bonjour,

Oui, le user appartenait bien au groupe wheel...
J'ai solutionné le problème comme ceci:

#mv /etc/group.orig /etc/group
#usermod -G wheel user

Peut-être une erreur d'écriture...

Merci pour ta réponse.
Philippe


> Salut,
>
> > Bonsoir,
> >
> > En essayant d'installer Abiword, j'obtiens un curieux:
> >
> > ===> Installing for lzo-2.02
> > install: unknown group wheel
> > *** Error code 1
> >
>
> Il existe ton group wheel ?
> Ton user est dedans ?
>
> `grep wheel /etc/group`
>
>
> > Stop.
> >
> >
> > Pourquoi ne reconnait-il pas le groupe wheel ?
> >
> > Merci pour votre aide.
> > Philippe
> >
> >
> >
> >
> > # cd /usr/pkgsrc/editors/abiword
> > # make install clean
> > => Bootstrap dependency digest>=20010302: digest-20070803 found
> > ===> Skipping vulnerability checks.
> > WARNING: No /usr/pkgsrc/distfiles/pkg-vulnerabilities file found.
> > WARNING: To fix, install the pkgsrc/security/audit-packages
> > WARNING: package and run: ``/usr/pkg/sbin/download-vulnerability-list''.
> > => Checksum SHA1 OK for abiword-2.4.6.tar.bz2
> > => Checksum RMD160 OK for abiword-2.4.6.tar.bz2
> > ===> Installing dependencies for abiword-2.4.6nb4
> > ==========================================================================
> > The supported build options for abiword are:
> >
> >         gucharmap
> >
> > You can select which build options to use by setting PKG_DEFAULT_OPTIONS
> > or the following variable.  Its current value is shown:
> >
> >         PKG_OPTIONS.abiword (not defined)
> >
> > ==========================================================================
> > ==========================================================================
> > The following variables will affect the build process of this package,
> > abiword-2.4.6nb4.  Their current value is shown below:
> >
> >         * FAM_DEFAULT = fam
> >
> > Based on these variables, the following variables have been set:
> >
> >         * FAMBASE (defined, but empty)
> >         * FAM_TYPE = fam
> >
> > You may want to abort the process now with CTRL-C and change their value
> > before continuing.  Be sure to run `/usr/bin/make clean' after
> > the changes.
> > ==========================================================================
> > => Build dependency libtool-base>=1.5.18nb5: libtool-base-1.5.24nb5 found
> > => Build dependency gmake>=3.78: gmake-3.81 found
> > => Build dependency perl>=5.0: perl-5.8.8nb4 found
> > => Build dependency pkg-config>=0.19: pkg-config-0.21nb1 found
> > => Build dependency x11-links>=0.25: x11-links-0.31 found
> > => Build dependency randrproto>=1.2.0: randrproto-1.2.1 found
> > => Full dependency xdg-dirs>=1.1: xdg-dirs-1.4 found
> > => Full dependency fribidi>=0.10.4nb1: fribidi-0.10.4nb1 found
> > => Full dependency wv>=1.2.4nb1: NOT found
> > => Verifying reinstall for ../../converters/wv
> > => Bootstrap dependency digest>=20010302: digest-20070803 found
> > ===> Skipping vulnerability checks.
> > WARNING: No /usr/pkgsrc/distfiles/pkg-vulnerabilities file found.
> > WARNING: To fix, install the pkgsrc/security/audit-packages
> > WARNING: package and run: ``/usr/pkg/sbin/download-vulnerability-list''.
> > => Checksum SHA1 OK for wv-1.2.4.tar.gz
> > => Checksum RMD160 OK for wv-1.2.4.tar.gz
> > ===> Installing dependencies for wv-1.2.4nb3
> > ==========================================================================
> > The following variables will affect the build process of this package,
> > wv-1.2.4nb3.  Their current value is shown below:
> >
> >         * FAM_DEFAULT = fam
> >
> > Based on these variables, the following variables have been set:
> >
> >         * FAMBASE (defined, but empty)
> >         * FAM_TYPE = fam
> >
> > You may want to abort the process now with CTRL-C and change their value
> > before continuing.  Be sure to run `/usr/bin/make clean' after
> > the changes.
> > ==========================================================================
> > => Build dependency libtool-base>=1.5.18nb5: libtool-base-1.5.24nb5 found
> > => Build dependency gmake>=3.78: gmake-3.81 found
> > => Build dependency pkg-config>=0.19: pkg-config-0.21nb1 found
> > => Build dependency x11-links>=0.25: x11-links-0.31 found
> > => Full dependency libgsf>=1.14.3nb1: NOT found
> > => Verifying reinstall for ../../devel/libgsf
> > => Bootstrap dependency digest>=20010302: digest-20070803 found
> > ===> Skipping vulnerability checks.
> > WARNING: No /usr/pkgsrc/distfiles/pkg-vulnerabilities file found.
> > WARNING: To fix, install the pkgsrc/security/audit-packages
> > WARNING: package and run: ``/usr/pkg/sbin/download-vulnerability-list''.
> > => Checksum SHA1 OK for libgsf-1.14.7.tar.bz2
> > => Checksum RMD160 OK for libgsf-1.14.7.tar.bz2
> > ===> Installing dependencies for libgsf-1.14.7nb2
