Well, it seems to work :

Here is what i did :

my config file is "test" :

#-----------------------------------------------------------------------=20=

-----
kernel =3D "/root/netbsd-INSTALL_XEN3_DOMU"
# kernel =3D "/root/netbsd-XEN3_DOMU"
# ramdisk =3D "/boot/initrd.gz"
# builder=3D'linux'
memory =3D 128
name =3D "test"
# List of which CPUS this domain is allowed to use, default Xen picks
#cpus =3D ""         # leave to Xen to pick
#cpus =3D "0"        # all vcpus run on CPU0
#cpus =3D "0-3,5,^1" # run on cpus 0,2,3,5
# vcpus =3D 1
# vif =3D [ '', 'bridge=3Dxenbr1' ]
# vif =3D [ '', 'bridge=3Dbridge0' ]
# vif =3D [ '' ]
# vif =3D [ '', 'bridge=3Dxenbr0' ]
disk =3D [ 'phy:/dev/wd0h,0x03,w', 'phy:/dev/cd0a,0x04,r' ]
# disk =3D [ 'phy:/dev/wd0h,0x03,w' ]
root =3D "/dev/wd0d ro"
extra =3D "4"
#-----------------------------------------------------------------------=20=

-----

With this, I have successfully install NetBSD.DomU ...

But at this point I still have no network :(

I've tried many configuration parameters in xend-config.sxp without =20
any success

Any idea ?

Le 16 juil. 06 =E0 18:18, KlinT a =E9crit :

>
> Well,
>
> I've made some tests and read some documentation .... :D
>
> I forgot to start xenbackend daemon :D This solve the error I've =20
> posted before without using "0x03" :
>
> =3D=3D> xbdback: can' read backend/vbd/1/3/handle: 79
>
> But the "xm create" still not work ... :(
>
> =3D=3D> Error: Device 0 (vif) could not be connected. Hotplug scripts =
not
>
> Any idea ?
>
> Do I need a ifconfig.bridge0 like in xen 2.0.7 ?
>
> Is there any parameters to setup in xend-config.sxp ?
>
> Many thanks ...
>
> Arnaud
>
> Le 16 juil. 06 =E0 10:50, KlinT a =E9crit :
>
>>
>> Le 16 juil. 06 =E0 10:40, Juan RP a =E9crit :
>>
>>> On Sun, 16 Jul 2006 10:23:42 +0200
>>> KlinT <klint@klintcentral.net> wrote:
>>>
>>> [...]
>>>
>>>> xm create -c ./test
>>>> Using config file "./test".
>>>> Error: Device 0 (vif) could not be connected. Hotplug scripts not
>>>> working.
>>>>
>>>> Here is my config file :
>>>>
>>>> kernel =3D "/root/netbsd-INSTALL_XEN3_DOMU"
>>>> # kernel =3D "/root/netbsd-XEN3_DOMU"
>>>> memory =3D 128
>>>> name =3D "test"
>>>> cpus =3D ""
>>>> vif =3D [ 'bridge=3Dbridge0' ]
>>>> disk =3D [ 'phy:/dev/wd0h,wd0d,w' ]
>>>> root =3D "/dev/wd0d ro"
>>>
>>> I read through the archives and looks like you need to change wd0d
>>> to 0x03.
>>>
>>
>> Yeah, this solve a part of my problem ...
>>
>> xm create -c ./test
>> Using config file "./test".
>> Error: Device 0 (vif) could not be connected. Hotplug scripts not =20
>> working.
>>
>> Same error :D
>>
>> But, this solves the following error :
>>
>> xbdback: can' read backend/vbd/1/3/handle: 79
>>
>> Maybe I missed the VIF/Bridge configuration
>>
>> many thanks
>>
>> Best regards
>>
>> arnaud.
>
>