[src/trunk]: src/sys/dev/isa - Use aprint*() instead of printf() in the attac...

[msaitoh <msaitoh%NetBSD.org@localhost>]

details:   https://anonhg.NetBSD.org/src/rev/d5a19e7fc980
branches:  trunk
changeset: 346369:d5a19e7fc980
user:      msaitoh <msaitoh%NetBSD.org@localhost>
date:      Mon Jul 11 07:11:08 2016 +0000

description:
- Use aprint*() instead of printf() in the attach function.
- KNF.

diffstat:

 sys/dev/isa/if_eg.c |  24 ++++++++++++++----------
 1 files changed, 14 insertions(+), 10 deletions(-)

diffs (83 lines):

diff -r d6d2c45c1b5f -r d5a19e7fc980 sys/dev/isa/if_eg.c
--- a/sys/dev/isa/if_eg.c       Mon Jul 11 06:14:51 2016 +0000
+++ b/sys/dev/isa/if_eg.c       Mon Jul 11 07:11:08 2016 +0000
@@ -1,4 +1,4 @@
-/*     $NetBSD: if_eg.c,v 1.90 2016/06/10 13:27:14 ozaki-r Exp $       */
+/*     $NetBSD: if_eg.c,v 1.91 2016/07/11 07:11:08 msaitoh Exp $       */
 
 /*
  * Copyright (c) 1993 Dean Huxley <dean%fsa.ca@localhost>
@@ -40,7 +40,7 @@
  */
 
 #include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: if_eg.c,v 1.90 2016/06/10 13:27:14 ozaki-r Exp $");
+__KERNEL_RCSID(0, "$NetBSD: if_eg.c,v 1.91 2016/07/11 07:11:08 msaitoh Exp $");
 
 #include "opt_inet.h"
 
@@ -427,17 +427,18 @@
        }
        memcpy(myaddr, &sc->eg_pcb[2], ETHER_ADDR_LEN);
 
-       printf("%s: ROM v%d.%02d %dk address %s\n", device_xname(self),
+       aprint_normal_dev(self, "ROM v%d.%02d %dk address %s\n",
            sc->eg_rom_major, sc->eg_rom_minor, sc->eg_ram,
            ether_sprintf(myaddr));
 
        sc->eg_pcb[0] = EG_CMD_SETEADDR; /* Set station address */
        if (egwritePCB(iot, ioh, sc->eg_pcb) != 0) {
-               printf("%s: can't send Set Station Address\n", device_xname(self));
+               aprint_error_dev(self, "can't send Set Station Address\n");
                return;
        }
        if (egreadPCB(iot, ioh, sc->eg_pcb) != 0) {
-               aprint_error_dev(self, "can't read Set Station Address status\n");
+               aprint_error_dev(self,
+                   "can't read Set Station Address status\n");
                egprintpcb(sc->eg_pcb);
                return;
        }
@@ -491,10 +492,11 @@
                aprint_error_dev(sc->sc_dev, "can't send Configure 82586\n");
 
        if (egreadPCB(iot, ioh, sc->eg_pcb) != 0) {
-               aprint_error_dev(sc->sc_dev, "can't read Configure 82586 status\n");
+               aprint_error_dev(sc->sc_dev,
+                   "can't read Configure 82586 status\n");
                egprintpcb(sc->eg_pcb);
        } else if (sc->eg_pcb[2] != 0 || sc->eg_pcb[3] != 0)
-               aprint_error_dev(sc->sc_dev, "configure card command failed\n");
+               aprint_error_dev(sc->sc_dev,"configure card command failed\n");
 
        if (sc->eg_inbuf == NULL) {
                sc->eg_inbuf = malloc(EG_BUFLEN, M_TEMP, M_NOWAIT);
@@ -508,7 +510,7 @@
        if (sc->eg_outbuf == NULL) {
                sc->eg_outbuf = malloc(EG_BUFLEN, M_TEMP, M_NOWAIT);
                if (sc->eg_outbuf == NULL) {
-                       aprint_error_dev(sc->sc_dev, "can't allocate outbuf\n");
+                       aprint_error_dev(sc->sc_dev,"can't allocate outbuf\n");
                        panic("eginit");
                }
        }
@@ -588,7 +590,8 @@
        sc->eg_pcb[6] = len; /* length of packet */
        sc->eg_pcb[7] = len >> 8;
        if (egwritePCB(iot, ioh, sc->eg_pcb) != 0) {
-               aprint_error_dev(sc->sc_dev, "can't send Send Packet command\n");
+               aprint_error_dev(sc->sc_dev,
+                   "can't send Send Packet command\n");
                ifp->if_oerrors++;
                ifp->if_flags &= ~IFF_OACTIVE;
                m_freem(m0);
@@ -710,7 +713,8 @@
 
        if (len <= sizeof(struct ether_header) ||
            len > ETHER_MAX_LEN) {
-               aprint_error_dev(sc->sc_dev, "invalid packet size %d; dropping\n", len);
+               aprint_error_dev(sc->sc_dev,
+                   "invalid packet size %d; dropping\n", len);
                ifp->if_ierrors++;
                return;
        }