> > ==========================================================================
> > The following variables will affect the build process of this package,
> > libgsf-1.14.7nb2.  Their current value is shown below:
> >
> >         * FAM_DEFAULT = fam
> >
> > Based on these variables, the following variables have been set:
> >
> >         * FAMBASE (defined, but empty)
> >         * FAM_TYPE = fam
> >
> > You may want to abort the process now with CTRL-C and change their value
> > before continuing.  Be sure to run `/usr/bin/make clean' after
> > the changes.
> > ==========================================================================
> > => Build dependency libtool-base>=1.5.18nb5: libtool-base-1.5.24nb5 found
> > => Build dependency intltool>=0.35: intltool-0.36.2 found
> > => Build dependency gmake>=3.78: gmake-3.81 found
> > => Build dependency perl>=5.0: perl-5.8.8nb4 found
> > => Build dependency pkg-config>=0.19: pkg-config-0.21nb1 found
> > => Full dependency libbonobo>=2.10.1nb2: libbonobo-2.18.0 found
> > => Full dependency gnome-vfs>=2.18.1nb2: NOT found
> > => Verifying reinstall for ../../sysutils/gnome-vfs
> > => Bootstrap dependency digest>=20010302: digest-20070803 found
> > ===> Skipping vulnerability checks.
> > WARNING: No /usr/pkgsrc/distfiles/pkg-vulnerabilities file found.
> > WARNING: To fix, install the pkgsrc/security/audit-packages
> > WARNING: package and run: ``/usr/pkg/sbin/download-vulnerability-list''.
> > => Checksum SHA1 OK for gnome-vfs-2.18.1.tar.bz2
> > => Checksum RMD160 OK for gnome-vfs-2.18.1.tar.bz2
> > ===> Installing dependencies for gnome-vfs-2.18.1nb3
> > ==========================================================================
> > The following variables will affect the build process of this package,
> > gnome-vfs-2.18.1nb3.  Their current value is shown below:
> >
> >         * BDB185_DEFAULT = db1
> >         * BDB_DEFAULT = db4
> >         * FAM_DEFAULT = fam
> >         * KRB5_DEFAULT = heimdal
> >         * SSLBASE = /usr
> >         * SSLCERTS = /etc/openssl/certs
> >         * SSLDIR = /etc/openssl
> >         * SSLKEYS = /etc/openssl/private
> >
> > Based on these variables, the following variables have been set:
> >
> >         * BDBBASE = /usr
> >         * BDB_LIBS (defined, but empty)
> >         * BDB_TYPE = db1
> >         * FAMBASE (defined, but empty)
> >         * FAM_TYPE = fam
> >         * KRB5BASE (defined, but empty)
> >         * KRB5_TYPE = heimdal
> >
> > You may want to abort the process now with CTRL-C and change their value
> > before continuing.  Be sure to run `/usr/bin/make clean' after
> > the changes.
> > ==========================================================================
> > => Build dependency libtool-base>=1.5.18nb5: libtool-base-1.5.24nb5 found
> > => Build dependency intltool>=0.35: intltool-0.36.2 found
> > => Build dependency gmake>=3.78: gmake-3.81 found
> > => Build dependency perl>=5.0: perl-5.8.8nb4 found
> > => Build dependency pkg-config>=0.19: pkg-config-0.21nb1 found
> > => Full dependency gnutls>=1.6.3nb1: NOT found
> > => Verifying reinstall for ../../security/gnutls
> > => Bootstrap dependency digest>=20010302: digest-20070803 found
> > ===> Skipping vulnerability checks.
> > WARNING: No /usr/pkgsrc/distfiles/pkg-vulnerabilities file found.
> > WARNING: To fix, install the pkgsrc/security/audit-packages
> > WARNING: package and run: ``/usr/pkg/sbin/download-vulnerability-list''.
> > => Checksum SHA1 OK for gnutls-2.0.0.tar.bz2
> > => Checksum RMD160 OK for gnutls-2.0.0.tar.bz2
> > ===> Installing dependencies for gnutls-2.0.0
> > => Build dependency libtool-base>=1.5.18nb5: libtool-base-1.5.24nb5 found
> > => Build dependency gmake>=3.78: gmake-3.81 found
> > => Full dependency lzo>=2.01: NOT found
> > => Verifying reinstall for ../../archivers/lzo
> > => Bootstrap dependency digest>=20010302: digest-20070803 found
> > ===> Skipping vulnerability checks.
> > WARNING: No /usr/pkgsrc/distfiles/pkg-vulnerabilities file found.
> > WARNING: To fix, install the pkgsrc/security/audit-packages
> > WARNING: package and run: ``/usr/pkg/sbin/download-vulnerability-list''.
> > ===> Installing for lzo-2.02
> > install: unknown group wheel
> > *** Error code 1
> >
> > Stop.
> > make: stopped in /usr/pkgsrc/archivers/lzo
> > *** Error code 1
> >
> > Stop.
> > make: stopped in /usr/pkgsrc/archivers/lzo
> > *** Error code 1
> >
> > Stop.
> > make: stopped in /usr/pkgsrc/archivers/lzo
> > *** Error code 1
> >
> > Stop.
> > make: stopped in /usr/pkgsrc/security/gnutls
> > *** Error code 1
> >
> > Stop.
> > make: stopped in /usr/pkgsrc/sysutils/gnome-vfs
> > *** Error code 1
> >
> > Stop.
> > make: stopped in /usr/pkgsrc/devel/libgsf
> > *** Error code 1
> >
> > Stop.
> >
> >
> >
> >
> >
> >
> >
> >
>
>
>