Subject: RZ57 question
To: None <port-vax@netbsd.org>
From: Gyenes Istvan <frts@simba.sch.bme.hu>
List: port-vax
Date: 02/14/2000 22:28:24
This is a multi-part message in MIME format.
------=_NextPart_000_07E8_01BF773A.CE35BCE0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Hello ,
I've got a VaxServer 3100 .=20
The problem is that NetBSD doesn't recognise the RZ57-E in the strorage =
expansion box
>>> sho dev
VMS/VMB ULTRIX ADDR DEVTYP NUMBYTES RM/FX WP DEVNAM REV
------- ------ -------- ------ -------- ----- -- ------ ---
ESA0 SE0 08-00-2B-26-57-EA
DKA0 RZ0 A/0/0/00 DISK 1.05 GB FX RZ26 T370
MKA500 TZ5 A/5/0/00 TAPE ........ RM
...HostID.... A/6 INITR
DKB200 RZ10 B/2/0/00 DISK 209 MB FX RZ24 211B
DKB300 RZ11 B/3/0/00 DISK 1.00 GB FX RZ57 5000
...HostID.... B/6 INITR
>>>
NetBSD 1.4P (UVAXDMA) #0: Thu Jan 20 04:30:09 CET 2000
root@vax:/usr/users/frts/src/sys/arch/vax/compile/UVAXDMA
MicroVAX
cpu: KA41/42
cpu: Enabling primary cache, no secondary cache present
total memory =3D 24452 KB
avail memory =3D 19664 KB
using 331 buffers containing 1324 KB of memory
mainbus0 (root)
vsbus0 at mainbus0
vsbus0: interrupt mask 8
le0 at vsbus0 csr 0x200e0000 vec 120 ipl 14 maskbit 5
le0: address 08:00:2b:26:57:ea
le0: 32 receive buffers, 8 transmit buffers
dz0 at vsbus0 csr 0x200a0000 vec 304 ipl 14 maskbit 6
dz0: 4 lines
ncr0 at vsbus0 csr 0x200c0080 vec 770 ipl 14 maskbit 1
scsibus0 at ncr0: 8 targets, 8 luns per target
ncr1 at vsbus0 csr 0x200c0180 vec 774 ipl 14 maskbit 0
scsibus1 at ncr1: 8 targets, 8 luns per target
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 targ 0 lun 0: <DEC, RZ26 (C) DEC, T370> SCSI2 =
0/direct fixed
sd0: drive offline
st0 at scsibus0 targ 5 lun 0: <, , > SCSI1 1/sequential removable
st0: rogue, drive empty
scsibus1: waiting 2 seconds for devices to settle...
sd1 at scsibus1 targ 2 lun 0: <DEC, RZ24 (C) DEC, 211B> SCSI1 =
0/direct fixed
sd1: 200 MB, 1348 cyl, 8 head, 38 sec, 512 bytes/sect x 409792 sectors
ncr1: no REQ for next phase, abort
ncr1: no REQ while aborting, reset
ncr1: reset SCSI bus for TID=3D3 LUN=3D0
ncr1: no REQ for next phase, abort
ncr1: no REQ while aborting, reset
ncr1: reset SCSI bus for TID=3D3 LUN=3D0
ncr1: no REQ for next phase, abort
and it hangs here.=20
Does anybody know what the problem is?
