Port-sun2 archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: sun2 and playstation2 ports to be moved into Attic



> The sun2 and playstation2 ports have been neglected for a long time and
> neither has successfully completed an installation in recent history.

What's the problem on sun2? Is there any such PR?

Daily builds always fail in rump (which should be handled by you ;-p)
but isn't it a problem which could happen on all NOPIC ports,
not sun2 specific?

At least -current GENERIC kernel still works on TME,
even on multiuser with 4MB ram.

IMO, "buildable state" doesn't refrect port status at all.
I doubt cesfic and luna68k are still functional since
no reports (even no working machines) for long years,
for example. (unfortunately no emulators for them)

---
Self Test completed successfully.

Sun Workstation, Model Sun-2/120 or Sun-2/170, Sun-2 keyboard
ROM Rev R, 4MB memory installed
Serial #51388, Ethernet address 8:0:20:0:0:1

Probing Multibus: sd ec
Using RS232 A input.
Auto-boot in progress...
Boot: sd(0,0,0)vmunix 
>> NetBSD/sun2 ufsboot [1.13]
open vmunix: No such file or directory
ufsboot: vmunix: loadfile() failed.
filename? [netbsd]: 
1456828+218628 [149376+137986]=0x1df670
relocating program...starting program at 0x6000
console is ttya
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.99.22 (GENERIC) #64: Fri Nov 13 04:23:34 JST 2009
        tsutsui@mirage:/usr/src/sys/arch/sun2/compile/GENERIC
Model: sun2 {120,170}
fpu: no math support
total memory = 4096 KB
avail memory = 1964 KB
mainbus0 (root)
obio0 at mainbus0
zs0 at obio0 addr 0x2000 ipl 6
zstty0 at zs0 channel 0 (console i/o)
zstty1 at zs0 channel 1
clock0 at obio0 addr 0x2800 ipl 5
tod0 at obio0 addr 0x3800: mm58167
obmem0 at mainbus0
zs1 at obmem0 addr 0x780000 ipl 6
zstty2 at zs1 channel 0
kbd0 at zstty2
zstty3 at zs1 channel 1
ms0 at zstty3
mbmem0 at mainbus0
sc0 at mbmem0 addr 0x80000 ipl 2: options=0xff
scsibus0 at sc0: 8 targets, 8 luns per target
ec0 at mbmem0 addr 0xe0000 ipl 3
ec0: address 08:00:20:00:00:01
enabling interrupts
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: <TME, DISK, 0000> disk fixed
sd0: fabricating a geometry
sd0: 1024 MB, 1024 cyl, 64 head, 32 sec, 512 bytes/sect x 2097152 sectors
sd0: async, 8-bit transfers
st0 at scsibus0 target 4 lun 0: <EMULEX, MT-02 QIC, 0000> tape removable
st0: drive empty
st0: async, 8-bit transfers
boot device: sd0a
root on sd0a dumps on sd0b
sd0: fabricating a geometry
root file system type: ffs
WARNING: preposterous TOD clock time
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
Fri Nov 13 04:26:51 JST 2009
swapctl: adding /dev/sd0b as swap device at priority 0
Checking for botched superblock upgrades: done.
Starting file system checks:
/dev/rsd0a: file system is clean; not checking
Setting tty flags.
Setting sysctl variables:
Starting network.
Hostname: sun2
Configuring network interfaces: ec0.
add net default: gateway 192.168.20.1
Adding interface aliases:
Building databases...
Starting syslogd.
Checking for core dump...
^CMounting all filesystems...
Clearing temporary files.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
Starting virecover.
Starting local daemons:.
Updating motd.
postfix: warning: inet_protocols: IPv6 support is disabled: Address family not 
supported by protocol family
postfix: warning: inet_protocols: configuring for IPv4 support only
postsuper: warning: inet_protocols: IPv6 support is disabled: Address family 
not supported by protocol family
postsuper: warning: inet_protocols: configuring for IPv4 support only
postfix/postlog: warning: inet_protocols: IPv6 support is disabled: Address 
family not supported by protocol family
postfix/postlog: warning: inet_protocols: configuring for IPv4 support only
postfix/postfix-script: starting the Postfix mail system
Starting inetd.
Starting cron.
Fri Nov 13 04:31:20 JST 2009

NetBSD/sun2 (sun2) (ttya)

login: root
Nov 13 04:31:43 sun2 login: ROOT LOGIN (root) ON ttya
Last login: Fri Nov 13 04:21:31 2009 on kd
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.99.22 (GENERIC) #64: Fri Nov 13 04:23:34 JST 2009

Welcome to NetBSD!

This system is running a development snapshot of the NetBSD operating system,
also known as NetBSD-current.  It is highly possible for it to contain serious
bugs, regressions, broken features or other problems.  Please bear this in mind
and use the system with care.

You are encouraged to test this version as thoroughly as possible.  Should you
encounter any problem, please report it back to the development team using the
send-pr(1) utility (requires a working MTA).  If yours is not properly set up,
use the web interface at: http://www.NetBSD.org/Misc/send-pr.html

Thank you for helping us test and improve NetBSD.

Terminal type? [unknown] 
Terminal type is unknown.
We recommend creating a non-root account and using su(1) for root access.
sun2# 
---
Izumi Tsutsui


Home | Main Index | Thread Index | Old Index