Source-Changes-D archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: CVS commit: src
Hi Roy,
On Mon, Oct 12, 2020 at 03:56:44PM +0100, Roy Marples wrote:
> Can you explain how it was not functional before and how this fixes it?
I think the change was well described in the same commit in the manual
page updates that you did not quote in your message. The "rtsol" keyword
is used to enable the processing of router advertisement messages in
order to pickup the IPv6 default routes as advertised by the routers on
the network. Previously such processing was done in the kernel, but that
code has been removed. This change updates the etc/rc.d/network script
to restore the previous functionality of the "rtsol" keyword by starting
dhcpcd with the necessary options to have it do the work that previously
was done in the kernel.
The key points are to:
- not interfere with (static) IPv4 configuration
- only update the IPv6 routing table, not the IPv6 address configuration
I also think it is very good that with this change we once again have
backwards compatibility for configuring static network addressing.
For the curious, this is what I observed at boot before the change:
IPv6 mode: host
Configuring network interfaces: vioif0.
Adding interface aliases:.
route: writing to routing socket: File exists
add net default: gateway 198.51.100.129: File exists
Waiting for duplicate address detection to finish...
I was also getting repeated errors from ntpd due to DNS lookups failing
(as in my configuration they depend on IPv4 routing working).
Looking at dhcpcd processes, this is what was running:
myhost$ ps -axuww | grep dhcp
_dhcpcd 255 0.0 0.0 22824 1396 ? I 10:13PM 0:00.00 dhcpcd: [BPF BOOTP] vioif0
_dhcpcd 505 0.0 0.0 22964 1972 ? I 10:13PM 0:00.00 dhcpcd: [master] [ip4] [ip6]
root 506 0.0 0.0 22824 1512 ? I 10:13PM 0:00.00 dhcpcd: [privileged actioneer]
_dhcpcd 507 0.0 0.0 22820 1364 ? I 10:13PM 0:00.00 dhcpcd: [network proxy]
_dhcpcd 508 0.0 0.0 22756 1316 ? I 10:13PM 0:00.00 dhcpcd: [control proxy]
This is how the interface was configured (dhcpcd had added IPv4 LL):
myhost$ ifconfig vioif0
vioif0: flags=0x8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ec_capabilities=0x1<VLAN_MTU>
ec_enabled=0
address: 82:1a:bd:99:c1:39
status: active
inet 198.51.100.134/28 broadcast 198.51.100.143 flags 0
inet 169.254.25.10/16 broadcast 169.254.255.255 flags 0
inet6 fe80::801a:bdff:fe99:c139%vioif0/64 flags 0 scopeid 0x1
inet6 2001:db8::134/64 flags 0
This is what was in the IPv4 routing table (presumably dhcpcd had added
the odd default route without a next hop address):
myhost$ netstat -rnf inet
Routing tables
Internet:
Destination Gateway Flags Refs Use Mtu Interface
default link#1 UC - - - vioif0
198.51.100.128/28 link#1 UC - - - vioif0
198.51.100.134 link#1 UHl - - - lo0
127/8 127.0.0.1 UGRS - - 33624 lo0
127.0.0.1 lo0 UHl - - 33624 lo0
169.254/16 link#1 UC - - - vioif0
169.254.25.10 link#1 UHl - - - lo0
Here is the configuration that I'm using in rc.conf and that works
without issues with my change to etc/rc.d/network:
hostname=myhost.example.com
defaultroute=198.51.100.129
ifconfig_vioif0='
inet 198.51.100.134/28
inet6 2001:db8::134/64 alias
rtsol
'
dns_search='site.example.com example.com'
dns_nameservers='10.1.1.11 10.2.1.11'
dns_options='timeout:1 attempts:5 edns0 no-tld-query'
My preference for a static address configuration would be to also use
defaultroute6, but since on some of my networks the routers do not
support VRRP v3, I cannot configure an IPv6 address in VRRP to be used
as the default gateway.
Kind regards,
+ Kimmo
Home |
Main Index |
Thread Index |
Old Index