[src/trunk]: src/share/man/man7 Add missing .El. Replace Ta outside its defin...

[wiz <wiz%NetBSD.org@localhost>]

details:   https://anonhg.NetBSD.org/src/rev/7567478b28b6
branches:  trunk
changeset: 319262:7567478b28b6
user:      wiz <wiz%NetBSD.org@localhost>
date:      Wed May 23 07:06:45 2018 +0000

description:
Add missing .El. Replace Ta outside its defined usage with No (no change
to text output).

diffstat:

 share/man/man7/signal.7 |  68 ++++++++++++++++++++++++------------------------
 1 files changed, 34 insertions(+), 34 deletions(-)

diffs (truncated from 308 to 300 lines):

diff -r ccdb9938c37a -r 7567478b28b6 share/man/man7/signal.7
--- a/share/man/man7/signal.7   Wed May 23 06:08:01 2018 +0000
+++ b/share/man/man7/signal.7   Wed May 23 07:06:45 2018 +0000
@@ -1,4 +1,4 @@
-.\"    $NetBSD: signal.7,v 1.21 2018/05/22 02:31:57 kamil Exp $
+.\"    $NetBSD: signal.7,v 1.22 2018/05/23 07:06:45 wiz Exp $
 .\"
 .\" Copyright (c) 1999, 2016 The NetBSD Foundation, Inc.
 .\" All rights reserved.
@@ -152,10 +152,9 @@
 no-op with some signal operations.)
 .Pp
 Detailed descriptions of these signals follow.
-.Pp
 .Bl -tag -width "aaa"
 .\" ************
-.It Dv SIGHUP (Hangup)
+.It Dv SIGHUP No (Hangup)
 This signal is generated by the tty driver
 .Xr tty 4
 to indicate a hangup condition on a process's controlling terminal:
@@ -169,7 +168,7 @@
 .Dv SIGHUP
 is 1, which is quite well known.
 .\" ************
-.It Dv SIGINT (Interrupt)
+.It Dv SIGINT No (Interrupt)
 This signal is generated by the tty driver
 .Xr tty 4
 when the user presses the interrupt character, normally control-C.
@@ -178,7 +177,7 @@
 .Dv SIGINT
 is 2.
 .\" ************
-.It Dv SIGQUIT Ta (Quit)
+.It Dv SIGQUIT No (Quit)
 This signal is generated by the tty driver
 .Xr tty 4
 when the user presses the quit character, normally control-backspace.
@@ -187,7 +186,7 @@
 .Dv SIGQUIT
 is 3.
 .\" ************
-.It Dv SIGILL Ta (Illegal instruction)
+.It Dv SIGILL No (Illegal instruction)
 This signal is generated synchronously by the kernel when the process
 executes an invalid instruction.
 The default action is to terminate the process and dump core.
@@ -198,7 +197,7 @@
 .Dv SIGILL
 is 4.
 .\" ************
-.It Dv SIGTRAP Ta (Trace/BPT trap)
+.It Dv SIGTRAP No (Trace/BPT trap)
 This signal is used when a process is being traced
 (see
 .Xr ptrace 2 )
@@ -211,7 +210,7 @@
 .Dv SIGTRAP
 is 5.
 .\" ************
-.It Dv SIGABRT Ta (Abort trap)
+.It Dv SIGABRT No (Abort trap)
 This signal is generated when the
 .Xr abort 3
 standard library function is called.
@@ -225,7 +224,7 @@
 as it was specific to the PDP-11 instruction
 .Dv iot .
 .\" ************
-.It Dv SIGEMT Ta (EMT trap)
+.It Dv SIGEMT No (EMT trap)
 In theory this signal is generated when an instruction needs to be
 emulated.
 .\"   XXX expand this -- I don't know, grep isn't helping much and
@@ -235,7 +234,7 @@
 .Dv SIGEMT
 is 7.
 .\" ************
-.It Dv SIGFPE Ta (Floating point exception)
+.It Dv SIGFPE No (Floating point exception)
 This signal is generated when an invalid floating point operation is
 detected by hardware or by a soft-float library.
 The default action is to terminate the process and dump core.
@@ -243,7 +242,7 @@
 .Dv SIGFPE
 is 8.
 .\" ************
