Re: CVS commit: src/sys/dev/usb

[Rin Okuyama <rokuyama.rk%gmail.com@localhost>]

Hi,

I tested StarTech USB21000S2 with Pine A64+. It works well
with multiple outstanding transfers. If I understand correctly,
Pine A64+ and Pinebook have (almost?) same SoC. If so, there
should be the problem elsewhere than host controller itself.

Robert, could you please test it with powered USB hub when
you have a time?

Thanks,
rin

On 2019/02/06 21:08, Rin Okuyama wrote:
> Sorry for my long silence.
>
> On 2019/01/31 23:20, Robert Swindells wrote:
> ...
> > The revision number of my device is "1".
> >
> > Robert Swindells
>
> Hmm, both of my adapters have same revision of "1":
>
> * StarTech USB21000S2
>
> mue1 at uhub3 port 2
> mue1: WS (0x424) USB Gigabit LAN (0x7500), rev 2.00/1.00, addr 10
> mue1: LAN7500 id 0x7500 rev 0x1
> mue1: Ethernet address ....
> ukphy1 at mue1 phy 1: OUI 0x00800f, model 0x000e, rev. 12
> ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
>
> * Z-TEK ZE582
>
> mue1 at uhub3 port 2
> mue1: SMSC (0x424) LAN7500 (0x7500), rev 2.00/1.00, addr 10
> mue1: LAN7500 id 0x7500 rev 0x1
> mue1: Ethernet address ....
> ukphy1 at mue1 phy 1: OUI 0x00800f, model 0x000e, rev. 12
> ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
>
> Multiple outstanding transfers work for both on RPI3B+ (dwctwo) and
> ThinkPad X60 (ehci).
>
> Seems like problems on the host controller of Pinebook...
>
> Thanks,
> rin