Creating an image of an OpenVMS disk

[urbancamo <mark%wickensonline.co.uk@localhost>]

Hi, I have been trying to create an image of an OpenVMS drive using dd, but
not having much success. The command I've tried is: 

aleph# dd if=/dev/sd3a of=orac-system-disk.iso
dd: /dev/sd3a: Device not configured

What I'm trying to do is use NetBSD to create an image of disks sd2 and sd3
so that I can mount them using the VAX simulator SIMH.

Can anyone provide any suggestions please? Thanks a lot, Mark.

Upon bootup I get the following relevant messages:

sd0 at scsibus0 target 0 lun 0: <DEC, RZ28M    (C) DEC, 0466> disk fixed
sd0: 2007 MB, 3045 cyl, 16 head, 84 sec, 512 bytes/sect x 4110480 sectors
sd0: sync (160.00ns offset 15), 8-bit (6.250MB/s) transfers, tagged queueing
sd1 at scsibus0 target 3 lun 0: <DEC, RZ28     (C) DEC, 435E> disk fixed
sd1: 2007 MB, 3045 cyl, 16 head, 84 sec, 512 bytes/sect x 4110480 sectors
sd1: sync (160.00ns offset 15), 8-bit (6.250MB/s) transfers, tagged queueing
cd0 at scsibus0 target 4 lun 0: <SONY, CD-ROM CDU-541, 4.5d> cdrom removable
cd0: async, 8-bit transfers
sd2 at scsibus0 target 5 lun 0: <COMPAQ, BD009122C6, B016> disk fixed
sd2: 8678 MB, 5273 cyl, 20 head, 168 sec, 512 bytes/sect x 17773524 sectors
sd2: sync (160.00ns offset 15), 8-bit (6.250MB/s) transfers, tagged queueing
sd3 at scsibus0 target 6 lun 0: <DEC, RZ1CF-CF (C) DEC, 1614> disk fixed
sd3: 4091 MB, 3708 cyl, 20 head, 113 sec, 512 bytes/sect x 8380080 sectors
sd3: sync (160.00ns offset 15), 8-bit (6.250MB/s) transfers, tagged queueing

-- 
View this message in context: 
http://www.nabble.com/Creating-an-image-of-an-OpenVMS-disk-tp24476514p24476514.html
Sent from the port-vax mailing list archive at Nabble.com.