Re: NetBSD 10 isn't happy on Sun Fire V245 (fwd)

To: port-sparc64%netbsd.org@localhost
Subject: Re: NetBSD 10 isn't happy on Sun Fire V245 (fwd)
From: John Klos <john%klos.com@localhost>
Date: Fri, 19 Apr 2024 00:43:56 +0000 (UTC)

[   1.0000000] mpt0: interrupting at ivec 2f8f

SIR

ERROR: Software Initiated Reset has occurred.

I compiled a kernel with "no mpt*" and I'm rooting on a USB disk, and allother aspects of NetBSD 10 are working fine.

So long as this Sun Fire V245 can handle hotter temperatures in the comingmonths, as the name might suggest it should, we should be getting NetBSD10 sparc64 binary packages soon :)


John


[     1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[     1.000000]     2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[     1.000000]     2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[     1.000000]     2024
[     1.000000]     The NetBSD Foundation, Inc.  All rights reserved.
[     1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[     1.000000]     The Regents of the University of California.  All rights reserved.

[     1.000000] NetBSD 10.0 (SPARKY) #0: Thu Apr 18 18:07:49 UTC 2024
[     1.000000] 	john%frigg.zia.io@localhost:/usr/obj-sparc64/sys/arch/sparc64/compile/SPARKY
[     1.000000] total memory = 14336 MB
[     1.000000] avail memory = 14064 MB
[     1.000000] timecounter: Timecounters tick every 10.000 msec
[     1.000000] Kernelized RAIDframe activated
[     1.000000] mainbus0 (root): SUNW,Sun-Fire-V245 (Sun Fire V245): hostid 84a238ca
[     1.000000] cpu0 at mainbus0: SUNW,UltraSPARC-IIIi @ 1504 MHz, CPU id 0
[     1.000000] cpu0: manuf 3e, impl 16, mask 34
[     1.000000] cpu0: system tick frequency 20 MHz
[     1.000000] cpu0: 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l)
[     1.000000] cpu1 at mainbus0: SUNW,UltraSPARC-IIIi @ 1504 MHz, CPU id 1
[     1.000000] cpu1: manuf 3e, impl 16, mask 34
[     1.000000] cpu1: system tick frequency 20 MHz
[     1.000000] cpu1: 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l)
[     1.000000] memory-controller at mainbus0 not configured
[     1.000000] memory-controller at mainbus0 not configured
[     1.000000] pyro0 at mainbus0: "Fire", rev 3, ign 780, bus A 2 to 13
[     1.000000] pyro0: pci0 at pyro0
[     1.000000] pci0: i/o space, memory space enabled
[     1.000000] ppb0 at pci0 dev 0 function 0: PLX Technology product 8532 (rev. 0xba)
[     1.000000] ppb0: PCI Express capability version 1 <Upstream Port of PCI-E Switch>
[     1.000000] pci1 at ppb0 bus 3
[     1.000000] pci1: i/o space, memory space enabled
[     1.000000] ppb1 at pci1 dev 1 function 0: PLX Technology product 8532 (rev. 0xba)
[     1.000000] ppb1: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x4 @ 2.5GT/s
[     1.000000] pci2 at ppb1 bus 4
[     1.000000] pci2: i/o space, memory space enabled
[     1.000000] ppb2 at pci2 dev 0 function 0: Acer Labs M5249 Hypertransport to PCI Bridge (rev. 0x00)
[     1.000000] ppb2: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge>
[     1.000000] pci3 at ppb2 bus 5
[     1.000000] pci3: i/o space, memory space enabled
[     1.000000] ohci0 at pci3 dev 28 function 0: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
[     1.000000] ohci0: interrupting at ivec 780
[     1.000000] ohci0: OHCI version 1.0, legacy support
[     1.000000] ohci0: Clear PME# now
[     1.000000] usb0 at ohci0: USB revision 1.0
[     1.000000] ohci1 at pci3 dev 28 function 1: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
[     1.000000] ohci1: interrupting at ivec 780
[     1.000000] ohci1: OHCI version 1.0, legacy support
[     1.000000] ohci1: Clear PME# now