Thanks,
--
frts
------=_NextPart_000_07E8_01BF773A.CE35BCE0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content=3D"text/html; charset=3Diso-8859-1" =
http-equiv=3DContent-Type>
<META content=3D"MSHTML 5.00.2919.6307" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Hello ,</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>I've got a VaxServer 3100 . =
</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>The problem is that NetBSD doesn't=20
recognise the RZ57-E in the strorage expansion box</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3D"Lucida Console" size=3D2>>>> sho=20
dev<BR> VMS/VMB ULTRIX =
ADDR =20
DEVTYP NUMBYTES RM/FX WP DEVNAM =20
REV<BR> ------- ------ -------- ------ =20
-------- ----- -- ------ =20
---<BR> ESA0 SE0 =20
08-00-2B-26-57-EA</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3D"Lucida Console" =
size=3D2> DKA0 =20
RZ0 A/0/0/00 DISK =
1.05=20
GB FX =
RZ26 =20
T370<BR> MKA500 TZ5 =
A/5/0/00 =20
TAPE ........ =20
RM<BR> ...HostID.... =20
A/6 INITR</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3D"Lucida Console" size=3D2> DKB200 =20
RZ10 B/2/0/00 DISK =
209=20
MB FX =
RZ24 =20
211B<BR> DKB300 RZ11 B/3/0/00 =20
DISK 1.00 GB =20
FX RZ57 =20
5000<BR> ...HostID.... =20
B/6 INITR</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3D"Lucida Console" size=3D2>>>></FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3D"Lucida Console" size=3D2></FONT> </DIV>
<DIV><FONT face=3D"Lucida Console" size=3D2></FONT> </DIV>
<DIV><FONT face=3D"Lucida Console" size=3D2>NetBSD 1.4P (UVAXDMA) #0: =
Thu Jan 20=20
04:30:09 CET 2000<BR> =20
root@vax:/usr/users/frts/src/sys/arch/vax/compile/UVAXDMA</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3D"Lucida Console" size=3D2>MicroVAX<BR>cpu: =
KA41/42<BR>cpu:=20
Enabling primary cache, no secondary cache present<BR>total memory =3D =
24452=20
KB<BR>avail memory =3D 19664 KB<BR>using 331 buffers containing 1324 KB =
of=20
memory<BR>mainbus0 (root)<BR>vsbus0 at mainbus0<BR>vsbus0: interrupt =
mask=20
8<BR>le0 at vsbus0 csr 0x200e0000 vec 120 ipl 14 maskbit 5<BR>le0: =
address=20
08:00:2b:26:57:ea<BR>le0: 32 receive buffers, 8 transmit buffers<BR>dz0 =
at=20
vsbus0 csr 0x200a0000 vec 304 ipl 14 maskbit 6<BR>dz0: 4 lines<BR>ncr0 =
at vsbus0=20
csr 0x200c0080 vec 770 ipl 14 maskbit 1<BR>scsibus0 at ncr0: 8 targets, =
8 luns=20
per target<BR>ncr1 at vsbus0 csr 0x200c0180 vec 774 ipl 14 maskbit =
0<BR>scsibus1=20
at ncr1: 8 targets, 8 luns per target<BR>scsibus0: waiting 2 seconds for =
devices=20
to settle...<BR>sd0 at scsibus0 targ 0 lun 0: <DEC,=20
RZ26 (C) DEC, T370> SCSI2 0/direct =
fixed<BR>sd0:=20
drive offline<BR>st0 at scsibus0 targ 5 lun 0: <, , > SCSI1 =
1/sequential=20
removable<BR>st0: rogue, drive empty<BR>scsibus1: waiting 2 seconds for =
devices=20
to settle...<BR>sd1 at scsibus1 targ 2 lun 0: <DEC,=20
RZ24 (C) DEC, 211B> SCSI1 0/direct =
fixed<BR>sd1: 200=20
MB, 1348 cyl, 8 head, 38 sec, 512 bytes/sect x 409792 sectors<BR><FONT=20
face=3DArial>ncr1: no REQ for next phase, abort<BR>ncr1: no REQ while =
aborting,=20
reset<BR>ncr1: reset SCSI bus for TID=3D3 LUN=3D0<BR>ncr1: no REQ for =
next phase,=20
abort<BR>ncr1: no REQ while aborting, reset<BR>ncr1: reset SCSI bus for =
TID=3D3=20
LUN=3D0<BR>ncr1: no REQ for next phase, abort</FONT></FONT></DIV>
<DIV><FONT size=3D2></FONT> </DIV>
<DIV><FONT size=3D2><FONT face=3DArial>and it hangs here. =
</FONT></FONT></DIV>
<DIV><FONT size=3D2><FONT face=3DArial>Does anybody know what the =
problem=20
is?</FONT></FONT></DIV>
<DIV><FONT size=3D2><FONT face=3DArial></FONT></FONT> </DIV>
<DIV><FONT size=3D2><FONT face=3DArial>Thanks,</FONT></FONT></DIV>
<DIV><FONT size=3D2><FONT face=3DArial></FONT></FONT> </DIV>
<DIV><FONT size=3D2><FONT face=3DArial>--</FONT></FONT></DIV>
<DIV><FONT face=3DArial size=3D2>frts</FONT></DIV>
<DIV><FONT size=3D2><FONT =
face=3DArial><BR> </DIV></FONT></FONT></BODY></HTML>
------=_NextPart_000_07E8_01BF773A.CE35BCE0--