Hi Keith, all of port-sun3,

> If I boot my 3/75 using the SCSI_TEST kernel with ID
> 
> NetBSD 1.1_ALPHA (SCSI_TEST) #19: Mon Nov  6 15:19:18 EST 1995
>     gwr@venus:/play/gwr/netbsd/work/src/sys/arch/sun3/compile/SCSI_TEST
> 
> and then try to run X11R6, several of the programs called by
> my .xinitrc (among them awk, sed, tr, tty, and csh) core dump.
> so, for that matter, does gdb.
> 
Same here with my 3/60M: I've got /usr/X11R6/xdm as the final command in my
/etc/rc (except for an exit 0), and from the moment I enter my login in xdm,
it very often coredumps almost everything, until my /-partition is full. If,
on the other hand, I enable the console login and remove xdm from /etc/rc,
everything will work fine, even when I start xdm from the root shell!

> On the other hand, if I boot this kernel:
> 
> NetBSD 1.0A (GENERIC) #31: Mon Aug 21 16:38:21 EDT 1995
>     gwr@venus:/play/gwr/netbsd/work/src/sys/arch/sun3/compile/GENERIC
> 
> X11R6 starts up just fine (though it takes forever)

Of course, works very good this kernel.

> scsibus0 at si0
> si0 targ 0 lun 0: <SEAGATE, ST31200N, 8630> SCSI1 0/direct fixed
> sd0 at scsibus0: 1006MB, 2700 cyl, 9 head, 84 sec, 512 bytes/sec
> si0 targ 1 lun 0: <EMULEX, MD21/S2     ESDI, A00> SCSI0 0/direct fixed
> sd2 at scsibus0: 135MB, 1024 cyl, 8 head, 33 sec, 512 bytes/sec

Anyone knows what happened to sd1? I've got a disk at SCSI adress 0, and one
at SCSI_1, but they turn into sd0 and sd2, just like on Keiths machine.

Bye, Paul.

-------------------------------------------------------------------------
 E=  /// Paul Boven <e.p.boven@student.utwente.nl> pe1nut@pi8daz.#twe.nld
    /// A2000HD, AmiTCP_4.0b and GG-II+ ethernet   QRV 145.575 MHz JO32KF
\\\/// "Run to the bedroom,  in the suitcase on the  left you'll  find my
 \XX/ favourite axe"                One of my turns, Pink Floyd, The Wall
-------------------------------------------------------------------------