[     1.000000] usb1 at ohci1: USB revision 1.0
[     1.000000] ehci0 at pci3 dev 28 function 3: Acer Labs M5239 USB 2.0 Host Controller (rev. 0x01)
[     1.000000] ehci0: 32-bit DMA
[     1.000000] ehci0: interrupting at ivec 781
[     1.000000] ehci0: EHCI version 1.0
[     1.000000] ehci0: wrong number of companions (3 != 2)
[     1.000000] ehci0: 2 companion controllers, 3 ports each: ohci0 ohci1
[     1.000000] usb2 at ehci0: USB revision 2.0
[     1.000000] ebus0 at pci3 dev 30 function 0: Acer Labs product 1575, revision 0x00
[     1.000000] rtc0 at ebus0 addr 70-73: mc146818 compatible time-of-day clock: m5823
[     1.000000] aceride0 at pci3 dev 31 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc8)
[     1.000000] aceride0: bus-master DMA support present
[     1.000000] aceride0: primary channel configured to native-PCI mode
[     1.000000] aceride0: using ivec 2f84 for native-PCI interrupt
[     1.000000] atabus0 at aceride0 channel 0
[     1.000000] aceride0: secondary channel configured to native-PCI mode
[     1.000000] atabus1 at aceride0 channel 1
[     1.000000] ppb3 at pci1 dev 2 function 0: PLX Technology product 8532 (rev. 0xba)
[     1.000000] ppb3: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x4 @ 2.5GT/s
[     1.000000] pci4 at ppb3 bus 6
[     1.000000] pci4: i/o space, memory space enabled
[     1.000000] ppb4 at pci1 dev 8 function 0: PLX Technology product 8532 (rev. 0xba)
[     1.000000] ppb4: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x8 @ 2.5GT/s
[     1.000000] pci5 at ppb4 bus 7
[     1.000000] pci5: i/o space, memory space enabled
[     1.000000] ppb5 at pci1 dev 9 function 0: PLX Technology product 8532 (rev. 0xba)
[     1.000000] ppb5: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x4 @ 2.5GT/s
[     1.000000] pci6 at ppb5 bus 8
[     1.000000] pci6: i/o space, memory space enabled
[     1.000000] ppb6 at pci6 dev 0 function 0: ServerWorks BCM5714/BCM5715 Integral PCI-E to PCI-X Bridge (rev. 0xb5)
[     1.000000] ppb6: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge>
[     1.000000] pci7 at ppb6 bus 9
[     1.000000] pci7: i/o space, memory space enabled
[     1.000000] bge0 at pci7 dev 4 function 0: Broadcom BCM5714 Gigabit Ethernet
[     1.000000] bge0: interrupting at ivec 3795
[     1.000000] bge0: HW config 00010115, 00000015, 00000000, 00000000 00000000
[     1.000000] bge0: ASIC BCM5715 A3 (0x9003), Ethernet address 00:14:4f:a2:38:ca
[     1.000000] bge0: autoconfiguration error: WARNING: failed to restrict dma range, falling back to parent bus dma range
[     1.000000] bge0: setting short Tx thresholds
[     1.000000] brgphy0 at bge0 phy 1: BCM5714 1000BASE-T/X media interface, rev. 0
[     1.000000] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[     1.000000] bge1 at pci7 dev 4 function 1: Broadcom BCM5714 Gigabit Ethernet
[     1.000000] bge1: interrupting at ivec 3796
[     1.000000] bge1: HW config 00000114, 00000014, 00000000, 00000000 00000000
[     1.000000] bge1: ASIC BCM5715 A3 (0x9003), Ethernet address 00:14:4f:a2:38:cb
[     1.000000] bge1: autoconfiguration error: WARNING: failed to restrict dma range, falling back to parent bus dma range
[     1.000000] bge1: setting short Tx thresholds
[     1.000000] brgphy1 at bge1 phy 1: BCM5714 1000BASE-T/X media interface, rev. 0
[     1.000000] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[     1.000000] ppb7 at pci7 dev 8 function 0: ServerWorks HT1000 PCI/PCI-X Bridge (rev. 0xb4)
[     1.000000] pci8 at ppb7 bus 10
[     1.000000] pci8: i/o space, memory space enabled
[     1.000000] ppb8 at pci1 dev 10 function 0: PLX Technology product 8532 (rev. 0xba)