-.It Dv SIGKILL Ta (Killed)
+.It Dv SIGKILL No (Killed)
 This signal cannot be caught or ignored.
 The (unconditional) action is to terminate the process.
 It is most often sent by system administrators, but is also generated
@@ -257,7 +256,7 @@
 .Dv SIGKILL
 is 9, which is extremely well known.
 .\" ************
-.It Dv SIGBUS Ta (Bus error)
+.It Dv SIGBUS No (Bus error)
 This signal is generated synchronously by the kernel when the process
 performs certain kinds of invalid memory accesses.
 The most common cause of
@@ -273,7 +272,7 @@
 .Dv SIGBUS
 is 10.
 .\" ************
-.It Dv SIGSEGV Ta (Segmentation fault)
+.It Dv SIGSEGV No (Segmentation fault)
 This signal is generated synchronously by the kernel when the process
 attempts to access unmapped memory, or access memory in a manner that
 the protection settings for that memory region do not permit.
@@ -294,7 +293,7 @@
 .Dv SIGSEGV
 is 11, which is very well known.
 .\" ************
-.It Dv SIGSYS Ta (Bad system call)
+.It Dv SIGSYS No (Bad system call)
 This signal is generated by the kernel, in addition to failing with
 .Er ENOSYS ,
 when a system call is made using an invalid system call number.
@@ -304,7 +303,7 @@
 .Dv SIGSYS
 is 12.
 .\" ************
-.It Dv SIGPIPE Ta (Broken pipe)
+.It Dv SIGPIPE No (Broken pipe)
 This signal is generated by the kernel, in addition to failing with
 .Er EPIPE ,
 when a
@@ -316,7 +315,7 @@
 .Dv SIGPIPE
 is 13.
 .\" ************
-.It Dv SIGALRM Ta (Alarm clock)
+.It Dv SIGALRM No (Alarm clock)
 This signal is generated by the kernel when a real-time timer expires.
 See
 .Xr alarm 3 ,
@@ -328,7 +327,7 @@
 .Dv SIGALRM
 is 14.
 .\" ************
-.It Dv SIGTERM Ta (Terminated)
+.It Dv SIGTERM No (Terminated)
 This signal is the default signal sent by
 .Xr kill 1
 and represents a user or administrator request that a program shut
@@ -341,7 +340,7 @@
 .Dv SIGTERM
 is 15.
 .\" ************
-.It Dv SIGURG Ta (Urgent I/O condition)
+.It Dv SIGURG No (Urgent I/O condition)
 This signal is generated when an ``urgent condition'' exists on a
 socket.
 In practice this means when
@@ -352,7 +351,7 @@
 .Dv SIGURG
 is 16.
 .\" ************
-.It Dv SIGSTOP Ta (Suspended (signal))
+.It Dv SIGSTOP No (Suspended (signal))
 This signal cannot be caught or ignored.
 The (unconditional) action is to stop the process.
 Note that like with
@@ -369,7 +368,7 @@
 .Dv SIGSTOP
 is 17.
 .\" ************
-.It Dv SIGTSTP Ta (Suspended)
+.It Dv SIGTSTP No (Suspended)
 This signal is generated by the tty driver
 .Xr tty 4
 when the user presses the stop character, normally control-Z.
@@ -378,7 +377,7 @@
 .Dv SIGTSTP
 is 18.
 .\" ************
-.It Dv SIGCONT Ta (Continued)
+.It Dv SIGCONT No (Continued)
 This signal is generated by the job-control feature of shells to
 manage processes.
 It causes the target process to start executing again after previously
@@ -391,7 +390,7 @@
 .Dv SIGCONT
 is 19.
 .\" ************
-.It Dv SIGCHLD Ta (Child exited, stopped or continued)
+.It Dv SIGCHLD No (Child exited, stopped or continued)
 This signal is generated by the kernel when one of a process's
 immediate children exits and can be waited for using one of the
 .Xr wait 2
@@ -417,7 +416,7 @@
 in old System V versions and today many systems provide both
