xe2000000/4096, I/O @ 0x00000000/256, BIOS @
0x????????/131072
[ 352.563] (EE) listPossibleVideoDrivers: trying /dev/fb0
[ 352.563] (EE) listPossibleVideoDrivers: trying /dev/fb1
[ 352.564] (EE) listPossibleVideoDrivers: trying /dev/fb2
[ 352.564] (EE) listPossibleVideoDrivers: trying /dev/fb3
[ 352.564] (EE) listPossibleVideoDrivers: trying /dev/fb4
[ 352.564] (EE) listPossibleVideoDrivers: trying /dev/fb5
[ 352.564] (EE) listPossibleVideoDrivers: trying /dev/fb6
[ 352.564] (EE) listPossibleVideoDrivers: trying /dev/fb7
[ 352.564] (EE) listPossibleVideoDrivers: trying /dev/fb8
[ 352.565] (EE) listPossibleVideoDrivers: trying /dev/fb9
[ 352.567] (==) Using default built-in configuration (30 lines)
[ 352.567] (==) --- Start of built-in configuration ---
[ 352.567] Section "Device"
[ 352.567] Identifier "Builtin Default ati Device 0"
[ 352.567] Driver "ati"
[ 352.567] EndSection
[ 352.568] Section "Screen"
[ 352.568] Identifier "Builtin Default ati Screen 0"
[ 352.568] Device "Builtin Default ati Device 0"
[ 352.568] EndSection
[ 352.568] Section "Device"
[ 352.568] Identifier "Builtin Default sunffb Device 0"
[ 352.568] Driver "sunffb"
[ 352.568] EndSection
[ 352.568] Section "Screen"
[ 352.568] Identifier "Builtin Default sunffb Screen 0"
[ 352.569] Device "Builtin Default sunffb Device 0"
[ 352.569] EndSection
[ 352.569] Section "Device"
[ 352.569] Identifier "Builtin Default wsfb Device 0"
[ 352.569] Driver "wsfb"
[ 352.569] EndSection
[ 352.569] Section "Screen"
[ 352.569] Identifier "Builtin Default wsfb Screen 0"
[ 352.569] Device "Builtin Default wsfb Device 0"
[ 352.569] EndSection
[ 352.570] Section "ServerLayout"
[ 352.570] Identifier "Builtin Default Layout"
[ 352.570] Screen "Builtin Default ati Screen 0"
[ 352.570] Screen "Builtin Default sunffb Screen 0"
[ 352.570] Screen "Builtin Default wsfb Screen 0"
[ 352.570] EndSection
[ 352.570] (==) --- End of built-in configuration ---
[ 352.575] (==) ServerLayout "Builtin Default Layout"
[ 352.575] (**) |-->Screen "Builtin Default ati Screen 0" (0)
[ 352.575] (**) | |-->Monitor "<default monitor>"
[ 352.585] (**) | |-->Device "Builtin Default ati Device 0"
[ 352.585] (==) No monitor specified for screen "Builtin Default ati
Screen 0".
Using a default monitor configuration.
[ 352.585] (**) |-->Screen "Builtin Default sunffb Screen 0" (1)
[ 352.585] (**) | |-->Monitor "<default monitor>"
[ 352.589] (**) | |-->Device "Builtin Default sunffb Device 0"
[ 352.589] (==) No monitor specified for screen "Builtin Default
sunffb Screen 0".
Using a default monitor configuration.
[ 352.589] (**) |-->Screen "Builtin Default wsfb Screen 0" (2)
[ 352.589] (**) | |-->Monitor "<default monitor>"
[ 352.593] (**) | |-->Device "Builtin Default wsfb Device 0"
[ 352.593] (==) No monitor specified for screen "Builtin Default wsfb
Screen 0".
Using a default monitor configuration.
[ 352.593] (==) Not automatically adding devices
[ 352.593] (==) Not automatically enabling devices
[ 352.593] (==) Not automatically adding GPU devices
[ 352.594] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 352.600] (==) FontPath set to:
/usr/X11R7/lib/X11/fonts/misc/,
/usr/X11R7/lib/X11/fonts/TTF/,
/usr/X11R7/lib/X11/fonts/Type1/,
/usr/X11R7/lib/X11/fonts/75dpi/,
/usr/X11R7/lib/X11/fonts/100dpi/
[ 352.600] (==) ModulePath set to "/usr/X11R7/lib/modules"
[ 352.602] (==) |-->Input Device "<default pointer>"
[ 352.602] (==) |-->Input Device "<default keyboard>"
[ 352.602] (==) The core pointer device wasn't specified explicitly in
the layout.
Using the default mouse configuration.
[ 352.602] (==) The core keyboard device wasn't specified explicitly
in the layout.
Using the default keyboard configuration.