[     1.000000] ppb8: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x4 @ 2.5GT/s
[     1.000000] pci9 at ppb8 bus 11
[     1.000000] pci9: i/o space, memory space enabled
[     1.000000] ppb9 at pci9 dev 0 function 0: ServerWorks BCM5714/BCM5715 Integral PCI-E to PCI-X Bridge (rev. 0xb5)
[     1.000000] ppb9: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge>
[     1.000000] pci10 at ppb9 bus 12
[     1.000000] pci10: i/o space, memory space enabled
[     1.000000] bge2 at pci10 dev 4 function 0: Broadcom BCM5714 Gigabit Ethernet
[     1.000000] bge2: interrupting at ivec 3796
[     1.000000] bge2: HW config 00010115, 00000015, 00000000, 00000000 00000000
[     1.000000] bge2: ASIC BCM5715 A3 (0x9003), Ethernet address 00:14:4f:a2:38:cc
[     1.000000] bge2: autoconfiguration error: WARNING: failed to restrict dma range, falling back to parent bus dma range
[     1.000000] bge2: setting short Tx thresholds
[     1.000000] brgphy2 at bge2 phy 1: BCM5714 1000BASE-T/X media interface, rev. 0
[     1.000000] brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[     1.000000] bge3 at pci10 dev 4 function 1: Broadcom BCM5714 Gigabit Ethernet
[     1.000000] bge3: interrupting at ivec 3797
[     1.000000] bge3: HW config 00000114, 00000014, 00000000, 00000000 00000000
[     1.000000] bge3: ASIC BCM5715 A3 (0x9003), Ethernet address 00:14:4f:a2:38:cd
[     1.000000] bge3: autoconfiguration error: WARNING: failed to restrict dma range, falling back to parent bus dma range
[     1.000000] bge3: setting short Tx thresholds
[     1.000000] brgphy3 at bge3 phy 1: BCM5714 1000BASE-T/X media interface, rev. 0
[     1.000000] brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[     1.000000] ppb10 at pci10 dev 8 function 0: ServerWorks HT1000 PCI/PCI-X Bridge (rev. 0xb4)
[     1.000000] pci11 at ppb10 bus 13
[     1.000000] pci11: i/o space, memory space enabled
[     1.000000] Symbios Logic SAS1064 (SCSI mass storage, vendor-specific, revision 0x02) at pci11 dev 1 function 0 not configured
[     1.000000] pyro1 at mainbus0: "Fire", rev 3, ign 7c0, bus B 2 to 4
[     1.000000] pyro1: pci12 at pyro1
[     1.000000] pci12: i/o space, memory space enabled
[     1.000000] ppb11 at pci12 dev 0 function 0: Intel Serial to Parallel PCI Bridge A (rev. 0x09)
[     1.000000] ppb11: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge>
[     1.000000] pci13 at ppb11 bus 3
[     1.000000] pci13: i/o space, memory space enabled
[     1.000000] ppb12 at pci12 dev 0 function 2: Intel Serial to Parallel PCI Bridge B (rev. 0x09)
[     1.000000] ppb12: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge>
[     1.000000] pci14 at ppb12 bus 4
[     1.000000] pci14: i/o space, memory space enabled
[     1.000000] ebus1 at mainbus0
[     1.000000] flashprom at ebus1 addr 0-1fffff not configured
[     1.000000] com0 at ebus1 addr 80-87 ipl 7c8: ns16550a, 16-byte FIFO
[     1.000000] com0: console
[     1.000000] com1 at ebus1 addr 40-47 ipl 7c9: ns16550a, 16-byte FIFO
[     1.000000] rmc-comm at ebus1 addr 0-7 ipl 7ca not configured
[     1.000000] gpio at ebus1 addr c0-c0 not configured
[     1.000000] env-monitor at ebus1 addr 0-80 not configured
[     1.000000] power at ebus1 addr 40-c1 ipl 7c3 not configured
[     1.000000] i2c at mainbus0 not configured
[     1.000000] pcons at mainbus0 not configured
[     1.000000] WARNING: system needs entropy for security; see entropy(7)
[     1.000000] timecounter: Timecounter "tick-counter" frequency 1504000000 Hz quality 100
[     1.000003] timecounter: Timecounter "stick-counter" frequency 20000000 Hz quality 200