 spellings.
 .\" ************
-.It Dv SIGTTIN Ta (Stopped (tty input))
+.It Dv SIGTTIN No (Stopped (tty input))
 This signal is generated by the tty driver
 .Xr tty 4
 when a process that is not in the foreground of its controlling
@@ -427,7 +426,7 @@
 .Dv SIGTTIN
 is 21.
 .\" ************
-.It Dv SIGTTOU Ta (Stopped (tty output))
+.It Dv SIGTTOU No (Stopped (tty output))
 This signal is generated by the tty driver
 .Xr tty 4
 when a process that is not in the foreground of its controlling
@@ -440,7 +439,7 @@
 .Dv SIGTTOU
 is 22.
 .\" ************
-.It Dv SIGIO Ta (I/O possible)
+.It Dv SIGIO No (I/O possible)
 This signal is sent by the kernel when I/O becomes possible on a file
 handle opened for asynchronous access with
 .Dv O_ASYNC .
@@ -453,7 +452,7 @@
 .Dv SIGIO
 is 23.
 .\" ************
-.It Dv SIGXCPU Ta (CPU time limit exceeded)
+.It Dv SIGXCPU No (CPU time limit exceeded)
 This signal is sent by the kernel when the amount of CPU time consumed
 exceeds the configured limit.
 See
@@ -472,7 +471,7 @@
 .Dv SIGXCPU
 is 24.
 .\" ************
-.It Dv SIGXFSZ Ta (File size limit exceeded)
+.It Dv SIGXFSZ No (File size limit exceeded)
 This signal is sent by the kernel when a write causes the size of a
 file to exceed the configured limit.
 See
@@ -491,7 +490,7 @@
 .Dv SIGXFSZ
 is 25.
 .\" ************
-.It Dv SIGVTALRM Ta (Virtual timer expired)
+.It Dv SIGVTALRM No (Virtual timer expired)
 This signal is generated by the kernel when a virtual-time (process
 execution time) timer expires.
 See
@@ -503,7 +502,7 @@
 .Dv SIGVTALRM
 is 26.
 .\" ************
-.It Dv SIGPROF Ta (Profiling timer expired)
+.It Dv SIGPROF No (Profiling timer expired)
 This signal is generated by the kernel when a profiling timer
 expires.
 See
@@ -515,7 +514,7 @@
 .Dv SIGPROF
 is 27.
 .\" ************
-.It Dv SIGWINCH Ta (Window size changed)
+.It Dv SIGWINCH No (Window size changed)
 This signal is generated by the tty driver
 .Xr tty 4
 when the stored window size of the process's controlling terminal has
@@ -525,7 +524,7 @@
 .Dv SIGWINCH
 is 28.
 .\" ************
-.It Dv SIGINFO Ta (Information request)
+.It Dv SIGINFO No (Information request)
 This signal is generated by the tty driver
 .Xr tty 4
 when the user presses the status request character, normally
@@ -535,7 +534,7 @@
 .Dv SIGINFO
 is 29.
 .\" ************
-.It Dv SIGUSR1 Ta (User defined signal 1)
+.It Dv SIGUSR1 No (User defined signal 1)
 This signal is not generated by the system and is made available for
 applications to use for their own purposes.
 Many daemons use it for restart or reload requests of various types.
@@ -544,7 +543,7 @@
 .Dv SIGUSR1
 is 30.
 .\" ************
-.It Dv SIGUSR2 Ta (User defined signal 2)
+.It Dv SIGUSR2 No (User defined signal 2)
 This signal is not generated by the system and is made available for
 applications to use for their own purposes.
 The default action is to terminate the process.
@@ -552,7 +551,7 @@
 .Dv SIGUSR2
 is 31.
 .\" ************
-.It Dv SIGPWR Ta (Power fail/restart)
+.It Dv SIGPWR No (Power fail/restart)
 This signal is notionally sent by the kernel or by a privileged
 monitor process when an external power failure is detected, and again
 when power has been restored.