[src/trunk]: src/sys/arch/evbarm/odroid Add the not connected bits

[reinoud <reinoud%NetBSD.org@localhost>]

details:   https://anonhg.NetBSD.org/src/rev/966bf8e6d4f5
branches:  trunk
changeset: 332498:966bf8e6d4f5
user:      reinoud <reinoud%NetBSD.org@localhost>
date:      Wed Sep 24 20:38:33 2014 +0000

description:
Add the not connected bits

While here, tweak the usb3503 attachment

diffstat:

 sys/arch/evbarm/odroid/odroid_machdep.c |  28 +++++++++++++++++++---------
 1 files changed, 19 insertions(+), 9 deletions(-)

diffs (66 lines):

diff -r 3c013a8aad0e -r 966bf8e6d4f5 sys/arch/evbarm/odroid/odroid_machdep.c
--- a/sys/arch/evbarm/odroid/odroid_machdep.c   Wed Sep 24 20:35:43 2014 +0000
+++ b/sys/arch/evbarm/odroid/odroid_machdep.c   Wed Sep 24 20:38:33 2014 +0000
@@ -1,4 +1,4 @@
-/*     $NetBSD: odroid_machdep.c,v 1.34 2014/09/21 20:49:31 reinoud Exp $ */
+/*     $NetBSD: odroid_machdep.c,v 1.35 2014/09/24 20:38:33 reinoud Exp $ */
 
 /*
  * Copyright (c) 2014 The NetBSD Foundation, Inc.
@@ -31,7 +31,7 @@
  */
 
 #include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: odroid_machdep.c,v 1.34 2014/09/21 20:49:31 reinoud Exp $");
+__KERNEL_RCSID(0, "$NetBSD: odroid_machdep.c,v 1.35 2014/09/24 20:38:33 reinoud Exp $");
 
 #include "opt_evbarm_boardtype.h"
 #include "opt_exynos.h"
@@ -643,6 +643,19 @@
        prop_dictionary_set_uint32(dict, "nc-GPG2", 0x03 - 0b00000000);
        prop_dictionary_set_uint32(dict, "nc-GPH0", 0x0f - 0b00000000);
        prop_dictionary_set_uint32(dict, "nc-GPH1", 0xff - 0b00000000);
+
+       prop_dictionary_set_uint32(dict, "nc-GPJ0", 0xff - 0b00000000);
+       prop_dictionary_set_uint32(dict, "nc-GPJ1", 0xff - 0b00000000);
+       prop_dictionary_set_uint32(dict, "nc-GPJ2", 0xff - 0b00000000);
+       prop_dictionary_set_uint32(dict, "nc-GPJ3", 0xff - 0b00000000);
+       prop_dictionary_set_uint32(dict, "nc-GPJ4", 0xff - 0b00000000);
+       prop_dictionary_set_uint32(dict, "nc-GPK0", 0xff - 0b00000000);
+       prop_dictionary_set_uint32(dict, "nc-GPK1", 0xff - 0b00000000);
+       /* usb3 overcur1{2,3} at bits 4,5, vbus1 at pin 7 */
+       prop_dictionary_set_uint32(dict, "nc-GPK2", 0xff - 0b10110000);
+       /* usb3 overcur0{2,3} at bits 0,1, vbus0 at pin 3 */
+       prop_dictionary_set_uint32(dict, "nc-GPK3", 0xff - 0b00001011);
+
        prop_dictionary_set_uint32(dict, "nc-GPV0", 0xff - 0b00000000);
        prop_dictionary_set_uint32(dict, "nc-GPV1", 0xff - 0b00000000);
        prop_dictionary_set_uint32(dict, "nc-ETC5", 0x03 - 0b00000000);
@@ -779,23 +792,20 @@
 
        /* pull intn low */
        exynos_gpio_pindata_ctl(&nint_pin, GPIO_PIN_PULLDOWN);
-       DELAY(10000);
 
        /* set hubconnect low */
        exynos_gpio_pindata_write(&hubconnect_pin, 0);
-       DELAY(10000);
 
        /* reset pin up again, hub enters RefClk stage */
        exynos_gpio_pindata_write(&nreset_pin, 1);
        DELAY(10000);
 
+       /* release intn */
+       exynos_gpio_pindata_ctl(&nint_pin, GPIO_PIN_TRISTATE);
+
        /* set hubconnect high */
        exynos_gpio_pindata_write(&hubconnect_pin, 1);
-       DELAY(10000);
-
-       /* release intn */
-       exynos_gpio_pindata_ctl(&nint_pin, GPIO_PIN_TRISTATE);
-       DELAY(10000);
+       DELAY(40000);
 
        /* DONE! */
 }