[     1.000018] No counter-timer -- using %stick at 20MHz as system clock.
[     1.000018] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[     1.748380] uhub0 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[     1.748380] uhub0: 3 ports with 3 removable, self powered
[     1.748380] uhub1 at usb1: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[     1.748380] uhub1: 3 ports with 3 removable, self powered
[     1.748380] uhub2 at usb2: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[     1.748380] uhub2: 8 ports with 8 removable, self powered
[     2.444605] atapibus0 at atabus0: 2 targets
[     2.504606] cd0 at atapibus0 drive 0: <MATSHITADVD-RAM UJ-85JS, , F100> cdrom removable
[     2.604605] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
[     2.604605] cd0(aceride0:0:0): using PIO mode 4
[     3.414605] umass0 at uhub2 port 2 configuration 1 interface 0
[     3.486065] umass0: SABRENT (0x152d) SABRENT (0x1561), rev 2.10/2.04, addr 2
[     3.570437] umass0: using SCSI over Bulk-Only
[     3.570437] scsibus0 at umass0: 2 targets, 1 lun per target
[     3.637102] sd0 at scsibus0 target 0 lun 0: <SABRENT, , 0204> disk fixed
[     3.724606] sd0: fabricating a geometry
[     3.764605] sd0: 476 GB, 488386 cyl, 64 head, 32 sec, 512 bytes/sect x 1000215216 sectors
[     3.874606] sd0: fabricating a geometry
[     4.424606] swwdog0: software watchdog initialized
[     4.487076] WARNING: 4 errors while detecting hardware; check system log.
[     4.569674] FATAL: boot device not found, check your firmware settings!
[     4.648838] root on sd0a dumps on sd0b
[     4.694605] kern.module.path=/stand/sparc64/10.0/modules
[     5.324606] uhub3 at uhub1 port 1: Atmel (0x03eb) Standard USB Hub (0x3301), class 9/0, rev 1.10/3.00, addr 2
[     5.454605] uhub3: 4 ports with 4 removable, self powered
[     5.844605] entropy: best effort
[   380.304606] umass1 at uhub2 port 1 configuration 1 interface 0
[   380.371882] umass1: Phison Electronics Corp. (0x13fe) USB DISK 3.0 (0x6700), rev 2.10/1.10, addr 3
[   380.481254] umass1: using SCSI over Bulk-Only
[   380.481254] scsibus1 at umass1: 2 targets, 1 lun per target
[   380.554605] sd1 at scsibus1 target 0 lun 0: <, USB DISK 3.0, PMAP> disk removable
[   380.644605] sd1: fabricating a geometry
[   380.684604] sd1: 29604 MB, 29604 cyl, 64 head, 32 sec, 512 bytes/sect x 60628992 sectors
[   380.784605] sd1: fabricating a geometry
[   381.074605] sd1: GPT GUID: 54286957-ac0f-482e-b06d-57448179e16a
[   381.074605] dk0 at sd1: "a2e1394a-f75c-4950-8721-6b8553888789", 262144 blocks at 64, type: msdos
[   381.174604] dk1 at sd1: "usb32gig", 60366720 blocks at 262208, type: ffs
[   451.904605] umass2 at uhub3 port 1 configuration 1 interface 0
[   451.964605] umass2: JMicron (0x152d) External (0x0583), rev 2.10/2.09, addr 3
[   452.054604] umass2: using SCSI over Bulk-Only
[   452.054604] scsibus2 at umass2: 2 targets, 1 lun per target
[   452.154605] sd2 at scsibus2 target 0 lun 0: <JMicron, Tech, 0209> disk fixed
[   452.244605] sd2(umass2:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
[   452.325748]     SENSE KEY:  Not Ready
[   452.375746]      ASC/ASCQ:  Logical Unit Is In Process Of Becoming Ready
[   452.455952] sd2: drive offline
[   455.744605] sd2: fabricating a geometry
[   631.974608] entropy: ready

Follow-Ups:
- Re: NetBSD 10 isn't happy on Sun Fire V245 (fwd)
  - From: Riccardo Mottola

Prev by Date: LSI SAS 9300-8i on sparc64
Next by Date: Re: NetBSD 10 isn't happy on Sun Fire V245 (fwd)
Previous by Thread: LSI SAS 9300-8i on sparc64
Next by Thread: Re: NetBSD 10 isn't happy on Sun Fire V245 (fwd)
Indexes:

Home | Main Index | Thread Index | Old Index