[ 352.602] (II) LoadModule: "glx"
[ 352.611] (II) Loading /usr/X11R7/lib/modules/extensions/libglx.so
[ 352.628] (II) Module glx: vendor="X.Org Foundation"
[ 352.628] compiled for 1.20.5, module version = 1.0.0
[ 352.628] ABI class: X.Org Server Extension, version 10.0
[ 352.630] (II) LoadModule: "ati"
[ 352.631] (II) Loading /usr/X11R7/lib/modules/drivers/ati_drv.so
[ 352.638] (II) Module ati: vendor="X.Org Foundation"
[ 352.638] compiled for 1.20.5, module version = 6.14.6
[ 352.638] Module class: X.Org Video Driver
[ 352.638] ABI class: X.Org Video Driver, version 24.0
[ 352.638] (II) LoadModule: "mach64"
[ 352.640] (II) Loading /usr/X11R7/lib/modules/drivers/mach64_drv.so
[ 352.649] (II) Module mach64: vendor="X.Org Foundation"
[ 352.649] compiled for 1.20.5, module version = 6.9.5
[ 352.649] Module class: X.Org Video Driver
[ 352.649] ABI class: X.Org Video Driver, version 24.0
[ 352.651] (II) LoadModule: "sunffb"
[ 352.653] (II) Loading /usr/X11R7/lib/modules/drivers/sunffb_drv.so
[ 352.658] (II) Module sunffb: vendor="X.Org Foundation"
[ 352.658] compiled for 1.20.5, module version = 1.2.2
[ 352.659] Module class: X.Org Video Driver
[ 352.659] ABI class: X.Org Video Driver, version 24.0
[ 352.659] (II) LoadModule: "wsfb"
[ 352.661] (II) Loading /usr/X11R7/lib/modules/drivers/wsfb_drv.so
[ 352.665] (II) Module wsfb: vendor="X.Org Foundation"
[ 352.665] compiled for 1.20.5, module version = 0.4.0
[ 352.665] ABI class: X.Org Video Driver, version 24.0
[ 352.666] (II) LoadModule: "mouse"
[ 352.667] (II) Loading /usr/X11R7/lib/modules/drivers/mouse_drv.so
[ 352.673] (II) Module mouse: vendor="X.Org Foundation"
[ 352.673] compiled for 1.20.5, module version = 1.9.2
[ 352.673] Module class: X.Org XInput Driver
[ 352.673] ABI class: X.Org XInput driver, version 24.1
[ 352.675] (II) LoadModule: "kbd"
[ 352.676] (II) Loading /usr/X11R7/lib/modules/drivers/kbd_drv.so
[ 352.680] (II) Module kbd: vendor="X.Org Foundation"
[ 352.680] compiled for 1.20.5, module version = 1.9.0
[ 352.680] Module class: X.Org XInput Driver
[ 352.681] ABI class: X.Org XInput driver, version 24.1
[ 352.681] (II) MACH64: Driver for ATI Mach64 chipsets
[ 352.681] (II) SUNFFB: driver for Creator, Creator 3D and Elite 3D
[ 352.681] (II) wsfb: driver for wsdisplay framebuffer: wsfb
[ 352.682] (--) Using wscons driver on /dev/ttyE1 in pcvt
compatibility mode (version 3.32)
[ 352.682] (--) using VT number 2
[ 352.692] (WW) xf86EnableIO 9
[ 352.692] (II) xf86EnableIO: 0xffffffffffffffff
[ 352.692] (WW) Can't map IO space! (22)
[ 352.692] (WW) Falling back to old probe method for sunffb
[ 352.692] (WW) Falling back to old probe method for wsfb
[ 352.693] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card
support
[ 352.695] (II) MACH64(0): Creating default Display subsection in
Screen section
"Builtin Default ati Screen 0" for depth/fbbpp 24/32
[ 352.695] (==) MACH64(0): Depth 24, (--) framebuffer bpp 32
[ 352.697] (==) MACH64(0): Using EXA acceleration architecture
[ 352.699] (EE) Unable to map mmio aperture. Invalid argument (22)
[ 352.699] (WW) MACH64: Mach64 in slot 1:2:0 could not be detected!
[ 352.701] (II) UnloadModule: "mach64"
[ 352.701] (EE) Screen(s) found, but none have a usable configuration.
[ 352.702] (EE)
Fatal server error:
[ 352.703] (EE) no screens found(EE)
[ 352.705] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 352.706] (EE) Please also check the log file at
"/var/log/Xorg.0.log" for additional information.
[ 352.707] (EE)
[ 352.711] (EE) Server terminated with error (1). Closing log file.
I have no idea.. google gave me very little..
Any input is welcome
Thank you
Home |
Main Index |
Thread Index |
Old Index